KP3020_15 COSMO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

( CTR Min. 0% at I F mA V CE =5V ) High isolation voltage between input and output ( Viso 5000Vrms ) Compact dual in line package AC input Pb free and RoHS compliant MSL class 1 Agency Approvals UL Approved ( No. E 169586 ): UL1577 c UL Approved ( No. E 169586 VDE Approved (No. 101347): DIN EN60747 FIMKO Approved: EN60065, EN 60950 , EN60335 SEMKO Approved: EN60065, EN60950, EN60335 Applica tion s System appliances Limit Switches Sensors Programmable controllers applications for Low Input Photocouplers and High Vceo Photocouplers Telephone sets Telephone exchangers Thermostats Signal transmission between circuits of different potentials and impedances

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER Outside Dimension Unit mm TOLERANCE ±0.2mm 13.00 0.25 13.00 7.62 6.50 1.20 3.00 0.40 0.50 2.54 2.70 3.50 9.68 10° ±0.2 0.25 3.50 6.50 7.62 10.16 0.90±0.25 0.90±0.25 11.80 +0.2 -0.5 2.54 1.20 9.68 6.50 0.25 9.68 3.50 3.00 0.30 1.20 0.50 2.54 2.70 2.54 7.62 10.16±0.50 1.00 10.00±0.4 6.50 7.62 3.50 2.54 1.20 0.10±0.1 0.25 9.68 10° KP KP 020S KP 020L KP 020H 1.Dual-in-line type. 2.Surface mount type. 3.Long creepage distance type 4.Long creepage distance for surface mount type. Device Marking Notes cosmo YWW Year c ode / WW: Week c ode cosmo 3020 YWW

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER Absolute Maximum Ratings (Ta=25 Parameter Symbol Rating Unit Input Forward current I F mA Peak forward current I FM A Power dissipation P D mW Output Collector emitter voltage V CEO V Emitter collector voltage V ECO V Collector current I C mA Collector power d issipation P C 150 mW Total power dissipation P tot 200 mW Isolation voltage 1 minute V iso 5000 Vrms Operating temperature T opr 55 to +115 Storage temperature T stg 55 to +125 Soldering temperature 10 second s T sol 260 Electro optical Characteri stics (Ta=25 Parameter Symbol Conditions M in T yp M ax Unit Input Forward voltage V F I F 20mA 1.2 1.4 V Peak forward voltage V FM I FM 0.5A V Terminal capacitance C t V=0, f=1KHz pF Output Collector dark current I CEO V CE =20V 0.1 μ A Transfer charac teristics Current transfer ratio CTR I F mA, V CE =5V 600 Collector emitter saturation V CE(sat) I F 20mA, I C =1mA 0.1 0.3 V Isolation resistance R iso DC500V 5x10 Ω Floating capacitance C f V=0, f=1MHz 0.6 1.0 pF Cut off frequency f C V CC =5V, I C =2mA, R L =100 Ω KHz Response time ( Rise ) t r V CE =2V, I C =2mA, R L =100 Ω μ s Response time ( Fall ) t f μ s

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER Classification table of current transfer ratio is shown bel ow. KP3 020 Model No. CTR ( % ) KP 020 A 0 ~ 600 KP 020 B 60 ~ 3 Fig.1 Current Transfer Ratio vs. Forward Current Current T ransfer R atio CTR ( % ) 0.2 0.1 0.5 140 100 120 Forward C urrent I F (mA) Fig.2 Collector Power Dissipat ion vs. Ambient Temperature Fig.3 Collector Dark Current vs. Ambient Temperature Collector Power Dissipation P C ( mW ) -55 100 125 200 150 250 115 Collector Dark Current I CEO ( A ) -55 -11 -10 V =20V 115 CE Ambient Temperature Ta ( Ambient Temperature Ta ( Fig.4 Forward Current vs. Ambient Temperature Fig.5 Forward Current vs. Forward Voltage Forward Current I F ( mA ) -55 115 125 Forward Current I F ( mA ) 500 1.8 -25° 1.6 1.2 1.0 1.4 50° Ta=75° C 100 200 C 2.4 2.0 2.2 C C 25° C Am bient Temperature Ta ( Forward Voltage V F (V)

