KTD251B335M90 CHEMI-CON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS ˗RATINGS -55 to +125ˆ1. Category Temperature Range 25, 50, 100, 250 Vdc2. Rated Voltage Range 0.1 to 470F3. Rated Capacitance Range M(ʶ20%)4. Rated Capacitance Tolerance 5. Temperature Characteristics 6. Rated Ripple Current X7R See No.5 on the following table ˗SPECIFICATIONS Between Terminals 250% of rated voltage shall be applied for 5 seconds.No abnormality. dc products : 475V)(Only 250Vdc products : 475V) Withstand Voltage Terminals to Coating Resin 3 Rated Capacitance Within specified tolerance.
2 Insulation Resistance 100/C
R(MЊ) or 4000(MЊ) whichever is less. Rated voltage shall be applied for 60ʶ5 seconds at temperature 25ʶ2ˆ. Test ConditionSpecificationItemsNo. 4 Dissipation Factor 5.0% maximum. Temperature Frequency Voltage 1ʶ0.1kHz 1ʶ0.2Vrms 25ʶ2ˆ 120ʶ12Hz 0.5ʶ0.2Vrms C Rʽ10F CR>10F ˗FEATURES 1. Small in size and wide capacitance range. Max. 470F is available. 2. Temperature characteristic is X7R in EIA code. 3. Superior humidity characteristic and long life. 4. Excellent high frequency characteristic due to low ESR. 5. High rated ripple current. 6. 250Vdc items are available. 7. Resin(UL94 V-0) used for coating. 8. Pb-free design(also ceramic dielectric) ˗APPLICATIONS 1. Smoothing circuit of switching mode AC-DC or DC-DC converter. 2. Noise suppressor for various kinds of equipments. 3. By-pass or decoupling circuits. 4. Automotive equipments. ˗CONSTRUCTION Coating Resin Ceramic Dielectric Termination Solder (Pb-free) Internal Electrode Lead Wire RoHS Compliant/5%4FSJFT As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for Multilayer ceramic capacitors. Please contact us for more information. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 23 CAT. No. E1002V
DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS ˗SPECIFICATIONS
10 Temperature Cycle
For 5 cycles for above temperature cycle.
11 Humidity Load Life
12 Endurance
Appearance : No abnormality. ϶C/C :ʶ20% D.F. : 10% maximum I.R. : 25/CR(MЊ) or 1000(MЊ) whichever is less. Appearance : No abnormality. ϶C/C :ʶ15% D.F. : To meet the initial specification. I.R. : To meet the initial specification. Appearance : No abnormality. ϶C/C :ʶ20% D.F. : 10% maximum I.R. : 50/CR(MЊ) or 1000(MЊ) whichever is less. Temperature : 40ʶ2ˆ Humidity : 90 to 95%RH Voltage : Rated voltage Time : 500ʶ hours Temperature : 125ʶ3ˆ Voltage : Rated voltage Time : 1000ʶ hours Step Temperature (ˆ) Min. Category temperature ʶ3 Room temperature (min.) 30ʶ3 3 max. Max. Category temperature ʶ3 Room temperature 30ʶ3 3 max. *CR : Rated Capacitance(µF)
5 Rated Ripple Current 10kHz to 1MHz (sine curve)
Ripple voltage Vp shall be less than the rated voltage. Test ConditionSpecificationItemsNo.
8 Solderability
shall be covered with new solder. Solder Temperature : 350ʶ10ˆResistance to Soldering Heat9 Dipping Time : 3ʶ0.5 sec. Depth : 1.5 to 2mm Tension Bending Robustness of Terminations Vibration No visible damage. Appearance : No abnormality. Capacitance : To meet the initial specification. D.F. : To meet the initial specification. Time : 2times. The force applied shall be : Amplitude : 1.5mm Frequency range : 10-55-10Hz (1 min) Direction and time : 2 hours each to X, Y, Z axis. Total 6 hours. LeadП (mm) 0.5 max. Tensile(N) (sec.) 10ʶ1 0.6 min. 10 10ʶ1 LeadП (mm) 0.5 max. Bending(N) 2.5 (kg) 0.25 0.6 min. 5 0.51 Solder Solder Temperature Dipping Time Pb Free 245ʶ5ˆ 2ʶ0.5sec. /5%4FSJFT Please refer to" Part Numbering System" of the beginning of a catalog for the details. ˗DIMENSIONS Crimped lead 32 to 76 Size Straight lead For all size L F W15min. T d L F W15min. T d ˗PART NUMBERING SYSTEM Supplement code Taping code Terminal code Size code Capacitance tolerance code Nominal Capacitance code Temperature characteristics code Rated voltage code Series code Category K T D 5 0 0 B 1 0 6 M 5 5 0 T 0 0A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Min. 75% of surface of the termination Size code 0.3 0.8 1.0 8076 2.0 3.0 4.01.5Arms Appearance : No abnormality. ϶C/C :ʶ15% D.F. : To meet the initial specification. I.R. : To meet the initial specification. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 24 CAT. No. E1002V
DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS ˗STANDARD RATINGS Rated voltage (Vdc) Part Number KTD250B335M32A0T00 KTD250B475M32A0T00 KTD250B685M43A0T00 KTD250B106M43A0T00 KTD250B156M43A0T00 KTD250B156M55A0T00 KTD250B226M55A0T00 KTD250B336M55A0T00 KTD250B476M76A0T00 KTD250B686M80A0B00 KTD250B107M80A0B00 KTD250B157M90A0B00 KTD250B227M90A0B00 KTD250B337M99A0B00 KTD250B477M99A0B00 KTD500B105M32A0T00 KTD500B155M32A0T00 KTD500B225M32A0T00 KTD500B335M32A0T00 KTD500B475M43A0T00 KTD500B685M43A0T00 KTD500B106M55A0T00 KTD500B156M55A0T00 KTD500B226M76A0T00 KTD500B336M80A0B00 KTD500B476M90A0B00 KTD500B686M90A0B00 KTD500B107M90A0B00 KTD500B157M99A0B00 KTD500B227M99A0B00 KTD101B334M32A0T00 KTD101B474M32A0T00 KTD101B684M32A0T00 KTD101B105M32A0T00 KTD101B155M32A0T00 KTD101B225M32A0T00 KTD101B155M43A0T00 KTD101B225M43A0T00 KTD101B335M43A0T00 KTD101B475M43A0T00 KTD101B335M55A0T00 KTD101B475M55A0T00 KTD101B685M55A0T00 KTD101B685M76A0T00 KTD101B106M80A0B00 KTD101B156M80A0B00 KTD101B226M90A0B00 KTD101B336M90A0B00 KTD101B476M99A0B00 KTD101B686M99A0B00 KTD101B107M99A0B00 KTD251B104M32A0T00 KTD251B154M32A0T00 KTD251B224M32A0T00 KTD251B334M32A0T00 KTD251B474M43A0T00 KTD251B684M43A0T00 KTD251B105M55A0T00 KTD251B155M55A0T00 KTD251B225M76A0T00 KTD251B225M80A0B00 KTD251B335M90A0B00 KTD251B475M90A0B00 KTD251B685M99A0B00 KTD251B106M99A0B00 KTD251B156M99A0B00 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 1,000 ʵ ʵ ʵ ʵ ʵ ʵ 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 1,500 ʵ ʵ ʵ ʵ ʵ ʵ 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 1,500 ʵ ʵ ʵ ʵ ʵ ʵ ʵ 2,000 2,000 2,000 2,000 2,000 2,000 2,000 2,000 1,000 ʵ ʵ ʵ ʵ ʵ ʵ 100 250 Maximum ripple current (Arms) Taping Quantity per reel (pcs. / box) 0.3 0.8 1.0 0.3 0.8 1.0 0.3 0.8 1.0 0.3 0.8 1.0 Rated Capacitance (F) 3.3 4.7 6.8 100 150 220 330 470 1.0 1.5 2.2 3.3 4.7 6.8 100 150 220 0.33 0.47 0.68 1.0 1.5 2.2 1.5 2.2 3.3 4.7 3.3 4.7 6.8 6.8 100 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 2.2 3.3 4.7 6.8 Dimensions (mm) Lmax. 5.0 6.5 7.5 5.0 6.5 7.5 5.0 6.5 7.5 5.0 6.5 7.5 Wmax. 6.0 6.5 9.0 6.0 6.5 9.0 6.0 6.5 9.0 6.0 6.5 9.0 Tmax. 3.5 4.0 4.5 3.5 4.0 4.5 3.5 4.0 4.5 4.7 3.5 4.0 4.5 Fʶ0.8 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Пdʶ0.05 0.5 0.5 0.5 6.0 2.013.5 15.0 22.5 20.0 28.5 20.0 8.0 6.0 8.0 8.0 11.5 10.0 0.6 3.020.0 0.8 4.025.0 0.8 2.013.5 15.0 22.5 20.0 28.5 20.0 5.5 10.0 0.6 6.0 3.020.0 0.8 7.0 2.013.5 15.0 22.5 20.0 28.5 20.0 5.0 10.0 0.6 3.020.0 0.8 4.025.0 0.8 6.0 6.0 7.5 9.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 /5%4FSJFT ˞Please consult with us when you consider the rating other than a standard table. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 25 CAT. No. E1002V