KPTF-1616RGBC-13 KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Features
z 1.6mmX1.6mm SMT LED, 0.7mm thickness. z Low power consumption. z Can produce any color in visible spectrum, including white light. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant.
Description
The Hyper Red device is based on light emitting diode chip made from AlGaInP. The Green source color devices are made with InGaN Light Emitting Diode. The Blue source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. Kingbright
SPEC NO: DSAM4764 REV NO: V.3B DATE: NOV/19/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1203013240 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ1/2 KPTF-1616RGBC-13 Hyper Red (AlGaInP) Water Clear 200 360 Green (InGaN) 500 750 Blue (InGaN) 80 140 120° Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red Green Blue 640 520 465 nm I F=20mA λD [1] Dominant Wavelength Hyper Red Green Blue 625 525 470 nm I F=20mA Δλ1/2 Spectral Line Half-width Hyper Red Green Blue nm I F=20mA C Capacitance Hyper Red Green Blue 100 100 pF V F=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 2.2 3.2 3.3 2.8 V I F=20mA IR Reverse Current Hyper Red Green Blue uA V R=5V Parameter Hyper Red Green Blue Units Power dissipation 84 120 120 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 150 100 100 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Kingbright
SPEC NO: DSAM4764 REV NO: V.3B DATE: NOV/19/2013 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1203013240 KPTF-1616RGBC-13 Hyper Red Kingbright
SPEC NO: DSAM4764 REV NO: V.3B DATE: NOV/19/2013 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1203013240 Green Kingbright
SPEC NO: DSAM4764 REV NO: V.3B DATE: NOV/19/2013 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1203013240 Blue Kingbright
SPEC NO: DSAM4764 REV NO: V.3B DATE: NOV/19/2013 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1203013240 KPTF-1616RGBC-13 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) Kingbright
SPEC NO: DSAM4764 REV NO: V.3B DATE: NOV/19/2013 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1203013240 PACKING & LABEL SPECIFICATIONS KPTF-1616RGBC-13 Terms and conditions for the usage of this document 1.The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2.The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4.The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5.The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6.All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes Kingbright