KTLP3503_15 COSMO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

Pb free and RoHS compliant 400V peak blocking voltage On State R.M.S Current 0.5A Simplifies logic control of 115 VAC power Zero voltage crossing Isolation voltage between input and output (Viso 5300Vms) MSL class 1 Agency Approvals UL Approved No. E169586 ): UL1577 c UL Approved ( No. E169586 VDE Approved No. 40020973 ): DIN EN60747 Application s TRIAC d river Programmable c ontrollers AC output m odule Solid s tate r elay Isolated interface between high voltage AC device s and lower voltage DC control ci rcuitry Switching motors, fans, heaters, solenoids and valves Phase or power control in applications such as lighting and t emperature control equipment

Cosmo Electronics Corp. Document No. 9P46001 http://www.cosmo ic.com cosmo K TLP 503 Series PIN ZERO CROSS TRIAC DRIVER PHOTOCOUPLER Outside Dimension Unit mm 13.00 0.25 13.00 7.62 6.50 1.20 3.00 0.40 0.50 2.54 2.70 3.50 9.68 10° ±0.2 0.25 3.50 6.50 7.62 10.16 0.90±0.25 0.90±0.25 11.80 +0.2 -0.5 2.54 1.20 9.68 6.50 0.25 9.68 3.50 3.00 0.30 1.20 0.50 2.54 2.70 2.54 7.62 10.16±0.50 1.00 10.00±0.4 6.50 7.62 3.50 2.54 1.20 0.10±0.1 0.25 9.68 10° KTLP3503 KTLP3503S KTLP3503L KTLP3503H TOLERANCE ±0.2mm 3. Long creepage distance type. 4. Long creepage distance for surface mount type. 1. Dual-in-line type. 2. Surface mount type. Device Marking cosmo 3503 YWW Notes cosmo YWW Y Year code / W Week code

Cosmo Electronics Corp. Document No. 9P46001 http://www.cosmo ic.com cosmo K TLP 503 Series PIN ZERO CROSS TRIAC DRIVER PHOTOCOUPLER Absolute Maximum Ratings (Ta=25 Parameter Symbol Rating Unit Input Forward current I F mA Peak forward current I FM A Reverse voltage V R V Power dissipation P D mW Output Off s tate output t erminal voltage V DRM V PEAK On s tate R.M.S. c urrent I T(RMS) 0.5 A Peak r epetitive surge c urrent 60Hz , Peak I TS M A Isolation voltage 1 minute V iso Vrms Operating temperature T opr 40 to + 115 Storage temperature T stg 50 to +125 Soldering temperature 10 second s T sol 260 Electro optical Characteristics (Ta=25 Parameter Symbol Conditions M in T yp M ax Unit Input Forward voltage V F I F =10mA 1.2 1.4 V Reverse current I R V R =4V μ A Output Peak b locking c urrent I DRM V DRM R a ted 100 μ A O n s tate v oltage V TM I TM 0.5 A V Tran s fer charac teristics Holding c urrent I H mA Critical rate of rise of off state voltage d v /dt V DRM =(1/ )*Rated 1000 μ s Inhibit voltage (MT1 MT2 v oltage above which device will not trigger V INH I F Rated I FT V Leakage in i nhibited s tate I DRM2 I F =Rated I FT , Rated V DRM Off State 200 μ A Isolation resistance R iso DC500V 5x10 Ω Minimum trigger current I FT Main t erminal v oltage=3V mA

Cosmo Electronics Corp. Document No. 9P46001 http://www.cosmo ic.com cosmo K TLP 503 Series PIN ZERO CROSS TRIAC DRIVER PHOTOCOUPLER Fig.1 Forward C urrent e Fig.2 On State R.M.S. C urrent vs. Ambient T emperatur e vs. Ambient T emperature Forward Current I F ( mA ) -40 -20 100 115 On state Current I TM ( mA ) -40 -20 100 115 0.1 0.2 0.3 0.4 0.5 0.6 Ambient Temperature Ta ( Ambient Temperature Ta ( Fig. Peak Forward Current Fig. Forward Current vs. Duty Ratio vs. Forward Voltage Peak Forward Current I FT ( mA ) 100 1000 10000 Pulse width <= 100us Ta=25°C Forward Current I F ( mA ) 10 0 10 00 0.5 1 .0 1.5 2 .0 2 .5 3 .0 50 0 20 0 T a= 75°C 50°C 25°C 0°C -25°C Duty Ratio Forward Voltage (V) Fig. Trigger Current Fig.6 Inhibited Voltage v s Ambient Temperature vs Ambient Temperature I FT , Normalized -40 -20 100 115 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Normalized to Ta=25°C V INH Normalized -40 -20 100 115 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 Ambient Temperature Ta ( Ambient Temperature Ta (

