KTLP260J_15 COSMO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

600V peak blocking voltage Subminiature type (The volume is smaller than that of our conventional DIP type by as far as 30%) Simplifies log ic control of 115/240 VAC power Non zero voltage crossing Isolation voltage between input a nd output (Viso 3750Vms) MSL class 1 Agency Approvals UL Approved (No. E169586): UL1577 C UL Approved (No. E169586) VDE Approved (No. 40009235 ): DIN EN60747 CQC Approved: GB8898 2011, GB4943.1 2011 Application s Solenoid/Valve c ontrols Lighting c on trols Static power s witches AC motor d rives Temperature c ontrols E.M c ontactors AC motor c ontactors Solid state r elay Programmable controllers

Cosmo Electronics Corp. Document No. 9P43004 http://www.cosmo ic.com cosmo K TLP260J Series PIN MINI FLAT RANDOM PHASE TRIAC DRIVER PHOTOCOUPLER Outside Dimension Unit mm TOLERANCE : ±0.2mm Device Marking COSMO 260J YWW Notes cosmo J YWW Y Year code / W Week code 2.54 4.40 0.40 0.50 7.00 0.5 0.4 0.10 0.10 3.90 0.5 2.0 0.5

Cosmo Electronics Corp. Document No. 9P43004 http://www.cosmo ic.com cosmo K TLP260J Series PIN MINI FLAT RANDOM PHASE TRIAC DRIVER PHOTOCOUPLER Absolute Maximum Ratings (Ta=25 Parameter Symbol Rating Unit Input Forward current I F mA Peak forward current I FM A Reverse voltage V R V Power dissipation P D mW Output Off state output t erminal voltage V DRM V PEAK On s tate R.M.S. c urrent I T(RMS) mA Peak r epetitive surge c urrent (PW=10ms.DC 10%) I TSM A Power dissipation P D mW Total power dissipation P tot mW Isolation voltage 1 minute V iso 375 Vrms Operating temperature T opr 40 to + 115 Storage temperature T stg 50 to +125 Soldering temperature 10 second s T sol 260 Electro optical Characteristics (Ta=25 Parameter Symbol Conditions M in T yp M ax Unit Input Forward voltage V F I F =10mA 1.2 V Reverse current I R V R =4V μ A Output Peak b locking c urrent I DRM V DRM R a ted μ A O n s tate v oltage V TM I TM 0mA V Tran s fer charac teristics Holding c urrent I H 0.1 mA Critical rate of rise of off state voltage d v /dt V DRM =(1 )*Rated μ s Isolation resistance R iso DC500V 5x10 Ω Minimum trigger current I FT Main t erminal v oltage=3V mA Turn on time T on V D , R L =100 Ω I F =20mA 100 μ s Static dv/dt Test Circuit R=10KΩ X100 SCOPE PROBE D.U.T CTEST Vdc RTEST MERCURY WETTED RELAY PULSE INPUT APPLIED VOLTAGE WAVEFORM

0 VOLTS

dv/dt =

0.63 Vmax

τRC τRC

Cosmo Electronics Corp. Document No. 9P43004 http://www.cosmo ic.com cosmo K TLP260J Series PIN MINI FLAT RANDOM PHASE TRIAC DRIVER PHOTOCOUPLER Fig.1 Forward C urrent e Fig.2 Diode Power Dissipation vs. Ambient T emperatur e vs Ambient T emperature Forward Current I F ( mA ) -4 0 -20 4 0 6 0 8 0 1 00 11 5 1 0 2 0 3 0 4 0 5 0 6 0 Diode Power Dissipation P D (mW) -40 -20 100 115 100 120 Ambient Temperature Ta ( Am bient Temperature Ta ( Fig.3 On s tate R.M.S. C urrent Fig.4 Total Power Dissipation vs. Ambient T emperature vs. Ambient Temperature On state Current I TM ( mA ) -40 -20 100 115 100 120 Total Power Dissipation P D (mW) -40 -20 100 115 100 150 200 250 300 Ambient Temperature Ta ( Ambient Temperature Ta ( Fig.5 Peak Forward Current Fig.6 Forward Current vs. Duty Ratio vs. Forward Voltage Peak Forward Current I FT ( mA ) 100 1000 10000 Pulse width <= 100us Ta=25°C Forward Current I F ( mA ) 100 1000 0.5 1.0 1.5 2.0 2.5 3.0 500 200 Ta=75°C 50°C 25°C 0°C -25°C Duty Ratio Forward Voltage (V)

