KPB-2012SURKCGKC KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 6
Technical content
Features
z 2.0mmx1.25mm SMT LED, 1.1mm thickness. z Bi -color,Low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant.
Description
The Hyper Red source color devices are made with Al- GaInP on GaAs substrate Light Emitting Diode. The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL5646 REV NO: V.2A DATE: NOV/22/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203012313 Selection Guide Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2 θ1/2 KPB-2012SURKCGKC Hyper Red (AlGaInP) Water Clear 120 200 150° *40 *80 20 55 *20 *50 Green (AlGaInP) Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red Green 650 574 *645 *574 nm I F=20mA λD [1] Dominant Wavelength Hyper Red Green 630 570 *630 *570 nm I F=20mA Δλ1/2 Spectral Line Half-width Hyper Red Green 20 nm I F=20mA C Capacitance Hyper Red Green 15 pF V F=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 2.5 2.5 V I F=20mA 1.95 2.1 Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. * Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAL5646 REV NO: V.2A DATE: NOV/22/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203012313 KPB-2012SURKCGKC Hyper Red
SPEC NO: DSAL5646 REV NO: V.2A DATE: NOV/22/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203012313 Green
SPEC NO: DSAL5646 REV NO: V.2A DATE: NOV/22/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203012313 KPB-2012SURKCGKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)
SPEC NO: DSAL5646 REV NO: V.2A DATE: NOV/22/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203012313 PACKING & LABEL SPECIFICATIONS KPB-2012SURKCGKC