KP0115ACAKG03CF-1SJB

KP0115ACAKG03CF-1FJB NKK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Audio/Video Pushbuttons Series KP Distinctive Characteristics Actual Size KP series offers a complete switch solution for all broadcast panel needs, including home keys and the custom rectangular switch/cap assembly. Distinct, long total travel of .177” (4.5mm) for KP01 or shorter stroke of .138 (3.5mm) for KP02. Available with red/green bicolor LED and custom RGB LEDs. The RGB LED full color spectrum in a switch package provides unlimited color combinations. Specially designed snap-in standoff for simple and secure PC board mounting and alignment. Unique actuation guide gives positive indication of circuit transfer as well as smooth and silent operation. (Patent pending). Choices of tactile, nontactile or tactile/audible actuation. Compact design with height of .906” (23.0mm) from PC board to top of cap. (Same height as IS series programmable SmartSwitch™.) Flat, sculptured or home key square caps in three common sizes for design flexibility in audio/video applications. Twin contacts with gold plating assure high reliability and long life of 5,000,000 operations minimum. Epoxy sealed terminals to lock out flux, dust, and other contaminants, plus standard PCB spacing of .100” (2.54mm).

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Audio/Video Pushbuttons Series KP General Specifications Electrical Capacity (Resistive Load) Low Level: 100mA maximum @ 12V DC Other Ratings Contact Resistance: 200 milliohms maximum Insulation Resistance: 100 megohms minimum @ 250V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum 1,500V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 5,000,000 operations minimum; 1,000,000 operations minimum for custom Rectangular Switch/Cap Assembly (at center of cap) Electrical Life: 5,000,000 operations minimum Nominal Operating Force: KP01: 1.9N maximum for Tactile & Nontactile models (at center of cap) KP02: 1.6N maximum for Tactile, Nontactile & Tactile/Audible models (at center of cap) Materials & Finishes Plunger/Upper Housing: Polyacetal Lower Housing: Glass fiber reinforced PBT Movable Contact: Stainless steel with gold plating Stationary Contacts: Gold over copper alloy Switch Terminals: Brass with tin plating Environmental Data Operating Temp Range: –25°C through +50°C (–13°F through +122°F) Humidity: 90-95% humidity for 240 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 51G (500m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Cap Installation Force : 50.0N maximum downward force on actuator PCB Processing Soldering: Wave Soldering. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications UL Recognition The KP Series pushbuttons have not been tested for UL recognition or CSA certification. or CSA Certification: These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Audio/Video Pushbuttons Series KP TYPICAL SWITCH ORDERING EXAMPLE CFN POLE & CIRCUIT 15A SPST OFF (ON) ( ) = Momentary Normally Open Contacts CONTACTS & TERMINALS G03 Gold Contacts and Straight PC Terminals; 100mA @ 12V DC 15A B G03 JBK HOUSING K Black only PLUNGERS A 9.2mm Plunger for 12.0mm Cap B 11.6mm Plunger for 15.0mm & 17.4mm Caps CAP COLORS JB Clear Lens & White Diffuser CAP TYPES F Flat S Sculptured T Home Key KP 01 ACTUATIONTRAVEL & FORCE 01 Stroke: 4.5mm (.177”) Actuation Force: 1.9N 02 Stroke: 3.5mm (.138”) Actuation Force: 1.6N 11.6mm Plunger and 15.0mm Sculptured Cap Clear Lens and White Diffuser SPST OFF-Momentary ON Circuit Normally Open Contacts DESCRIPTION FOR TYPICAL ORDERING EXAMPLE KP0115ANBKG03CF-2SJB Red/Green Bicolor LED Black Housing Gold Contacts with 100mA Rating Straight PC Terminals Nontactile Actuation LEDS CF Red/Green Bicolor RGB Red/Green/Blue (Custom) * See Note CAP SIZES 1 12.0mm Square 2 15.0mm Square 3 17.4mm Square See Note** Notes * Custom RGB LED Page L42 ** Custom Rectangular Cap Page L43 C Tactile N Nontactile C Tactile N Nontactile S Tactile/Audible

