KP10BH HIROSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

Unit : mm ※ Please contact Hirose’s sales representative prior to adopting the products to in-vehicle devices.

Push-Pull, Ultra Low Profile, micro SIM Card Connector Height 1.18mm

1 Space saving with ultra low profile

2 Reverse card insertion prevention design

3 Buckling prevention design

4 Card detection switch (Normally Open)

5 Easy inspection with exposed contact design

SpecificationsBuckling prevention designDimensions A micro SIM Adapter Extraction Contact tip Contact tip is designed to be lower than surface of mold Contact tip is designed to be lower than adapter When an adapter is inserted or extracted, it slides on the contact without buckling. Contact Resistance 100mΩ Max. Withstanding Voltage 500V AC for 1 minute Mold Resistance 1,000MΩ Min. (500V DC) Rated Current 0.5A Rated Voltage 10V AC Operating Temperature -30℃ to +85℃ Mating cycles 5,000 times ※ Please contact Hirose’s sales representative prior to adopting the products to in-vehicle devices. *This product satisfies halogen free requirements defined as 900ppm maximum chlorine.900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine ・ RoHS compliant, Halogen-free product* Unit : mm 1.18 Extraction

Push-Push, Ultra Low Profile, ｍicro SIM Card ConnectorKP10S Series Height 1.18mm The world 's lowest profile in its Class 1.18 mm* Buckling prevention designDimensions Contact Resistance 100mΩ Max. Withstanding Voltage 500V AC for 1 minute Mold Resistance 1,000MΩ Min. (500V DC) Rated Current 0.5A Rated Voltage 10V AC Operating Temperature -30℃ to +85℃ Mating cycles 5,000 times *This product satisfies halogen free requirements defined as 900ppm maximum chlorine.900ppm maximum bromine, and 1500ppm maximum total of chlorine and bromine * As push-push type micro SIM card connector as of Feb.2020 ⇒ Minimizes contact damage micro SIM Adapter Contact tip Section A-A’ Mold guide An adapter slides on the mold without contact buckling when removed. A Extraction ・ RoHS compliant, Halogen-free product* 1 Ultra Low profile 1.18mm height

2 Reverse card insertion protection

3 Buckling prevention eliminates contact damage

4 Card detection switch (Normally Close)

カード止め 1.18 Unit : mm ※ Please contact Hirose’s sales representative prior to adopting the products to in-vehicle devices.