Cosmo Electronics Corp. Document No. 9P46001 http://www.cosmo ic.com cosmo K TLP 503 Series PIN ZERO CROSS TRIAC DRIVER PHOTOCOUPLER Fig.7 On s tate C haracteristics Fig. Leakage with LED off vs. Ambient Temperature On state Current I TM A ) -0.8 -0.6 -0.4 -0.2 +0.2 +0.4 +0.6 +0.8 Output pulse width 80us I =30mA, f=60Hz, Ta=25°C F Peak Blocking Current ( nA ) 0.1 -40 -20 100 115 100 On state Volt age (V) Ambient Temperature Ta (

Cosmo Electronics Corp. Document No. 9P46001 http://www.cosmo ic.com cosmo K TLP 503 Series PIN ZERO CROSS TRIAC DRIVER PHOTOCOUPLER Recommended Soldering Conditions (a) Infrared reflow soldering Peak reflow soldering Time of peak reflow temperature Time of temperature higher than 230 Time to preheat t emperature from 180~190 Time(s) of refl ow Flux or below (package surface temperature) 10 sec 60 sec 120 sec Two Rosin flux containing small amount of chlorine (The f lux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 6 0 -1 2 0 se c 3 0 -6 0 s e c t (s) temperature 1 0 se c M a x. (b) Wave soldering Temperature Time Preheating conditions T ime s ) of reflow Flux 260 or below (molten solder temperature) 10 seconds or less 120 or below (package surface temperature) One Rosin flux containing smal l amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions Fluxes Avoid removing the residual flux with f reon based and chlorine based cleaning solvent Avoid shorting between portion of frame and leads.

Cosmo Electronics Corp. Document No. 9P46001 http://www.cosmo ic.com cosmo K TLP 503 Series PIN ZERO CROSS TRIAC DRIVER PHOTOCOUPLER Numb er ing System K TLP3 X Y Note s K TLP3 = Part No. X = Lead f orm option ( blank S H L Y = Tape and r eel option ( TL TR TLD TRU Option

Description

S (TL) surface mount type package + TL tape & reel option 1000 u n its p er reel S (TR) surface mount type package + TR tape & reel option 1000 un its per reel L (TLD) long creepage distance for surface mount type package TLD tape & reel option 00 un its per reel L (TRU) long creepage distance for surface mount type packag e TRU tape & reel option 00 u n its per reel Recommended P ad Layout for Surface Mount Lead F orm 1.5 1.9 1.5 1.9 8-pin SMD 8-pin L 8.3 2.54 10.7 2.54 1. Surface mount type. 2. Long creepage distance for surface mount type. U nit mm

Cosmo Electronics Corp. Document No. 9P46001 http://www.cosmo ic.com cosmo K TLP 503 Series PIN ZERO CROSS TRIAC DRIVER PHOTOCOUPLER SMD Carrier T ape & Reel 10.35 2.00 4.00 1.75 7.50 12.00 0.35 4.90 10.35 16.0±0.30 Direction of feed from reel TL Direction of feed from reel TR unit mm 1.5 16.4 2.0 TOLERANCE ±0.2mm

Cosmo Electronics Corp. Document No. 9P46001 http://www.cosmo ic.com cosmo K TLP 503 Series PIN ZERO CROSS TRIAC DRIVER PHOTOCOUPLER L Carrier tape & Reel TLD Direction of feed from reel 24.40 30.40 Max. 100±0.50 13.0 330 Max. Unit:mm TOLERANCE ±0.2mm TRU Direction of feed from reel 24.00±0.30 11.50 1.75 2.00 4.00 10.15 12.00 12.35 3.80 4.30 0.30

1.50 MIN

Cosmo Electronics Corp. Document No. 9P46001 http://www.cosmo ic.com cosmo K TLP 503 Series PIN ZERO CROSS TRIAC DRIVER PHOTOCOUPLER A pplication Notice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratin gs listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal c omputer b. OA m achine c. Audio / Video d. Instrumentation e. Electrical a pplication f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfu nction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control e. Equipment used for automotive vehicles, trains, ships...etc. This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any wri tten permission expressed f r o m cosmo.