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Audio/Video Pushbuttons Series KP Plunger Position ( ) = Momentary Connected Terminals Throw & Switch Schematic Pole Model Normal Down Normal Down Note: Switch terminals “1” & “1a” are actually marked on the switch. SP KP0115A KP0215A OFF (ON) Normally Open 1-1a SPST POLE & CIRCUIT ACTUATION C Tactile KP01 or KP02 Gold Contacts Straight PC Terminals 100mA @ 12V DCG03 Black onlyKN Nontactile KP01 or KP02 HOUSING CONTACTS, TERMINALS, & RATING BICOLOR LED SPECIFICATIONS Amber can be achieved by simultaneous illumination of Red & Green. Tactile/Audible KP02 only S The electrical specifications shown are determined at a basic temperature of 25°C. Attention Electrostatic Sensitive Devices Red Green Unit Minimum Luminous Intensity IV 30 50 mcd Standard Luminous Intensity IV 60 115 mcd Forward Peak Current IFM (25 for amber) (22 for amber) mA Continuous Forward Current IF 20 20 mA Forward Voltage VF 2.1 3.5 V Power Peak Dissipation PD 75 100 mW Reverse Peak Voltage VRM 4 4 V Wavelength at Peak Emission λ 619 ~ 630 520 ~ 535 nm Current Reduction Rate Above 25°C ∆I F 0.38 0.32 mA/°C Ambient Temperature Range –25 ~ +50 °C CF Colors (+) COM Red Green (–) L2 (–) L1 LEDs are an integral part of the switch and are not avail- able separately. LED circuit is isolated and requires an external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. 1 (COM)

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Audio/Video Pushbuttons Series KP

1 Used on A Plunger

CAP TYPES & COLORS S AT3086 Home Key CapT AT3084 Flat Cap F AT3079 Sculptured Cap S AT3087 Home Key Cap T 12.0mm Square AT3078 Sculptured Cap AT3085 Flat Cap AT3080 Sculptured CapS AT3088 Home Key Cap T PLUNGERS A 9.2mm Plunger for 12.0mm Cap 9.2mm Plunger is designed with a narrower neck to hold the 12.0mm Cap. (9.2) .362 (6.4) .252 11.6mm Plunger for 15.0mm & 17.4mm Caps B 11.6mm Plunger is designed with a wider neck to hold both the 15.0mm and 17.4mm Caps. (11.6) .457 (6.4) .252 Clear Lens White Diffuser JB Lens & Diffuser Colors Available: Clear/White Materials & Finishes: Lens - Polycarbonate with glossy finish; Diffuser - Polycarbonate with textured finish Optional Protective Guard AT4170 available; contact factory. 2 15.0mm Square F 3 17.4mm Square Used on B Plunger Used on B Plunger (6.5) .256 (12.0) Sq .472 (6.5) .256 (12.0) Sq .472 (7.0) .276 (15.0) Sq .591 (7.0) .276 (15.0) Sq .591 (7.0) .276 (17.4) Sq .685 (7.0) .276 (17.4) Sq .685 (6.5) .256 (12.0) Sq .472 (2.6) Dia .102 (7.0) .276 (15.0) Sq .591 (2.6) Dia .102 (7.0) .276 (17.4) Sq .685 (2.6) Dia .102

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Audio/Video Pushbuttons Series KP TYPICAL SWITCH DIMENSIONS 12.0mm Square Cap 15.0mm Square Cap KP0115ACAKG03CF-1SJB KP0115ANBKG03CF-2SJB 17.4mm Square Cap KP0115ANBKG03CF-3SJB (12.0) Sq .472 (0.9) Dia Typ .035 (0.6) Dia Typ .024 (1.3) Dia Typ .051 (7.62) .300 (4.5) .177 (12.7) .500 (2.54) Typ .100 (12.7) .500 L2L1 1 1a C (0.9) Dia Typ .035 (0.6) Dia Typ .024 (1.3) Dia Typ .051 (7.62) .300 (4.5) .177 (12.7) .500 (2.54) Typ .100 (12.7) .500 L2L1 1 1a C (15.0) Sq .591 (7.62) .300 (0.6) Typ .024 (2.54) Typ .100 (12.7) .500 (15.0) Sq .591 L1L2 COM (6.5) .256 (3.6) .142 (0.3) .012 (4.5) .177 (12.7) .500 (0.45) Dia .018 (11.5) .453 (1.1) .043 (6.0) .236 (23.0) .906 (5.0) .197 (6.4) .252 (7.0) .276 (3.6) .142 (0.3) .012 (4.5) .177 (0.45) Dia .018 (12.7) .500 (11.5) .453 (4.5) .177 (23.0) .906 (6.0) .236 (1.1) .043 (6.4) .252 (7.62) .300 (0.6) Typ .024 (2.54) Typ .100 (12.7) .500 (15.0) Sq .591 L1L2 COM (17.4) Sq .685 (0.9) Dia Typ .035 (0.6) Dia Typ .024 (1.3) Dia Typ .051 (7.62) .300 (4.5) .177 (12.7) .500 (2.54) Typ .100 (12.7) .500 L2L1 1 1a C (11.5) .453 (1.1) .043 (6.0) .236 (23.0) .906 (4.5) .177 (7.0) .276 (3.6) .142 (0.3) .012 (4.5) .177 (12.7) .500 (0.45) Dia .018 (6.4) .252 (7.62) .300 (0.6) Typ .024 (2.54) Typ .100 (12.7) .500 (15.0) Sq .591 L1L2 COM

