KP13B HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Features
*This product satisfies halogen free requirements defined as 900ppm maximum chlorine.900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine ・ RoHS compliant, Halogen-free product* Unit : mm ※ Please contact Hirose’s sales representative prior to adopting the products to in-vehicle devices.
1 Low profile 1.12mm height
2 Designed to release card from the rear of the socket
3 Incorrect card insertion prevention
4 Contact damage prevention
5 Easy inspection with exposed contact design
Push-Pull, Ultra Low Profile, nano SIM Card ConnectorKP13C Series Height 1.12ｍｍ Contact Resistance 100ｍΩ Max. Withstanding Voltage 500V AC for 1 minute Mold Resistance 1,000MΩ Min. (500V DC) Rated Current 0.5A Rated Voltage 10V AC Operating Temperature -30℃ to +85℃ Mating cycles 5,000 times 1.18mm The world’s Buckling prevention DesignDimensions World-Class Low Profile 1.12 mm Even if a finger touches contact, the double-contact design prevents contact damage. Main contact Sub contact Main contact Double-contact Single-contact Risk of contact roll-up is reduced with sub-contact Risk of deformation due to contact roll-up with a single contact design. 1.12 *This product satisfies halogen free requirements defined as 900ppm maximum chlorine.900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine ・ RoHS compliant, Halogen-free product* Unit : mm ※ Please contact Hirose’s sales representative prior to adopting the products to in-vehicle devices.
1 Low profile 1.12mm height Push-Pull, Ultra Low Profile, nano SIM Card ConnectorKP13CH Series Height 1.12ｍｍ Contact Resistance 100ｍΩ Max. Withstanding Voltage 500V AC for 1 minute Mold Resistance 1,000MΩ Min. (500V DC) Rated Current 0.5A Rated Voltage 10V AC Operating Temperature -30℃ to +85℃ Mating cycles 5,000 times 1.18mm The world’s Buckling prevention DesignDimensions Even if a finger touches contact, the double-contact design prevents contact damage. Main contact Sub contact Main contact Double-contact Single-contact Risk of contact roll-up is reduced with sub-contact Risk of deformation due to contact roll-up with a single contact design. 1.12 *This product satisfies halogen free requirements defined as 900ppm maximum chlorine.900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine ・ RoHS compliant, Halogen-free product* Unit : mm ※ Please contact Hirose’s sales representative prior to adopting the products to in-vehicle devices.
1 Easy to remove tray with eject pin
2 Buckling prevention eliminates contact damage
3 Enhanced retention force with dual side latches
4 Card detection switch
5 Easy inspection by exposed contact design
Bar-push Type with Tray, nano SIM Card ConnectorKP13TS Series Height 1.45ｍｍ Contact Resistance 100ｍΩ Max. Withstanding Voltage 500V AC for 1 minute Mold Resistance 1,000MΩ Min. (500V DC) Rated Current 0.5A Rated Voltage 10V AC Operating Temperature -30℃ to +85℃ Mating cycles 3,000 times 1.18 The w Buckling prevention designDimensions (Section A-A‘) Main Contact Tray Ejection Sub Contact A *Note : Tray is not included and should be prepared by customers. Dual-contact design allows the longer contact to reach tray first, and then the shorter contact smoothly moves along with it. When the tray passes on the main contact, there is no contact buckling. 1.45 *This product satisfies halogen free requirements defined as 900ppm maximum chlorine.900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine ・ RoHS compliant, Halogen-free product* Unit : mm ※ Please contact Hirose’s sales representative prior to adopting the products to in-vehicle devices.