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER Fig.6 Collector Current vs. Collector Emitter Voltage Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature Current I C (mA) 5mA 20mA I =30mA Ta=25° 10mA C F Relative Current Transfer Rati o ( % ) -55 -25 115 I =1mA V =5V 150 100 F CE Collector Emitter Voltage V CE (V) Ambient Temperature Ta Fig.8 Collector Emitter Saturation Voltage vs. Ambient Temperature Fig.9 Collector Emitter Saturation Voltage vs. Forward Current Collector Emitter Saturation Voltage V CE ( V ) -55 100 115 0.08 0.04 0.02 0.01 0.03 0.06 0.05 0.07 Ic=1mA I =20mA 0.1 0.09 F Collector Emitter Saturation Voltage V CE ( V ) Ic=5mA Ic=7mA Ic=1mA Ic=3mA Ic=0.5mA Ta=25 C Ambient Temperature Ta ( Forward Current I F (mA) Fig.10 Response Time ( Rise ) vs. Load Resistanc e Fig.11 Response Time ( Fall ) vs. Load Resistance Response Rise Time ( us ) C Ta=25° 0.5 0.2 0.1 tr Ic=2mA V =2V 100 100 CE Response Fall Time ( us ) 100 C Ta=25° 0.2 0.1 0.5 100 Ic=2m A V =2V tf C E Load Resistance R L Ω Load Resistance R L Ω

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER Test Circuit f or Resp onse Time Vce tr tf 90% 10% R Vcc Vce I F L I F

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER Recommended Soldering Conditions (a) Infrared reflow soldering Peak reflow soldering Time of peak reflow temperature Time of temperature higher than 230 Time to preheat t emperature from 180~190 Time(s) of reflow Flux or below (package surface temperature) 10 sec 60 sec 120 sec Two Rosin flux containing small amount of chlorine (The f lux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrare d Reflow 6 0 -1 2 0 se c 3 0 -6 0 s e c t (s) temperature 1 0 se c M a x. (b) Wave soldering Temperature Time Preheating conditions T ime s ) of reflow Flux 260 or below (molten solder temperature) 10 seconds or less 120 or below (package surface temperature) One Rosin flux contain ing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions Fluxes Avoid removing the residual flux with f reon based and chlorine based cleaning solvent Avoid shorting between portion of frame and lead

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER Numbering System K P X Y (Z) Note K P 0 = Part No. X Lead f orm option ( S H L Y CTR r ank ( A, B Z Tape and r eel option ( TL,TR, TLD,TRU) Option

Description

S (TL surface mount type package + TL tape & reel o ption 000 un its per reel S (TR surface mount type package + TR tape & reel option 000 un its per reel L (TLD) long creepage distance for surface mount type package TLD tape & reel option 00 unit s per reel L (TRU) long creepage distance for surfac e mount type package TRU tape & reel option 00 un its per reel Recommended P ad L ayout for S urface M ount L ead F orm U nit : mm 2.Long creepage distance for surface mount type. 8 pin SMD 8 pin L 1.Surface mount type.

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER pin SMD Carrier Tape & R eel Direction of feed from reel TL Direction of feed from reel TR unit mm

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER pin L C arrier T ape & R eel

1.50 MIN

1.50 TLD Direction of feed from reel 24.40 30.40 Max. +0.20 -0.00 100±0.50 13.0±0.20 330 Max. Unit:mm TOLERANCE ±0.2mm TRU Direction of feed from reel 12.00 4.00 2.00 11.50 24.00±0.3 10.15 1.75 12.35 4.60 0.30

Cosmo Electronics Corp. Document No. 9P12001 http://www.cosmo ic.com cosmo K P Series 8PIN PHOTOTRANSISTOR PHOTOCOUPLER Application N otice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliabil ity, function...etc., cosmo reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and responsibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Per sonal c omputer b. OA machine c. Audio / Video d. Instrumentation e. Electrical a pplication f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power con trol This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or i n part without any written permission expressed f r o m cosmo.