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Audio/Video Pushbuttons Series KP 12.0mm Square Cap with RGB LED 15.0mm & 17.4mm Square Caps with RGB LED Terminal Detail (12.7) .500 Dia .500 (12.7) (4.5) .028 Typ Typ .035 (0.7) Dia (0.9) Dia .177 .300 (7.62) .051 (1.3) Typ .150 (3.81) Typ .060 (1.52) G(-)R(-) B(-) (+) (12.0) Sq .472 .500 (5.0) .197.256 (6.5) (1.1) .043 (4.0)(23.0) .906 .157 (11.5) .453 Typ .008 (0.2) Sq .150 (3.81) (6.4) .252 .142 (3.6) (12.7) (0.3) .012 (4.5) .177 Sq .591 (15.0) (12.7) .500 .060 (1.52) Typ (7.62) .300 Typ(0.6) .024 See Terminal Detail (15.0) Sq .591 (17.4) Sq .685 (3.81) (4.5) .177 (1.1) (7.0) .276 .043 (4.0)(23.0) .906 .157 (11.5) .453 TypSq(0.2) .008 .150 (6.4) .252 .142 (3.6) (12.7) .500 .012 (0.3) G(-) R(-) B(-) Common Anode (+) Sq(15.0) .591 (12.7) .500 Typ(1.52) .060 (7.62) .300 1 (4.5) .177 Typ .024 (0.6) See Terminal Detail (12.7) .500 Dia .500 (12.7) (4.5) .028 Typ Typ .035 (0.7) Dia (0.9) Dia .177 .300 (7.62) .051 (1.3) Typ .150 (3.81) Typ .060 (1.52) G(-)R(-) B(-) (+) Terminal Detail KP0115ACAKG03RGB-1SJB KP0115ANBKG03RGB-3SJB 17.4mm Cap KP0115ANBKG03RGB-2SJB CUSTOM RGB The electrical specifications shown are determined at a basic temperature of 25°C. LEDs are an integral part of the switch and are not available separately. LED circuit is isolated and requires an external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement Section. Note: For applications that require white illumination, contact factory. Red Green Blue Unit Forward Peak Current IFM 30 30 30 mA Continuous Forward Current IF 20 15 15 mA Forward Voltage VF 2.0 3.3 3.4 V Power Peak Dissipation PD 40 80 80 mW Reverse Peak Voltage VRM 5 5 5 V Dominant Wavelength λd 625 525 470 nm Current Reduction Rate Above 25°C ∆IF 0.50 0.50 0.50 mA/°C Ambient Temperature Range –25 ~ +50 °C Red Green Blue Common Anode (+) RGBAttention Electrostatic Sensitive Devices Color 15.0mm Cap G(-) R(-) B(-) Common Anode (+) LED SPECIFICATIONS TYPICAL SWITCH DIMENSIONS

