KPGB-0607VBA1ZGC KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ2528 / 1203016188 Rev No: V.1B Date: 09/14/2023 Page 1 / 4 PACKAGE DIMENSIONS SELECTION GUIDE Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. KPGB-0607VBA1ZGC 0.65 x 0.65 x 0.25 mm Bi-Color Surface Mount LED RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. DESCRIPTIONS The Blue source color devices are made with InGaN on Sapphire substrate Light Emitting Diode The Green source color devices are made with InGaN on Sapphire Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded
FEATURES
0.65 mm x 0.65 mm SMD LED, 0.25 mm thickness Low power consumption Package: 4000 pcs / reel Moisture sensitivity level: 3 Halogen-free RoHS compliant
APPLICATIONS
Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 5mA [2] Viewing Angle [1] Min. Typ. 2θ1/2 KPGB-0607VBA1ZGC ■ Blue (InGaN) Water Clear 10 40 140° ■ Green (InGaN) 50 200
© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ2528 / 1203016188 Rev No: V.1B Date: 09/14/2023 Page 2 / 4 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C KPGB-0607VBA1ZGC Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd: ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Parameter Symbol Emitting Color Value Unit Typ. Max. Wavelength at Peak Emission IF = 5mA λpeak Blue Green 463 515 - nm Dominant Wavelength IF = 5mA λdom [1] Blue Green 468 525 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 5mA Δλ Blue Green - nm Forward Voltage IF = 5mA VF [2] Blue Green 2.9 2.85 3.2 3.3 V Reverse Current (VR = 5V) IR Blue Green - 50 μA Temperature Coefficient of λpeak IF = 5mA, -10°C ≤ T ≤ 85°C TCλpeak Blue Green 0.04 0.05 - nm/°C Temperature Coefficient of λdom IF = 5mA, -10°C ≤ T ≤ 85°C TCλdom Blue Green 0.03 0.03 - nm/°C Temperature Coefficient of VF IF = 5mA, -10°C ≤ T ≤ 85°C TCV Blue Green -3.0 -3.0 - mV/°C ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Value Unit Blue Green Power Dissipation PD [1] mW Reverse Voltage VR 5 5 V Junction Temperature Tj 115 115 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF [2] 10 10 mA Peak Forward Current IFP [3] 50 50 mA Electrostatic Discharge Threshold (HBM) - 250 450 V Thermal Resistance (Junction / Ambient) Rth JA [4] 720 780 °C/W Thermal Resistance (Junction / Solder point) Rth JS [4] 580 650 °C/W Notes: 1. Within 35mW when multiple chips are lightened 2. The maximum ratings are valid for the case of lighting a single chip When two chips are lit at the same time, each chip should be driven at a current lower than 50% of the absolute maximum ratings 3. Duty Cycle ≤ 1 / 20, Pulse Width = 1ms. 4. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad). 5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ2528 / 1203016188 Rev No: V.1B Date: 09/14/2023 Page 3 / 4 KPGB-0607VBA1ZGC TECHNICAL DATA 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 Ta = 25 °C Spectral Distribution Wavelength (nm) Relative Intensity (a. u.) GreenBlue RELATIVE INTENSITY vs. WAVELENGTH 0.5 0.5 90° 15°0° 30° 45° 60° 75° -15° -30° -45° -60° -75° -90° 0.01.0 1.0 Ta = 25 °C SPATIAL DISTRIBUTION BLUE GREEN T a = 25 °C Forward Current vs. Forward Voltage Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 5 10 15 20 Ta = 25 °C Luminous Intensity vs. Forward Current Forward current (mA) Luminous intensity normalised at 5 mA - 4 0 - 2 00 2 04 06 08 0 1 0 0 Forward Current Derating Curve Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 100 Luminous Intensity vs. Ambient Temperature Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C T a = 25 °C Forward Current vs. Forward Voltage Forward voltage (V) Forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 0 5 10 15 20 T a = 25 °C Luminous Intensity vs. Forward Current Forward current (mA) Luminous intensity normalised at 5 mA - 4 0 - 2 00 2 04 06 08 0 1 0 0 Forward Current Derating Curve Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 100 Luminous Intensity vs. Ambient Temperature Ambient temperature (°C) Luminous intensity normalised at Ta = 25 °C
© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ2528 / 1203016188 Rev No: V.1B Date: 09/14/2023 Page 4 / 4 KPGB-0607VBA1ZGC TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) PACKING & LABEL SPECIFICATIONS REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PRECAUTIONARY NOTES 1. The information included in this document reflects represent ative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be rep roduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright applicati on notes available at https://www.kingbright.com/application_notes