KT8W-P111C SICK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

A B C D E F H I J K L M N O P Q R S T KT8W-P111C | KT8 CONTRAST SENSORS

Ordering information

Type Part no. KT8W-P111C 1027919 Other models and accessories www.sick.com/KT8 Detailed technical data

Features

Dimensions (W x H x D) 30.4 mm x 53 mm x 80 mm Sensing distance 10 mm 1) Sensing distance tolerance ± 3 mm Housing design (light emission) Rectangular Light source LED, RGB 2) Wave length 640 nm, 525 nm, 470 nm Light emission Long and short side of housing, exchangeable Light spot size 0.8 mm x 4 mm Light spot direction Vertical 3) Adjustment Teach-in button Teach-in mode Static 2-point teach-in Dynamic teach-in (min/max) Function Automatic drift correction, Deactivation delay, 10 ms / 20 ms / 40 ms, adjustable, CAN inter- face 1) From front edge of lens. 2) Average service life: 100,000 h at TU = +25 °C. 3) In relation to long side of housing. Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 5 Vpp 2) Power consumption < 120 mA 3) 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) Reference voltage DC 32 V.

2 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24

Subject to change without notice

KT8W-P111C | KT8 CONTRAST SENSORS Switching frequency 22.5 kHz 4) Response time 22 µs 5) Jitter < 11 µs Switching output PNP Switching output (voltage) PNP: HIGH = VS– ≤ 2 V / LOW approx. 0 V Output current Imax. 100 mA Input, teach-in (ET) PNP Teach: U = 10 V ... < UV Run: U < 2 V Retention time (ET) 25 ms, non-volatile memory Connection type Male connector M12, 8-pin Protection class II 6) Circuit protection UV connections, reverse polarity protected Output Q short-circuit protected Interference pulse suppression Enclosure rating IP67 Weight 400 g Housing material Zinc diecast 1) Limit values when operated in short-circuit protected network: max. 8 A. 2) May not exceed or fall below Uv tolerances. 3) Without load. 4) With light/dark ratio 1:1. 5) Signal transit time with resistive load. 6) Reference voltage DC 32 V. Ambient data Ambient operating temperature –10 °C ... +55 °C Ambient storage temperature –10 °C ... +75 °C Shock load According to IEC 60068 UL File No. NRKH.E181493 & NRKH7.E181493 Classifications ECl@ss 5.0 27270906 ECl@ss 5.1.4 27270906 ECl@ss 6.0 27270906 ECl@ss 6.2 27270906 ECl@ss 7.0 27270906 ECl@ss 8.0 27270906 ECl@ss 8.1 27270906 ECl@ss 9.0 27270906 ETIM 5.0 EC001820 ETIM 6.0 EC001820 UNSPSC 16.0901 39121528 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 3

A B C D E F H I J K L M N O P Q R S T KT8W-P111C | KT8 CONTRAST SENSORS Dimensional drawing (Dimensions in mm (inch)) KT8 CAN 9 (0.35) 28 (1.10) 56 (2.20) (0.83) 30.4 (1.20) (0.67) (0.51) 28 (1.10) 52 (2.05) 80 (3.15) 25 (0.98) 40 (1.57) 53 (2.09) (0.12) 2 1 2.5 (0.10) Ø 25.5 (1.00) Sensing distance 10 mm (0.39 inch) 4.5 (0.18) Ø 25.6 (1.00) Sensing distance 20 mm (0.79 inch) ① Lens (light transmission), can be exchanged for pos. 4 ② M5 threaded mounting hole, 5.5 mm deep ③ See dimensional drawings of lenses ④ Blind screw can be replaced by pos. 1 ⑤ Connector M12 (rotatable up to 90°) Adjustments KT8 CAN SET – + Q Timer Rx D Tx D ① Function signal indicators (yellow) ② Bar graph (green) ③ Teach-in pushbutton / +/– pushbutton

4 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24

Subject to change without notice

KT8W-P111C | KT8 CONTRAST SENSORS Connection diagram cd-328 +(L+) -(M) ET CAN LOW in BN BU 1WH 5GY Q8RD CAN LOW out 3GN CAN HIGH in 6PK CAN HIGH out 4YE Concept of operation KT8 CAN, Teach-in dynamic Press and hold SET button. Emitted light turns white. 1. Position background Hold down SET button. 2. Move at least one repeat length using the light spot Release SET button. SET – + Q Bank Timer SET – + Q Bank Timer SET – + Q Bank Timer KT8 CAN, Teach-in static Press and hold SET button > 1 s. Yellow LED flashes. 1. Position mark Press and hold SET button > 1 s. Yellow LED goes out. 2. Position background Note The bar display visualizes the detection reliability during teach-in. The more LEDs that illuminate, the better the teach-in:

1 LED illuminates = operation not reliable – contrast difference too low

≤ 4 LEDs illuminate = operation OK – sufficient contrast difference > 4 LEDs illuminate = reliable operation – high contrast difference Switching characteristics Standard setting via control panel or CAN, Device configuration only possible via CAN, cf. operating instructions. Internal signal received Dark switching Light switching Output Q Output Q Switching threshold Switching threshold Internal signal received Example SET – + Q Bank Timer SET – + Q Bank Timer 2018-07-08 09:57:24 | Online data sheet Subject to change without notice REGISTRATION SENSORS | SICK 5

A B C D E F H I J K L M N O P Q R S T KT8W-P111C | KT8 CONTRAST SENSORS Characteristic curve KT8 CAN, KT10-2 (0.43) 0 12 (0.47) 12.5 (0.49) (0.51) (0.55) (0.59) 100Relative sensitivity in % Sensing distance in mm (inch) Recommended accessories Other models and accessories www.sick.com/KT8 Brief description Type Part no. Universal bar clamp systems Plate G for universal clamp bracket, steel, zinc coated, Universal clamp (2022726), mounting hardware BEF-KHS-G01 2022464 Plate K for universal clamp bracket, steel, zinc coated, Universal clamp (2022726), mounting hardware BEF-KHS-K01 2022718 Universal clamp bracket for rod mounting, steel, zinc coated, without mounting hard- ware BEF-KHS-KH1 2022726 Mounting bar, straight, 200 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-A 4056054 Mounting bar, straight, 300 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12G-B 4056055 Mounting bar, L-shaped, 150 mm x 150 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-A 4056052 Mounting bar, L-shaped, 250 x 250 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-B 4056053 Plug connectors and cables Head A: female connector, M12, 8-pin, angled Head B: Flying leads Cable: PUR, halogen-free, shielded, 2 m DOL-1208- W02MAS01 6029224

6 REGISTRATION SENSORS | SICK Online data sheet | 2018-07-08 09:57:24

Subject to change without notice

SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com