KPHBM-2012ETSGTC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

zBI -COLOR, LOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zPACKAGE : 2000PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT.

SPEC NO: DSAG9033 REV NO: V.1 DATE: OCT/19/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG Selection Guide Electrical / Optical Characteristics at TA=25°C Absolute Maximum Ratings at TA=25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength High Efficiency Red Super Bright Green 627 565 nm IF=20mA λD [1] Dominant Wavelength High Efficiency Red Super Bright Green 625 568 nm IF=20mA Δλ1/2 Spectral Line Half-width High Efficiency Red Super Bright Green nm IF=20mA C Capacitance High Efficiency Red Super Bright Green pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Super Bright Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current High Efficiency Red Super Bright Green uA VR = 5V Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ 1/2 KPHBM-2012ETSGTC HIGH EFFICIENCY RED (GaAsP/GaP) WATER CLEAR 4 17 SUPER BRIGHT GREEN (GaP) 7 20 120° Parameter High Efficiency Red Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage V Operating / Storage Temperature -40°C To +85°C Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity / luminous flux: +/-15%. Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V.

SPEC NO: DSAG9033 REV NO: V.1 DATE: OCT/19/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG KPHBM-2012ETSGTC High Efficiency Red

SPEC NO: DSAG9033 REV NO: V.1 DATE: OCT/19/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG Super Bright Green

SPEC NO: DSAG9033 REV NO: V.1 DATE: OCT/19/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG KPHBM-2012ETSGTC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm)