KP1510STRU

KP1510_15 COSMO | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Features

High noise immunity characterized by 5kV/μs minimum common mode rejection (CM R )at V CM =1500V 2.5A maximum peak output cur rent I CC = 5 mA maximu m supply current Wide supply voltage range from 15V to 30V Fast power switching application 500ns max. propagation delay 100ns min. P WD p rotection scheme Under Voltage Lock Out (UVLO) with hysteresis I ndustrial temperate range 0°C to 115 8. MSL class 1 Agency Approvals UL Approved (No. E169586): UL1577 c UL Approved (No. E169586) VDE Approved (No. 40020973): DIN EN607 Application s Industrial inverter s Switch mode power supply A C/Brushless DC motor drives IGBT/Power MOSFET gate drive Truth Table The use of a 0.1μF bypass capacitor must be connected between pins 8 and 5 is recommended. LED OUTPUT ON HIGH LEVEL ON OFF OFF LOW LEVEL OFF ON

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Outside Dimension Unit mm Device Marking Notes: cosmo 1510 YWW Year c ode / WW: Wee k c ode cosmo Y W W 13.00 13.00 0.26 6.50 7.62 1.20 3.00 0.4 3.50 0.5 2.54 9.68 2.70 0.3 1.20 0.5 3.00 3.50 2.54 2.54 2.54 2.70 9.68 10.00 1.00 0.78 7.62 6.50 2.54 2.54 2.54 3.50 1.20 0.25 9.68 10° 6.50 7.62 10.16 0.90 ± 0.25 0.90 ± 0.25 11.80 0.25 +0.2 -0.5 TOLERANCE ±0.2mm 2.54 2.54 2.54 3.50 1.20 0.25 9.68 1.Dual-in-line type KP1510 2.Surface mount type KP1510S 3.Long creepage distance type KP1510H 4.Long creepage distance for surface mount type KP1510L

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Absolute Maximum Ratings (Ta = 25°C) Parameter Symbol Rating Unit Storage t emperature T STG 55 to +125 Operating t emperature T OPR 0 to +1 Junction t emperature T J 0 to +125 Lead w ave s o lder t emperature T SOL 260 for 10 Secs Average i nput c urrent I F(AVG) mA Peak t ransient f orward c urrent (10) I F(PEAK) A Operating f requency (11) f KHz Reverse i nput v oltage V R V Peak o utput c urrent (1) I O(PEAK) 2.5 A Supply v oltage TA V CC V EE 0 to 35 V 0 to 30 Peak o utput v oltage V O(PEAK) 0 to V CC V Input s ignal r ise and f all t ime t R(IN) t F(IN) 500 ns Input p ower d issipation (2)(4) P D I mW Output p ower d issipation (3)(4) P D O 250 mW Recommended Operating Conditions Pa rameter Symbol Rating Unit Ambient o perating t emperature T A 0 to +1 Power s upply V CC V EE 15 to 30 V Input c urrent (O n I F(ON) 7 to 16 mA Input v oltage (O ff V F(OFF) 3.6 to 0.8 V Isolation Characteristics Parameter Symbol Rating Min. Typ. Max. Unit Input o utput i solation v oltage V ISO V A =25 R H t 1.0min, I O 10uA,50Hz (5)(6) 5000 V RMS Isolation r esistance R ISO V O =500V (5) Ω Isolation c apacitance C ISO V O =0V, Freq=1.0MHz (5) pF

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER

Electrical Characteristics

(Ta = 25 Parameter Symbo l Test Condition Min. Typ. Max. Unit Input f orward v oltage V F I F =10mA 1.2 1.5 1.8 V Temperature c oefficient of f orward v oltage F T A)) 1.8 m V Input r everse b reakdown v oltage BV R I R =10uA V Input capacitance C IN f=1MHz V=0 pF Output current (*A) “H” level (1) I OH V O CC 2.5V 0.5 1.5 A V O CC 2.0 “L” level (1) I OL V O EE +2.5V 0.5 2.0 A V O EE +4V 2.0 Output voltage “H” level V OH I F =10mA, I O 100mA V CC V CC V “L” level V OL I F =0mA, I O =100mA V EE +0.1V V EE +0.5V Supply current “H” level I CCH V O =Open ,I F =7 to 16mA 2.5 5.0 mA “L” level I CCL V O =Open ,V F 3.0 to 0.8V 2.5 5.0 Threshold input current “Output L→H” I FLH I O =0mA ,V O >5V 2.3 5.0 mA Threshold input voltage “Output H→L” V FHL I O =0mA ,V O <5V 0.7 V Under v oltage l ockout t hreshold V UVLO+ I F =10mA ,V O >5V 11.0 12.3 13.5 V V UVLO I F =10mA ,V O <5V 9.0 10.7 12.0 Under v oltage l ockout t hreshold h ysteresis UVLO HYS 1.6 V