Cosmo Electronics Corp. Document No. 9P43004 http://www.cosmo ic.com cosmo K TLP260J Series PIN MINI FLAT RANDOM PHASE TRIAC DRIVER PHOTOCOUPLER Fig.7 On s tate C haracteristics Fig.8 Leakage with LED off vs. Ambient Temperature On state Current I TM ( mA ) -400 -300 -200 -100 +100 +200 +300 +400 Output pulse width 80us IF=30mA, f=60Hz, Ta=25°C Peak Blocking Current ( nA ) -40 -20 100 115 100 1000 On state Voltage (V) Ambient Temperature Ta ( Fig. Trigger Current v s Ambient Temperature I FT , Normalized -40 -20 100 115 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Normalized to Ta=25°C Ambient Temperature Ta (

Cosmo Electronics Corp. Document No. 9P43004 http://www.cosmo ic.com cosmo K TLP260J Series PIN MINI FLAT RANDOM PHASE TRIAC DRIVER PHOTOCOUPLER Recommended Soldering Conditions (a) Infrared reflow soldering Peak reflow soldering Time of peak reflow tem perature Time of temperature higher than 230 Time to preheat t emperature from 180~190 Time(s) of reflow Flux or below (package surface temperature) 10 sec 60 sec 120 sec Two Rosin flux containing small amount of chlorine (The f lux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 6 0 -1 2 0 se c 3 0 -6 0 s e c t (s) temperature 1 0 se c M a x. (b) Wave soldering Temperature Time Preheating conditions T ime s ) of reflow Flux 260 or below (molten solder temperature) 10 seconds or less 120 or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions Fluxes Avoid removing the residual flux with f reon based and chlorine based cleaning solvent Avoid shorting between portion of frame and leads.

Cosmo Electronics Corp. Document No. 9P43004 http://www.cosmo ic.com cosmo K TLP260J Series PIN MINI FLAT RANDOM PHASE TRIAC DRIVER PHOTOCOUPLER Number ing System K TLP J X Note s K TLP J = Part No. X = Tape and r eel option ( TLD TRU Option

Description

e mount type package + TLD tape & reel option 3000 units per reel TRU surface mount type package + TRU tape & reel option 3000 units per reel Recommended Pad Layout for Surface Mount Lead F orm 1.50 2.54 7.85 0.80 U nit mm

Cosmo Electronics Corp. Document No. 9P43004 http://www.cosmo ic.com cosmo K TLP260J Series PIN MINI FLAT RANDOM PHASE TRIAC DRIVER PHOTOCOUPLER pin Mini F lat TLD/TRU Carrier T ape & Reel 1.75 7.5 4.10 2.00 4.00 7.50 0.31 2.55 TLD TRU Direction of feed from reel Direction of feed from reel Unit mm TOLERANCE ±0.2mm 1.5±0.5 2.00 16.4 8.00 16.0

Cosmo Electronics Corp. Document No. 9P43004 http://www.cosmo ic.com cosmo K TLP260J Series PIN MINI FLAT RANDOM PHASE TRIAC DRIVER PHOTOCOUPLER Application Notice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general el ectronics application list below: a. Personal c omputer b. OA machine c. Audio / Video d. Instrumentation e. Electrical a pplication f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equip ment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equi pment (trunk lines) d. Nuclear power control This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mec hanically for any purpose, in whole or in part without any written permission expressed f r o m cosmo.