KTLP250TL

KTLP250_15 COSMO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Features

This unit is 8.lead DIP package. Input threshold current: I F =5mA (max.) Supply current ( I cc ): 11mA (max.) Supply voltage ( V cc ): 10 35V Output c urrent (IO): ±1.5A (max.) Switching time (tpLH/tpHL): 0.5µs (max.) Isolation voltage: 00Vrms ax MSL class 1 Agency Approvals

• UL Approved (No. E169586): UL1577 c UL Approved (No. E169586) VDE Approved (No. 40020973): DIN EN60747 Application s Transistor i nverter Inverter For a ir c ondition e r IGBT g ate d rive Power MOS FET g ate d rive Truth Table The use of a 0.1μF bypass capacitor must be connected between pins 8 and 5 is recommended. LED OUTPUT ON HIGH LEVEL ON OFF OFF LOW LEVEL OFF ON

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Outside Dimension Unit mm Device Marking Notes: cosmo YWW Year c ode / WW: Week c ode cosmo Y W W 13.00 13.00 0.26 6.50 7.62 1.20 3.00 0.4 3.50 0.5 2.54 9.68 2.70 0.3 1.20 0.5 3.00 3.50 2.54 2.54 2.54 2.70 9.68 10.00 1.00 0.78 7.62 6.50 2.54 2.54 2.54 3.50 1.20 0.25 9.68 10° 6.50 7.62 10.16 0.90 ± 0.25 0.90 ± 0.25 11.80 0.25 +0.2 -0.5 TOLERANCE ±0.2mm 2.54 2.54 2.54 3.50 1.20 0.25 9.68 1.Dual-in-line type KTLP250 2.Surface mount type KTLP250S 3.Long creepage distance type KTLP250H 4.Long creepage distance for surface mount type KTLP250L

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Absolute Maximum Ratings (Ta = 25°C) Parameter Symbol Rating Unit Input Forward c urrent I F mA Forward c urrent d erating (Ta ΔI F / ΔTa 0.36 m A Peak t ransient f orward c urrent (*Note 1) I F PT A Reverse v oltage V R V Junction t emperature Tj 125 Output “H” p eak o utput c urrent(Pw 2.5µs,f 15kHz) (*Note 2) I OPH 1.5 A “L” p eak o utput c urrent(Pw 2.5µs,f 15kHz) (*Note 2) I OPL +1.5 A Output v oltage (Ta V O V T a Supply v oltage (Ta V CC V T a Output v oltage d erating (Ta ΔV O / ΔTa 0.73 V Supply v oltage d erating (Ta ΔV CC /ΔTa 0.73 V Junction t emperature Tj 125 Operating f requency (*Note 3) f KhZ Operating t emperature r ange Topr Storage t emperature r ange Tstg 55~125 Lead s oldering t emperature(10s) (*Note 4) Tsol 260 Isolation v oltage (AC,1min.,R.H 60%) (*Note 5) BVs Vrms *Note1:Pulse wi dth Pw μ s,300pps. *Note2: Expo n ential waveform. *Note3: Expon ential waveform, I OPH 1.0A ( 2.5 μ s),I OPL +1.0A ( 2.5 μ s). *Note4: It is 2 mm or more from a lead root. *Note5: Device is considered as a two terminal device: Pin1,2,3 and 4 shorted together, and pins 5,6,7 and 8 shorted together.

Electrical Characteristics

(Ta = 25 Parameter Symbol Test Circuit Test Condition Min. Typ. Max. Unit Input forward voltage V F I F m A T a 1.6 1.8 V Temperatu re coefficient of forward voltage V F Ta I F =10mA 2.0 m V Input reverse current I R V R V T a μA Input capacitance C T V f M H z T a 250 pF Output current “H” level I OPH V CC =30V (*A) I F =10mA Vb=4V 0.5 1.5 A

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER “L” level I OPL I F Va=2.5V 0.5 Output voltage “H” level V OH V CC 1=15V,V EE1 15V R L =200Ω,I F =5mA 12.8 V “L” level V OL V CC1 =15V,V EE1 15V R L =200Ω,V F =0.8V 14.2 12.5 Supply current “H” level I CCH V CC =30V,I F =10mA, T a mA V CC =30V F =10mA “L” level I CCL V CC =30V,I F =0mA, T a 7.5 V CC =30V,I F =0mA Threshold input current “Output L→H” I FLH V CC1 =15V,V EE1 15V, R L =200Ω,V O >0V 1.2 mA Threshold input voltage “Output H→L” V FHL V CC1 =15V,V EE1 15V R L =200Ω,V O <0V 0.8 V Supply voltage V CC V Capacitance (input output) C S V s f M H z T a 1.0 2.0 pF Resistance (input output ) R S V s V T a R.H. 1*10 Ω A l l t y p i c a l v a l u e s a r e a t T a A D u r a t ion of I O time 50μs Switching Characteristics (Ta = 25 Parameter Symbol Test Circuit Test Condition Min. Typ. Max. Unit Propagation delay time “L→H” t pLH I F =8mA (Note8) V CC1 =+15V,V EE1 15V Rg=20Ω,Cg=10nF 0.15 0.5 μs “H→L” t pHL 0.15 0.5 Output rise time t r Output fall time t f Common mode transient immunity at high level output C MH V CM =600V,I F =8mA V CC V T a KV / μs Common mode transient immunity at low level out put C ML V CM =600V,I F V CC V T a KV / μs A l l t y p i c a l v a l u e s a r e a t T a *Note 8: Input signal rise time (fall time) < 0.5μs.

