KPC410 COSMO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

DATE: 08/14/2008 NO.61P04029 REV cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 SHEET 1 OF 7 2 Super High Speed Response Photocoupler

  • Features 1. 5 pin Mini-flat package. 2. Super high speed response (tPLH,tPHL:typ.45ns at RL=350 ohm). 3. Instantaneous common mode rejection voltage(CMH:typ. 500V/us). 4. High isolation voltage between input and output (Viso:2500Vrms). 5. Low input current drive (IFHL: Max. 5mA). 6. LSTTL and TTL compatible output.
  • Applications 1. High speed interfaces for computer peripherals, microcomputer systems. 2. High speed line receivers. 3. Noise reduction. 4. Interfaces for data transmission equipment. 5.Inverter.

DATE: 08/14/2008 NO. 61P04029 REV cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 SHEET 2 OF 7 2 1. OUTSIDE DIMENSION : UNIT (mm) 0.10±0.10 2.30±0.5 0.50 7.00±0.4 0.40 2.54 4.40±0.5 3.90±0.5 Date Code TOLERANCE : ±0.2mm 2. SCHEMATIC : Top View 1.Anode 3.Cathode 4.GND 5.Vo 6.Vcc

DATE: 08/14/2008 NO. 61P04029 REV cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 SHEET 3 OF 7 2

  • Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Ratin g Unit Forward current (*1) IF 25 m A Peak forward current (*2) IFM 40 m A Reverse voltage VR 5 V Input Power dissipation PD 45 mW Supply voltage VCC 7 V High level output voltage VOIL 7 V Low level output current IOL 50 m A Output Output collector power dissipation PC 85 mW Isolation voltage 1 minute (*3) Viso 2500 Vrms Operating temperature Topr -40 to +85 ℃ Storage temperature Tstg -55 to +125 ℃ Soldering temperature 10 second Tsol 260 ℃
  • Electro-optical Characteristics ( Ta= 0 to+ 85°C unless otherwise specified) Parameter Symbol Conditions MIN. TYP . MAX. Unit Input forward voltage (*4) VF IF=10mA,Ta=25℃ – 1.6 1.75 V Input reverse voltage BVR IR=10uA,Ta=25℃ 5 – - V Input capacitance CIN VF=0, f=1MHZ – 60 - pF Logic (1) output current IOH VCC=3.3V,VO=5.5V,IF=250uA - 2 250 uA Logic (0) output voltage VOL VCC=3.3V,IF=5mA, IOL(Sinking)=13mA - 0.4 0.6 V Logic (1) supply current ICCH VCC=3.3V,IF=0mA - 7 15 mA Logic (0) supply current ICCL VCC=3.3V,IF=10mA - 13 18 mA Leak current (*5) II-O 45%RH,Ta=25℃,t=5s,VI-O=3000VDC – - 1.0 mA Isolation resistance (input-output) (*5) RI-O VI-O=500V, Ta=25℃ - 10 12 - Ω Capacitance (input-output ) (*5) CI-O f=1MHZ, Ta=25℃ - 0.6 - pF Propagation delay time Output (0)Æ(1) (*6) tPLH - 45 100 ns Propagation delay time Output (1)Æ(0) (*6) tPHL IF=7.5mA,VCC=3.3V,RL=350Ω, CL=15pF,Ta=25℃ - 45 75 ns Output rise-fall time (10 to 90%) tr,tf IF=7.5mA,VCC=3.3V,RL=350 – 30 - ns Instantaneous common mode rejection voltage “output(0)” (*7) CMH IF=0mA, VCM=10V,VO(Min)=2.0V RL=350Ω - 500 - V/us Instantaneous common mode rejection voltage “output(1)” (*7) CML IF=5mA, VCM=10V,VO(Max)=0.8V RL=350Ω - -500 - V/us

DATE: 08/14/2008 NO. 61P04029 REV cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 SHEET 4 OF 7 2 Note ) Typical values are all at Vcc = 3.3V, Ta= 25°C *1 Ta=0 to 70°C. *2 Pulse width <= 1ms *3 40 to 80%RH AC for 1 minute ,f=60HZ. *4 At Iin =10mA, VF decreases at the rate of 1.6mV/°C if the temperature goes up. *5 Measured as 2-pin element. Connect pins 2 and 3, connect pins 5, 6, 7 and 8. *6 Refer to the Fig. 1. *7 CMH represents a common mode voltage ignorable rise time ratio that can hold logic (1) state in output. CML represents a common mode voltage ignorable fall time ratio that can hold logic (0) state in output.

  • Recommmended Operating Conditions Parameter Symbol Min Max Unit Low level input current IFL 0 250 u A High level input current IFH 7.0 15 m A Supply voltage VCC 4.5 5.5 V Fanout (TTL load ) N -8 - Operating temperature Topr -40 85 ℃ Circuit Block Diagram Vcc Vo GND Anode

DATE: 08/14/2008 NO. 61P04029 REV cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 SHEET 5 OF 7 2 Fig.1 Test Circuit for Propagation Delay time Vo Pulse input 350Ω 0.1uF CL TPLH 3.75mA TPHL tf 10% 90% VO tr IF VOL 1.5V 0mA 7.5mA Fig.2 Test Circuit for Instantaneous Common Mode Rejection Voltage SW A VCM B 0.1uF 350Ω CL Vo VO SW:A (IF=5mA) VOL tf 10% 10% SW:B (IF=0) VO VCM tr 90% 90% Vo(min) Vo(max) 10V

DATE: 08/14/2008 NO. 61P04029 REV cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 SHEET 6 OF 7 2 Fig.2 Input Diode Forward Voltage vs. Forward Current Forward Voltage V F (V) Forward Current IF (mA)

DATE: 08/14/2008 NO. 61P04029 REV cosmo ELECTRONICS CORPORATION Photocoupler : KPC410 SHEET 7 OF 7 2