KSWA-2-46 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Maximum Ratings Features

  • PCN
  • cellular
  • 2-way radio
  • receiver antenna switching
  • wideband, DC to 4.6 GHz
  • low insertion loss, 1.3 dB typ.
  • hermetically sealed
  • aqueous washable

Applications

CASE STYLE: XX112 KSWA-2-46+ Electrical Specifications FREQ.4 (GHz) INSERTION LOSS (dB) 1dB COMPR. (dBm) IN-OUT ISOLATION (dB) DC-200 MHz 200-1000 MHz 1000-3000 MHz 3000-4600 MHz DC-200 MHz 200-1000 MHz 1000-4600 MHz DC-200 MHz 200-1000 MHz 1000-4600 MHz Pin Connections RF IN 2 RF OUT 1 5 RF OUT 2 8 CONTROL 1 3 CONTROL 2 1 GROUND 4,6,7 Additional Specifications Control Voltage, volts Low State -0.2 to 0 High State (negative) for compression specs -8 for other specs -5 to -8 Control Current, mA 2.5 typ. at -8V VSWR(:1) 1.3 typ. Rise/Fall time (10%-90%), ns Switching time, 50% of Control to 90% RF(Turn-on), ns 10% RF(Turn-off), ns 2 typ. 4 typ. 2.5 typ. Video Leakage, mVp-p 0/-5V Control 30 typ. MTBF , hrs @ 100°C case 11X106 1. Max. Input RF power, +27 dBm except below 500 MHz +24 dBm 2. Control voltage (-10V) maximum. 3. Video leakage or break through is defined as leakage of switching signal to RF output ports. 4. All RF connections must be DC blocked or held at 0V DC. CONTROL LOGIC Control Ports RF outputs 1 2 1 2 -V 0 On Off 0 -V Off On Outline Dimensions ( )inch mm Outline Drawing PC B L and Patter n Suggested L ayout, T olerance to be within ±.002 Demo Board MCL P/N: TB-204 Suggested PCB Layout (PL-217) 50W SPDT, Absorptive DC4 to 4.6 GHz Switch Surface Mount REV. D M151107 KSWA-2-46+ WP/CP/AM 150818 Page 1 of 2 Operating Temperature -55°C to 100°C Storage Temperature -55°C to 150°C Input Power see Note 1 Control V see Note 2 Electrical Schematic A BCD E FGH J K M N P Q R S wt. Permanent damage may occur if any of these limits are exceeded. +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits KSWA-2-46+ INSERTION LOSS 0.0 0.4 0.8 1.2 1.6 2.0 0 920 1840 2760 3680 4600 FREQUENCY (MHz) INSERTION LOSS (dB) at RF level of 10 dBm KSWA-2-46+ ISOLATION 100 0 920 1840 2760 3680 4600 FREQUENCY (MHz) ISOLATION (dB) at RF level of 10 dBm KSWA-2-46+ VSWR 1.0 1.2 1.4 1.6 1.8 2.0 2.2 0 920 1840 2760 3680 4600 FREQUENCY (MHz) VSWR INPUT OUT-ON OUT-OFF at RF level of 10 dBm FREQ. (MHz) ON INSERTION LOSS (dB) Control @ 0V/-5V IN-OUT OFF ISOLATION (dB) Control @ 0V/-5V IN-OUT VSWR IN OUT x σ x σ x ON x OFF x 3.00 5.00 10.00 20.00 50.00 100.00 200.00 500.00 911.55 1000.00 1581.00 2107.00 2370.00 2489.55 2752.55 3278.55 3804.55 4330.55 4474.00 4600.00 0.55 0.55 0.55 0.63 0.62 0.67 0.72 0.80 0.90 0.90 1.01 1.10 1.15 1.26 1.32 1.26 1.63 1.52 1.47 1.98 0.01 0.02 0.02 0.04 0.02 0.02 0.02 0.02 0.02 0.03 0.04 0.03 0.05 0.06 0.07 0.04 0.09 0.06 0.09 0.06 82.53 85.42 84.71 74.57 64.87 58.56 54.29 51.52 48.87 48.56 44.26 39.70 37.89 37.25 35.59 31.74 28.75 25.75 25.51 25.42 2.67 4.39 7.84 2.52 0.76 0.45 0.36 0.42 1.18 1.23 1.63 1.28 1.12 0.97 0.62 1.06 0.72 0.41 0.36 0.32 1.12 1.12 1.13 1.13 1.12 1.12 1.12 1.13 1.16 1.17 1.20 1.30 1.31 1.32 1.41 1.44 1.39 1.49 1.57 1.55 1.12 1.12 1.13 1.12 1.12 1.12 1.11 1.12 1.11 1.10 1.04 1.09 1.11 1.14 1.22 1.35 1.41 1.78 1.94 1.87 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.02 1.04 1.05 1.11 1.14 1.15 1.17 1.23 1.29 1.38 1.65 1.73 1.67 Typical Performance Data KSWA-2-46+ Page 2 of 2