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Audio/Video Pushbuttons Series KP CUSTOM RECTANGULAR CAP ASSEMBLY Switch/Rectangular Cap Assembly LED Holder The electrical specifications shown are determined at a basic temperature of 25°C. Center LED is an integral part of the switch. LEDs are not sold separately. LED circuits are isolated and require an external power source. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by us- ing the formula in the Supplement Section. Red Unit Forward Peak Current IFM 30 mA Continuous Forward Current IF 20 mA Forward Voltage VF 2.0 V Reverse Peak Voltage VRM 4 V Dominant Wavelength λd 623 nm Current Reduction Rate Above 25°C ∆IF 0.32 mA/°C Ambient Temperature Range –25 ~ +50 °C Color LED Switch/Rectangular Cap assembly has 3 LEDs to achieve bright and even illumination. One LED (in center of switch bottom) is an integral part of the switch; the other 2 LEDs and 2 LED Holders are packaged separately. ASSEMBLY & INSTALLATION INSTRUCTIONS (12.7) .500 (3.1) .122 Dia (2.54) .100Cathode (4.8) .189 (5.9) .232 (10.4) .409 (6.7) .264 (+) (-) KP0115ACBKG03CJB for Tactile KP0115ANBKG03CJB for Nontactile Install LED into LED Holder (quantity 2). Solder LEDs and LED Holders into PCB. Solder switch into PCB making sure that the two outer LEDs and LED Holders clear the bot- tom side opening of the cap. (17.4) .685 (34.8) 1.370 PCB LED HolderLED Switch .500 (12.7) (4.5) .177 .300 (7.62) (22.86) .900(2.54) .100 (2.54) .100 .500 (12.7) (1.3) Dia Typ .051 (0.8) Dia Typ .031 (0.9) Dia Typ .035 Footprint Typ .018 (0.45) Sq(0.6) .024 Sq(15.0) .591 (12.7) .500 (4.5) .177 (7.62) .300 (0.3) .012 L–.500 .276 (7.0) (23.0) .906 (6.0) .236 .100 (2.54) (12.7) (3.6) .142 See below for complete assembly of switch, LEDs and LED holders. Contact factory for other LED colors. LED SPECIFICATIONS CAP ASSEMBLY DIMENSIONS

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Audio/Video Pushbuttons Series KP ASSEMBLY INSTRUCTIONS FOR SQUARE CAPS As shown in the accompanying illus- tration, the cap and plunger are designed with tabs and notches to assure proper orientation of the cap on the switch. Holding the switch tightly, pull the cap off the switch. Once the cap as- sembly is released from the plunger, the lens and diffuser can be separated. Pry up the lens with fingernail or flat tip screwdriver inserted at the step on the diffuser. Attention Electrostatic Sensitive Devices LEGENDS Lens Film Insert Diffuser STOP (10.5) Dia .413 (8.97) Dia .353 (0.76) Typ .030 (13.0) Dia .512 (11.48) Dia .452 (0.76) Typ .030 (15.3) Dia .602 (0.76) Typ .030 (13.77) Dia .542 (9.8) Sq .386 (8.28)Dia .326 (0.76) Typ .030 (0.5) R .020 (12.8) Sq .504 (11.28) Dia .444 (0.76) Typ .030 (0.5) R .020 After aligning notches with tabs, join the lens and diffuser. Hold the switch tightly without touching the terminals. Firmly press the cap onto the plunger by applying pressure from one side to the other until both are snapped together. Removal of Cap Assembly Installation or Cap Orientation & Separation of Lens & Diffuser Replacement of Cap Notch Tab Step Plunger Notches Cap Assembly Plunger Switch Sculptured Cap Lens Sculptured or Home Key Cap Film Inserts Flat Cap Lens Flat Cap Film Inserts (9.8) Sq .386 (8.28) Sq .326 (0.76) Typ .030 (0.5) R .020 (12.8) Sq .504 (11.28) Sq .444 (0.76) Typ .030 (0.5) R .020 (13.4) Sq .528 (11.88) Dia .468 (0.76) Typ .030 (0.5) R .020 (12.0) Sq .472 (9.8) Sq .386 (15.0) Sq .591 (12.8) Sq .504 (17.4) Sq .685 (13.4) Sq .528 Printing on Diffuser is not advisable. For other legend support options, customers may contact the factory or utilize the general information and basic specifications presented below. Recommended Methods: Laser Etch, Screen Print, or Pad Print on lens; Screen Print on film insert. Epoxy based ink is recommended. Shaded areas are suggested printable areas for Lens & Film Insert. Custom Rectangular Cap Lens Custom Rectangular Film Insert (13.77) .542 (0.91) Typ .036 (15.6) .614 (33.0) 1.299 (28.75) 1.132 (0.5) R .020 (2.125) Typ .084 Film Insert Material and Thickness: Clear Polyester; 4 mil (100µ) maximum thickness Easily create and submit your own legends using our new on-line Legend Maker. Visit www.nkkswitches.com (13.4) Sq .528 (11.88) Dia .468 (0.76) Typ .030 (0.5) R .020 (13.77) .542 (0.76) Typ .030 (15.3) .602 (30.28) 1.192 (28.75) 1.132 LM