KTLP350TLD

KTLP350_15 COSMO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

Features

This unit is 8.lead DIP package. Input threshold current: I F =5mA(max.) Supply current ( I cc mA (max.) Supply voltage ( V cc ): 10 V Output cu rre nt (IO): ± .5A (max.) Switching time (tpLH/tpHL): 0.5µs(max.) Isolation voltage: 00Vrms(min.) MSL class 1 Agency Approvals UL Approved (No. E169586): UL1577 c UL Approved (No. E169586) VDE Approved (No. 40020973): DIN EN60747 Application s Transistor i nverter Inverter f or a ir c ondition e r IGBT g ate d rive Power MOS FET g ate d rive IH(Induction Heating) Truth Table The use of a 0.1μF bypass capacitor must be connected between pins 8 and 5 is recommended. LED OUTPUT ON HIGH LEVEL ON OFF OFF LOW LEVEL OFF ON

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Outside Dimension Unit mm Device Marking Notes: cosmo YWW Year c ode / WW: Week c ode cosmo Y W W 13.00 13.00 0.26 6.50 7.62 1.20 3.00 0.4 3.50 0.5 2.54 9.68 2.70 0.3 1.20 0.5 3.00 3.50 2.54 2.54 2.54 2.70 9.68 10.00 1.00 0.78 7.62 6.50 2.54 2.54 2.54 3.50 1.20 0.25 9.68 10° 6.50 7.62 10.16 0.90 ± 0.25 0.90 ± 0.25 11.80 0.25 +0.2 -0.5 TOLERANCE ±0.2mm 2.54 2.54 2.54 3.50 1.20 0.25 9.68 1.Dual-in-line type KTLP350 2.Surface mount type KTLP350S 3.Long creepage distance type KTLP350H 4.Long creepage distance for surface mount type KTLP350L

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Absolute Maximum Ratings (Ta = 25°C) Parameter Symbol Rating Unit Input Forward c urrent I F mA Forward c urrent d erating(Ta ΔI F / ΔTa 0.54 m A Peak t ransient f orward c urrent (*Note 1) I FPT A Reverse v oltage V R V Junction t emperature Tj 125 Output “H” Peak o utput c urrent (*Note 2) I OPH 2.5 A “L”Peak o utput c urrent (*Note 2) I OPL +2.5 A Output v oltage (Ta V O V Supply v oltage (Ta Vcc V Output v oltage d erating (Ta ΔV O / ΔTa 1.0 V Supply Voltage d erating(Ta ΔV CC /ΔTa 1.0 V Junction t emperature Tj 125 Operating f requency (*Note 3) f KhZ Operating t emperature r ange Topr 40~1 Storage t e mperature r ange Tstg 55~125 Lead s oldering t emperature(10s) (*Note 4) Tsol 260 Isolation v oltage (AC,1min.,R.H 60%) (*Note 5) BVs 5000 Vrms *Note1: Pulse width Pw 1μs,300pps. *Note2: Exporenential waveform pulse width Pw 0.3us,f 15kHz. *Note3: Exporenential waveform,IOPH 2.0A ( 0.3μs),IOPL +2.0A ( 0.3μs). *Note4: It is 2 mm or more from a lead root. *Note5: Device is consider e d as a two terminal device: Pin1,2,3 and 4 shorted together, and pins 5,6,7 and 8 shorted together.

Electrical Characteristics

(Ta = 25 Parameter Symbol Test Circuit Test Condition Min. Typ. Max. Unit Input forward voltage V F I F =10mA,Ta=25 1.6 1.8 V Temperature coefficient of forward vol tage V F Ta I F =10mA 2.0 mV/ Input reverse current I R VR=5V,Ta=25 μA Input capacitance C T V=0,f=1MHz,Ta=25 250 pF Output current “H” level I OPH V CC =30V I F =5mA Vb=3.5V 1.6 1.0 A V CC =15V I F =5mA Vb=7.0V 2.0

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER “L” level I OPL V CC =30V I F =0mA Va=2.5V 1.0 1.6 V CC =15V I F =0mA Va=7.5V 2.0 Output voltage “H” level V OH V CC 1=15V,V EE1 15V R L =200Ω,I F =5mA 13.7 V “L” level V OL V CC1 =15V,V EE1 15V R L =200Ω,V F =0.8V 14.9 12.5 Supply current “H” level I CCH V CC =30V,I F =10mA, Ta=25 3.0 mA “L” level I CCL V CC =30V,I F =0mA, Ta=25 3.0 Threshold input current “Output L→H” I FLH V CC1 =15V, Vo>1V,Io=0mA 1.8 mA Threshold input voltage “Output H→L” V FHL V CC1 =15V, Vo>1V,Io=0mA 0.8 V Supply voltage V CC V Capacitance (input output) C S Vs=0,f=1MHz,Ta=25 1.0 2.0 pF Resistance (input output ) R S Vs=500V,Ta=25 R.H. 1*10 Ω A l l t y p i c a l v a l u e s a r e a t T a A D u r a t i o n o f I O time 50μs(1 Pulse) S witching Characteristics (Ta = 25 Parameter Symbol Test Circuit Test Condition Min. Typ. Max. Unit Propagation delay time “L→H” t pLH IF=5mA (Note8) VCC=30V Rg=20Ω,Cg=10nF 260 500 ns “H→L” t pHL 260 500 Output rise time t r Output fall time t f Common mode transient immunity at high level output C MH V CM =1000Vp p,I F =5mA V CC =30V,Vo(min)=26V T a KV / μs Common mode transient immunity at low level output C ML V CM =1000 Vp p,I F V CC =30V, Vo(max)=1V T a KV / μs A l l t y p i c a l v a l u e s a r e a t T a *Note 8: Input signal rise time (fall time) < 0.5μs.