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Switching Characteristics (Ta = 25 Parameter Symbol Test Condition Min. Typ. Max. Unit Propagation delay time “L→H” t pLH I F =7mA to 16mA Rg=10 Ω,Cg=10nF F=10KHz,Duty Cycle=50% 0.1 0.3 0.5 us “H→L” t pHL 0.1 0.3 0.5 us Pulse w idth d istortion t Phl t pLH P WD 0.3 us Propagatio n d elay d ifference Between AnyTwo Parts or Channels Phl t Plh (7) P DD (Skew) 0.35 0.35 us Output rise time (10% 90%) t r 0.1 us Output fall time t f 0.1 us UVLO t urn o n d elay T UVLO ON I F =10mA, V O >5V 0.8 us UVLO t urn o ff d elay T UVLO OFF I F =10mA, V O <5V 0.6 us Common mode transient immunity at high level output C MH T A V CC =30V, I F =10 mA to 16mA V CM =1500V (8) KV / μs Common mode transient immunity at low level output C ML T A V CC =30V, V F =0V V CM =1500V (9) KV / μs Notes: 1. Maximum pulse width = 10μs, maximum duty cycle = 1.1% 2. Derate linear ly above 87°C, free air temperature at a rate of 0.77mW/°C 3. No derating required across temperature range. 4. Functional operation under these conditions is not implied. Permanent damage may occur if the device is subjected to conditions outside these ra tings. 5. Device is considered a two terminal device: Pins 2 and 3 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 6. 5,000 VRMS for 1 minute duration is equivalent to 6,000 VACRMS for 1 second duration. 7. The difference between t PHL and t PLH between any two KP1510 parts under same test conditions. 8. Common mode transient immunity at output high is the maximum tolerable negative dVcm/dt on the trailing edge of the common mode impulse signal, Vcm, to assure that the output will remain hig h (i.e. V O > 15.0V). 9. Common mode transient immunity at output low is the maximum tolerable positive dVcm/dt on the leading edge of the common pulse signal, Vcm, to assure that the output will remain low (i.e. V O < 1.0V). 10. Pulse Width, PW 1μs, 300pps 11. Exponential Waveform, I O (PEAK)  2.5A 0.3μs)

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Fig.1 F orward Current vs. Forward Voltage Fig.2 Ou tput Voltage vs. Forward Current Forward C urrent I F (mA) 1 .1 1 .2 1 .3 1 .4 1.5 1 .6 1 0 0 0 1 0 0 1 0 1 .0 0 .1 0 .0 1 0 .00 1 T a = 2 5 O utput V oltage Vo(v) 1 0 1 5 2 0 2 5 3 0 Forward Voltage V F (V) Forward Current I F (mA) Fig.3 Output High Current vs. Ambient Temperature Fig.4 Output High Voltage vs. Output High Current Output High Current I O H (A) -40 -20 1.0 1.2 1.4 1.6 1.8 2.0 I F = 7 to 16mA V OUT = (V CC -2.5V) V CC = 15 to 30V V EE = 0V 100 120 Output H igh Voltage Drop OH V CC V 0.5 1.0 1.5 2.0 2.5 I F = 7 to 16m A V C C = 15 to 30V V E E = 0V 115 -30 Ambient Temperature Ta ( Output High Current I OH (A) Fig.5 Output Low Current vs. Ambient Temperature Fig.6 Output Low Voltage vs. Output Low Current Output Low Current I OL (A) -40 -20 1.0 1.2 1.4 1.6 1.8 2.0 V F (OFF) = -3.0 to 0.8V V OUT = 2.5V V CC = 15 to 30V V EE = 0V 100 120 Output Low Voltage V OL (V) 0.5 1.0 1.5 2.0 V F (O FF) = -3.0 to 0.8V V C C = 15 to 30V V E E = 0V 115 -30 Ambient Temperature Ta ( Output Low Current I OL (A)

