DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20200717 (1/4) beads_automotive_power_kpz1608-hr_en.fm EMC Components Chip beads For power line Soft termination KPZ-HR series (for automotive) KPZ1608-HR type
FEATURES
Noise reduction solution for power line. Compared to the KMZ series, has low direct current resistance for compatibility with large currents, optimal for low power consumption. The conductive resin absorbs external stresses and improves resistance to mechanical stress and thermal shock. The conductive resin provides thermal stress relief and can withstand temperatures as high as 150°C. Operating temperature range: –55 to +150°C Compliant with AEC-Q200 APPLICATION Various ECUs, powertrains, body controls, and car multimedia (telematics). PART NUMBER CONSTRUCTION CHARACTERISTICS SPECIFICATION TABLE Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 85°C or more in temperature of the product. Measurement equipment ˎEquivalent measurement equipment may be used. Rated current vs. temperature characteristics (derating) KPZ 1608 S HR 121 A T DH5 Series name L×W×T dimensions Material name Specifications (Grade) Impedance Characteristic type Packaging style Internal code1.6×0.8×0.6 mm 1.6×0.8×0.8 mm () at 100MHz Impedance DC resistance Rated current Thickness T Part No. [100MHz] () Tolerance ()max. (A)max. (mm) 30 ±10 0.015 5.0 0.6 KPZ1608SHR300ATDH5 120 ±25% 0.045 2.0 0.6 KPZ1608SHR121ATDH5 220 ±25% 0.05 2.2 0.8 KPZ1608SHR221ATD25 600 ±25% 0.15 1 0.8 KPZ1608SHR601ATD25 1000 ±25% 0.3 0.8 0.8 KPZ1608SHR102ATD25 Measurement item Product No. Manufacturer Impedance E4991A+16192A Keysight Technologies DC resistance Type-7556 Y okogawa AEC-Q200 0.0 1.0 2.0 3.0 4.0 5.0 6.0Rated current (A) –55 –25 5 35 65 95 150125 Temperature (°C) SHR300A SHR102A SHR221A SHR121A SHR601A REACH SVHC-Free Lead FreeRoHS Pb Halogen Free BrCl
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20200717 (2/4) beads_automotive_power_kpz1608-hr_en.fm EMC Components KPZ1608-HR type Z VS. FREQUENCY CHARACTERISTICS (BY SERIES) KPZ1608-SHR series Z, X, R VS. FREQUENCY CHARACTERISTICS KPZ1608SHR300ATDH5 KPZ1608SHR121ATDH5 KPZ1608SHR221ATD25 KPZ1608SHR601ATD25 KPZ1608SHR102ATD25 1000 1200 800 900 700 600 500 400 300 200 100 100001000100101 Frequency (MHz) Impedance (Ω) KPZ1608SHR102A KPZ1608SHR300A KPZ1608SHR121A KPZ1608SHR221A KPZ1608SHR601A 1 10 100 1000 10000 Frequency (MHz) Impedance (Ω) Z R X Z R X 100 150 200 1 10 100 1000 10000 Frequency (MHz) Impedance (Ω) 300 100 150 200 250 01 10 100 1000 10000 Z R X Frequency (MHz) Impedance (Ω) 800 700 600 500 400 300 200 100 01 10 100 1000 10000 Z R X Frequency (MHz) Impedance (Ω) 1 10 100 1000 10000 Frequency (MHz) Impedance (Ω) 200 400 600 800 1000 1200 Z R X
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20200717 (3/4) beads_automotive_power_kpz1608-hr_en.fm EMC Components KPZ1608-HR type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN RECOMMENDED REFLOW PROFILE PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS PACKAGE QUANTITY TEMPERATURE RANGE, INDIVIDUAL WEIGHT The storage temperature range is for after the assembly. Dimensions in mm Thickness(T) 0.6±0.15mm 0.8±0.15mm 0.8±0.15 1.6±0.15 0.3±0.2 T 0.80.6 0.6 0.8 Dimensions in mm Natural cooling 10s 60 to 120s Preheating 30 to 60s Soldering 230°C 230°C 250 to 260°C 180°C 150°C Time Peak Temperature Type A B K Package quantity 4,000 pcs/reel Type Operating temperature range Storage temperature range Individual weight t=0.6mm (DH5) –55 to +150 °C –55 to +150 °C 3 mg t=0.8mm (D25) –55 to +150 °C –55 to +150 °C 4 mg ø180±2.0 2.0±0.5 ø13±0.2 ø21±0.8 Dimensions in mm 1.0 ø60min. 14.4max. 8.4 +2.0 –0.0 K 8.0±0.3 1.75±0.1 4.0±0.1 4.0±0.1 2.0±0.05 B A 3.5±0.05 Dimensions in mm Sprocket hole 1.5 +0.1 Cavity 160min. Taping 200min. 300min.Drawing direction Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20200717 (4/4) beads_automotive_power_kpz1608-hr_en.fm EMC Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% R H or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equip ment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equip- ment, measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product is mounted in a vehicle) or standard applications as general electronic equipment in automotive applications or standard applic ations as general electronic equipment in automotive applications in accordance with the scope and conditions described in this specification, while the said automotive or general electronic equipment including the said product is intended to be used in the usual operat ion and usage methods, respectively. Other than automotive or automotive products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliability, or wh ose failure, malfunction or defect could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applicati ons below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipmentɹɹ (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng pro- tection circuit/device or providing backup circuits in your equipment. REMINDERS