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Fig.1 F orward Current vs. Forward Voltage Fig.2 Ou tput Voltage vs. Forward Current Forward Current I F (mA) 0.01 0.8 1.0 1.4 1.2 1.6 0.03 0.05 0.3 0.5 0.1 100 1.8 2.0 Forward Voltage Temperature Coefficient V F / Ta (mV/ -1 .4 0 .1 0 .3 0 .5 -1 .8 -1 .6 -2 .2 -2 .0 -2 .6 -2 .4 1 0 3 0 Forward Voltage V F (V) Forward Current I F (mA) Fig.3 Allowable Forward Current vs. Ambient Temperature Fig.4 Supply Voltage vs. Ambient Temperature Allowable Forward Current I F (mA) -40 100 120 Supply Voltage Vcc (V) -40 100 120 Ambient Temperature Ta ( Ambient Temperature Ta ( Fig.5 Low Level Output Voltage vs. Ambient Te mperature Fig. High Level Output Voltage vs. Ambient Temperature Low Level Output Voltage V OL V -10 -15 -20 -25 -40 -20 100 VCC1=15V,VEE1=-15V RL=200Ω,VF=0.8V 120 High Level Output Voltage V OH V -40 -20 100 VCC1=15V,VEE1=-15V RL=200Ω,IF=5mA 120 Ambient Temperature Ta ( Ambient Temperature Ta

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Fig. Low L evel S upply C urrent vs. Ambient Temperature Fig. High L evel S upply C urrent vs. Ambient Temperature Low L evel S upply C urrent I CCL (mA) -40 -20 100 Vcc=30V 120 High L evel S upply C urrent I CCH (mA) -40 -20 100 Vcc=30V I =10mA 120 F Ambient Temperature Ta ( Ambient Temperature Ta ( Fig. Propagation D elay T ime vs. Ambient Temperature Propagation D elay T ime tPLH, tPHL (ns) 100 200 300 400 500 -40 -20 100 I =5mA,Vcc=30V, Rg=20Ω,Cg=10nF 120 F Ambient Temperature Ta ( Test Circuit Top View I OPL Measure

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER I OPH Measure V O H Measure V O L Measure tp LH, tp HL, t t Measure 100Ω I F 104PF R g V O c g V CC       V O I F       V OH 80% V OL 80% GND

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER C MH, C ML, Measure S W :B (IF = 0 ) S W :A (IF = 5 m A ) 9 0 %   1 0 % V C M   1 V 2 6 V C M L C M H 1 0 0 0 V C ML C MH 800(V) t r ( μ 800(V) t f ( μ ML MH ) is the maximum rate of rise (fall) of the common mode voltage that can be sustained with the output voltage in the low (high) state.

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Recommended Soldering Conditions (a) Infrared reflow soldering Peak reflow soldering Time of peak reflow temperature Time of temperature higher than 230 Time to preheat t emperature from 180~190 Time(s) of reflow Flux or below (package surface temperature) 10 sec 60 sec 120 sec Two Rosin flux c ontaining small amount of chlorine (The f lux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 6 0 -1 2 0 se c 3 0 -6 0 s e c t (s) temperature 1 0 se c M a x. (b) Wave soldering Temperature Time Preheating conditions T ime s ) of reflow Flux 260 or below (molten solder temperature) 10 seconds or less 120 or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions Fluxes Avoid removing the residual flux with f reon based and chlorine based cleaning solvent Avoid shorting between portion of frame and leads.

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Numbering System K TLP3 X Y Note K TLP35 = Part No. X Lead f orm option blank S H L Y Tape and r eel option ( TL TR TLD TRU Option

Description

S (TL surface mount type package + TL tape & reel option 000 u n its per reel S (TR surface mount type package + TR tape & reel option 000 u n its per reel L (TLD long cree page distance for surface mount type package T LD tape & reel option 00 u n its per reel L (TRU) long creepage distance for surface mount type package TRU tape & reel option 00 u n its per reel Recommended P ad L ayout for S urface M ount L ead F orm 2.54 2.54 1.5 1.9 2.54 2.54 1.5 1.9 8-pin SMD 8-pin L 8.3 2.54 10.7 2.54 1.Surface mount type 2.Long creepage distance for surface mount type U nit : mm

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER pin SMD Carrier T ape & Reel Direction of feed from reel TL Direction of feed from reel TR unit mm Quantity 1000 pcs/reel

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER pin L Carrier T ape & Reel 12.35±0.10 11.50±0.10 24.00±0.30 12.00±0.10 4.00±0.10 2.00±0.10 1.75±0.10 TLD Direction of feed from reel 24.40 30.40 Max. +0.20 -0.00 100±0.50 13.0±0.20 330 Max. Quantity 800 pcs/reel Unit:mm TOLERANCE ±0.2mm TRU Direction of feed from reel

ctronics Corp. Document No. 9P51008 http://www.cosmo ic.com cosmo KTLP35 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Application N otice The content of datasheet is the guidance for product use onl y. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, mat erials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal c omputer b. OA machine c. Audio / Video d. Instrumentation e. Electrical a pplication f. Measurem ent equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control This publication is the propert y of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expres sed f r o m cosmo.