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Fig.7 Propagation Delay vs. F orward Current Fig.8 Propagation Delay vs. Ambient Temperature Propagation D elay T P ns 100 200 300 400 500 V C C = 30V , V E E = 0V R g = 10Ω , C g = 10nF T P LH T P HL Ta = 25°C D uty C ycle = 50% f = 10KH z Propagation D elay T P (ns -40 100 200 300 400 500 T PLH T PHL -20 100 V CC = 30V , V EE = 0V Rg = 10Ω , Cg = 10nF I = 10mA Duty Cycle = 50% f = 10KHz 120 F Forward Current I F (mA) Ambient Temperature Ta ( Fig.9 Propagation Delay vs. Series Load Resistance Fig.10 Propagation Delay vs. Load Capacitance Propagation D elay T P (ns) 100 200 300 400 500 T PLH T PHL V CC = 30V , V EE = 0V Cg = 10nF , Ta = 25°C I = 10mA Duty Cycle = 50% f = 10KHz F Propagation D elay T P (ns) 100 200 300 400 500 T PLH T PH L 100 V C C = 30V , V EE = 0V R g=10 Ω , Ta = 25°C I = 10m A D uty C ycle = 50% f = 10KH z F Series L oad R esistance Rg Ω L oad C apacitance Cg nF) Test Circuit Fig. Top View Fig. I OPL Measure 0.1uF 47uF V CC = 15V to 30V 0.1uF 47uF V V OL Iol A

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Fig. I OPH Me asure Fig. V O L Measure 0.1uF 47uF 0.1uF 47uF Ioh V OH V CC = 15V to 30V V I A F 0.1uF V CC = 15V to 30V V O 100mA Fig. V O H Measure 0.1uF V CC = 15V to 30V V O 100mA I =7 to 16mA F Fig. tp LH, tp HL, t t Measure 0.1uF V CC = 15V to 30V V O F = 10KHz Duty Cycle = 50% Cg=10nF Rg=10Ω t r I F V OUT t PLH t PHL t f 90% 50% 10%

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Fig. C MH, C ML, M easure 0.1uF V CC = 30V V O B A t V CM V O V O V OH V OL Switch at A: I F =10mA Switch at B: I F = 0mA I F V C M =1500 ML MH ) is the maximum rate of rise (fall) of the common mode voltage that can be sustained with the output voltage in the low (high) state.

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Recommended Soldering Conditions (a) Infrared r eflow soldering Peak reflow soldering Time of peak reflow temperature Time of temperature higher than 230 Time to preheat t emperature from 180~190 Time(s) of reflow Flux or below (package surface temperature) 10 sec 60 sec 120 sec T wo Rosin flux containing small amount of chlorine (The f lux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 6 0 -1 2 0 se c 3 0 -6 0 s e c t (s) temperature 1 0 se c M a x. (b) Wave soldering Temperature Time Preheating c onditions T ime s ) of reflow Flux 260 or below (molten solder temperature) 10 seconds or less 120 or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recomme nded.) (c) Cautions Fluxes Avoid removing the residual flux with f reon based and chlorine based cleaning solvent Avoid shorting between portion of frame and leads.

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Numbering System K P1510 X Y Note K P1510 = Part No. X Lead f orm opti on blank S H L ) Y Tape and r eel option ( TL TR TLD TRU Option

Description

S (TL surface mount type package + TL tape & reel option 000 u n its per reel S (TR surface mount type package + TR tape & reel option 000 u n its per reel L (TLD long creepage distance for surface mount type package T LD tape & reel option 00 u n its per reel L (TRU) long creepage distance for surface mount type package TRU tape & reel option 00 u n its per reel Recommended P ad L ayout for S urface M ount L ead F orm 2.54 2.54 1.5 1.9 2.54 2.54 1.5 1.9 8-pin SMD 8-pin L 8.3 2.54 10.7 2.54 1.Surface mount type 2.Long creepage distance for surface mount type U nit : mm

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER pin SMD Carrier T ape & Reel Direction of feed from reel TL Direction of feed from reel TR unit mm Quantity 1000 pcs/reel

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER pin L Carrier T ape & Reel 12.35±0.10 11.50±0.10 24.00±0.30 12.00±0.10 4.00±0.10 2.00±0.10 1.75±0.10 TLD Direction of feed from reel 24.40 30.40 Max. +0.20 -0.00 100±0.50 13.0±0.20 330 Max. Quantity 800 pcs/reel Unit:mm TOLERANCE ±0.2mm TRU Direction of feed from reel

Cosmo Electronics Corp. Document No. 9P51006 http://www.cosmo ic.com cosmo KP1510 Series 8PIN IGBT GATE DRIVE PHOTOCOUPLER Application N otice The content of datasheet is the guidance for product use only. cosmo takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., cosmo reserves the right to change the specification, characteris tics, data, materials, and structure of products without notice. Please contact with cosmo to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. cosmo has no liability and respon sibility to the damage caused by improper use of the products. cosmo products are intended to be designed for use in general electronics application list below: a. Personal c omputer b. OA machine c. Audio / Video d. Instrumentation e. Electrical a pplicat ion f. Measurement equipment g. Consumer electronics h. Telecommunication cosmo devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily inj ury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control This publication is the property of cosmo. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expres sed f r o m cosmo.