KP545R66E6F KODENSHI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
- Descriptions The KP5450F00E6F is a Full Color LED consisting of small and thin form plastic leaded chip carrier (PLCC) 6-pin package, AlGaInP red chip, GaN Green, InGaN blue chip. 2. Features ◆ Small Footprint Surface Mount Package ( 5.4 L × 5.0 W × 1.6 H [mm3]) ◆ Typical Forward Voltage(VF) : Blue : 3.3V @ Forward Current(IF)=20mA Green : 3.2V @ Forward Current(IF)=20mA Red : 2.2V @ Forward Current(IF)=20mA ◆ Operation Temperature from -40℃ to +85℃ ◆ Soldering methods : IR reflow soldering ◆ Taping : 12㎜ conductive black carrier tape & antistatic clear cover tape 3. Applications ◆ LCD Backlighting ◆ Out Door/ In Door Display ◆ Front panel indicator lamp ◆ Symbol Backlighting AUK-QM-043-2(C) AUK CORP
- Outline Dimensions and Material Descriptions ◆ Outline Dimensions Unit : [mm] BLUE RED GREEN 5.4 ◆ Material Descriptions AUK-QM-043-2(C) AUK CORP No. Item Material ① Package PPA InGaN, Gap, AlGaInP ⑤ Encapsulant Wire Au Silicone ② Die Adhesive Clear Sillicone ③ LED Chip ⑥ Lead Cu Alloy ② ⑤ BLUE RED AUK-QM-043-2(C) AUK CORP
- Absolute Maximums *1. IFP was measured at Tw ≤ 1 msec of pulse width and D ≤ 1/10 of duty ratio. *2. Soldering time : 5 Sec 6. Electro-Optical Characteristics (TA = 25℃) Forward current Pulse forward current *1 Power dissipation Operating temperature Storage temperature Soldering Temperature *2 Symbol Tsol. -40 ~ +100 Tstg. Topr. °C Ratings IF mA mA PD mW 30 30 Red IFP Parameter Symbol BlueGreen Red Conditions Unit 1.8 - 2.5 MaxMinParameter Typ Unit 260 -30 ~ +85 100 110 110 *1. The luminous intensity IV was measured at the peak of the spatial pattern which may not be align ed with the mechanical axis of the LED package. *2. 2Θ1/2 is the off-axis where the luminous intensity is 1/2 of the peak intensity. mcd 0.250 0.250 0.350 - Red_IF=12mA, Green_IF=10mA, Blue_IF=7mA uA Luminous intensity*１,3 Chromaticity coordiante*3 R,G,B R,G,B IV x y 700 1000 Red_IF=12mA, Green_IF=10mA, Blue_IF=7mA0.350 - 1500 Iv IF=20mAGreen Blue 120IF=60mA IR 600 200 Half angle*2 2Δθ1/2 - Luminous Intensity Red VF 510 3.6 3.6Green 2.8 - Forward voltage Blue 600 mcd- 1800 deg.- - 630 530 nm - 475 -Dominant Wavelength Red WD IF=20mAGreen Blue 455 615 IF=20mA V 2.8 - 120 - 400 Reverse Current VR=5V -- *2. 2Θ1/2 is the off-axis where the luminous intensity is 1/2 of the peak intensity. AUK-QM-043-2(C) AUK CORP
- Ranks ◆ IV, Color Rank Table*1 *1. KP5450F00E6F marked as TA1(IV, Color Rank) has the IV range 0.7~1.0cd and Color range A1 area. IV, Color Rank @ Red_IF = 12 mA, Green_IF = 10 mA, Blue_IF = 7 mA Luminuous Intensity [mcd] Chromaticity - T : 700 ~ 1000 A1 E1 - U : 1000 ~ 1200 B1 F1 - V : 1200 ~ 1500 C1 G1 - - D1 H1 - ◆ Color Coordinate Rank 0.2950 0.2500 x y x y x y x y 0.2975 0.2750 E1 F1 G1 H1 0.2500 0.2500 A1 B1 C1 D1 x y x y x y x y AUK-QM-043-2(C) AUK CORP
◆ The CIE(x, y) Chromaticity Diagram 8. Part Numbering KODENSHIAUK K P 5450 F00 E 7 F - XXX ⑥ PKG Thickness : 1.6mm ⑤ Chip (LED 3Chip) ④ Lead : 6Pin ③ Color : F Full Colr ② PKG Size : 5.4 x ① PKG Type : PLCC LED Rank : VF/Iv Rank AUK-QM-043-2(C) AUK CORP