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Fig.1 Forward Current vs. Forward Voltage Fig.2 Forward Voltage Temperature Coefficient V F / Ta vs. Forward Curre nt Forward C urrent I F (mA) 0.01 0.8 1.0 1.4 1.2 1.6 0.03 0.05 0.3 0.5 0.1 100 1.8 2.0 Forward Voltage Temperature Coefficient V F / Ta (mV/ -1.4 0.1 0.3 0.5 -1.8 -1.6 -2.2 -2.0 -2.6 -2.4 Forward Voltage V F (V) Forward Current I F (mA) Fig.3 Allowable Peak Output Current vs. Ambient Temperature Fig.4 Allowable Forward Current vs. Ambient Temperature Allowable Peak Output Current I OPH , I OPL (A) PW 2.5 μ s f 15KHz 100 -40 120 Allowable Forward Current I F (mA) -40 100 120 Ambient Temperature Ta ( Am bient Temperature Ta ( Fig.5 Supply Voltage vs. Ambient Temperature Supply Voltage Vcc (V) -40 VCC - Ta 100 120 Ambient Temperature Ta (

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Test Circuit Top View I OPL Measure I OPH Measure V O H Measure V O L Measure

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER tp LH, tp HL, t t Measure 100Ω I F 104PF R g V O V EE1 V CC1 c g       V O I F       V OH 80% V OL 80% GND C MH, C ML, Measure V O V CC V CM SW A B 104PF SW:B(IF=0) SW:A(IF=8mA) 90%   10% V CM   26V C ML C MH 600V 480(V) t r ( μ C ML 480(V) t f ( μ C MH ML MH ) is the maximum rate of rise (fall) of the common mode voltage that can be sustained with the output voltage in the low (high) state.

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Recommended Soldering Conditions (a) Infrared reflow soldering Peak reflow soldering Time o f peak reflow temperature Time of temperature higher than 230 Time to preheat t emperature from 180~190 Time(s) of reflow Flux or below (package surface temperature) 10 sec 60 sec 120 sec Two Rosin flux containing small amount of chlori ne (The f lux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 6 0 -1 2 0 se c 3 0 -6 0 s e c t (s) temperature 1 0 se c M a x. (b) Wave soldering Temperature Time Preheating conditions T ime s ) of reflow Flux 260 or belo w (molten solder temperature) 10 seconds or less 120 or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions Fluxes Avoid removing the r esidual flux with f reon based and chlorine based cleaning solvent Avoid shorting between portion of frame and leads.

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Numbering System K TLP2 X Y Note K P1510 = Part No. X Lead f orm option blank S H L ) Y Tape and r eel option ( TL TR TLD TRU Option

Description

S (TL surface mount type package + TL tape & reel option 000 u n its per reel S (TR surface mount type package + TR tape & reel option 000 u n its per reel L (TLD long creepage distance for surface mount type package T LD tape & reel option 00 u n its per reel L (TRU) long creepage distance for surface mount type package TRU tape & reel option 00 u n its per reel Recommended P ad L ayout for S urface M ount L ead F orm 2.54 2.54 1.5 1.9 2.54 2.54 1.5 1.9 8-pin SMD 8-pin L 8.3 2.54 10.7 2.54 1.Surface mount type 2.Long creepage distance for surface mount type U nit : mm

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER pin SMD Carrier T ape & Reel Direction of feed from reel TL Direction of feed from reel TR unit mm Quantity 1000 pcs/reel

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER pin L Carrier T ape & Reel 12.35±0.10 11.50±0.10 24.00±0.30 12.00±0.10 4.00±0.10 2.00±0.10 1.75±0.10 TLD Direction of feed from reel 24.40 30.40 Max. +0.20 -0.00 100±0.50 13.0±0.20 330 Max. Quantity 800 pcs/reel Unit:mm TOLERANCE ±0.2mm TRU Direction of feed from reel

Cosmo Electronics Corp. Document No. 9P5 1007 http://www.cosmo ic.com cosmo KTLP Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Application N otice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of product s without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use o f the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal c omputer b. OA machine c. Audio / Video d. Instrumentation e. Electrical a pplication f. Measurement equipment g. Consumer electr onics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical a nd other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control This publication is the property of cosmo. No part of this publ ication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expres sed f r o m cosmo.