- Characteristic Graphs Forward current vs. Ambient temperature luminous Intensity vs. Forward current Relative luminous intensity vs. Ambient temperature Relative intensity vs. Wavelength Forward current IF[mA] Relative intensity Relative intensity PO IF = 50mA 25 50 75 100 125 150 0 5 10 0.5 (IF) 1.5 15 20 25 30 3580 Ambient temperature(Ta) 400 20 60 ( )℃100 Forward current( I )F (㎃) Relative intensity (%) 100 --- Red --- Blue --- Green Forward current vs. Forward voltage Radiant Pattern Relative intensity PO Ambient temperature Ta[℃] Relative intensity[%] Angle(deg) IF = 50mA -20 0 20 0.1 806040 100 +20 + 1 0 0 100 +80 +40 +60 -80 - 1 0 0 100 -20 -40 -60 700 Wavelength(λ) Relative intensity 400 300 500 600 100 1000800 900 (㎚) --- Blue --- Green (V)3.0 Forward voltage(V ) 2.0 F 4.0 --- Red --- Blue --- Green 1.0 Forward current(I ) F (㎃) Ta=25℃ AUK-QM-043-2(C) AUK CORP
- Reliability Test ◆ Criteria ◆ Test Conditions ITEM Symbol Test Conditions Critetria for Judgement Min. Max. IV IF = 60mA L.S.L. × 0.5 U.S.L. × 1.2 U.S.L. × 2.0 Reverse Current IR VR = 5V - Forward Voltage VF IF = 60mA Tsld = 260℃, 10sec. 6 Min No. Test ITEM Standard Test Method Test Conditions Note #of Damaged/ Test No. Luminous Intensity
22 PCS 0/1
2 Temperature Cycle
H : +100℃ 15min ∫ 5 min L : -40℃ 15min
300 Cycles 22 PCS 0/1
(Reflow Soldering) H : +100℃ 5min AUK CORP
3 Thermal Shock
H : +100℃ 5min ∫ 10 sec L : -10℃ 5min
7 High Temperature /
High Humidity 85℃ / 85%RH 1000 hrs.
22 PCS 0/15 Low Temperature
6 DC Operating Life
Ta=-40℃ 1000 hrs. 25℃, IF=60mA 1000 hrs. 22 PCS 0/1
4 High Temperature
Storage Ta=100℃ 1000 hrs. 22 PCS AUK-QM-043-2(C) AUK CORP
- Recommended Soldering Pattern Unit : [mm] 12. Reflow Soldering Profile 5 sec. MAX. Max: 260C Temperature (℃) 240 13. Manual Soldering Codition For manual soldring, you have to complete soldering within 3 seconds under 260℃. (The temperature at tip of solder iron). AUK-QM-043-2(C) AUK CORP Within 2min 50 sec. MAX. 150 100 Temperature (℃) Time (sec.) 240 AUK-QM-043-2(C) AUK CORP
- Tape and Reel Specifications ◆ Tape ◆ Reel UNIT : [mm] UNIT : [mm] Φ B A A' Φ ◆ Quantity : 1,000pcs/Reel ◆ Cover Tape Adhesion : 0.1 ~ 0.7N for 45° pulling up. AUK-QM-043-2(C) AUK CORP
- Packing Specifications UNIT : [mm] Label Label A 215±5 230±5 Outer Box Reel Shilding Bag ◆ Specifications of Carrier Tape, Reel and Shilding Bag AUK-QM-043-2(C) AUK CORP Outside Surface Conductivity 1x104 ~1x106 1x108 1x1010 ~1x1012 Inside 1x1011~1x1013 Item Carrier Tape Reel Shilding Bag Outer Box 355 240 230Label B AUK-QM-043-2(C) AUK CORP
- Label ◆ Label A 50mm 90mm KP5450F00E6F-XXX ◆ Label B 50mm 90mm AUK-QM-043-2(C) AUK CORP
- Cautions ◆ Cautions in Usage ■ Store and use where there is no exterior force that will cause change in shape. ■ Store and use where there is no Hydrogen Sulfide gas, or any other corrosive gas. ■ Once the package is opened, the products should be used within 3 days. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date) ■ If opened more than 3 days in an atmosphere 5 ℃ ~35 ℃, RH 60%, they should be treated at 60 ℃ ±5 ℃ for 15 hrs. ■ Solder the lead pin under conditions of the absolute maximum rating chart and do not apply force on the solder pin after soldering. ◆ Guarantee Period and Scope ◆ Guarantee Period and Scope ■ Period One year after delivery to the desired place. ■ Scope Replacement of products will be done if any problems lie in our company's products. However, we are not liable for your damage due to lack of caution. ◆ Others ■ Any doubts concerning this specification should be discussed fully by both parties. AUK-QM-043-2(C) AUK CORP