KP01145201 SCHURTER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Power entry modules without line filter KP (FH) www.schurter.com/pg05 Connectors IEC Appliance Inlet C14 with Fuseholder 1- or 2-pole Inlet with fuseholder (5x20 mm) KPF Filter Module (not enclosed) Medical fuse drawer C14 70° C

Description

  • Panel Mount: Sandwich/rear-side - 2 Functions: Appliance Inlet Protection class I, Fuseholder for fuse-links 5 x 20 mm 1- or 2-pole - For PCB mounting - Alternative: version with line filter KPF; KPS Approvals - VDE License Number: 40008635 - UL License Number: E93617 - CSA License Number: 38456 Characteristics - Panel mount from rear or "sandwich" between top and bottom/side to side panels PCB mount with snap-in or screw-on <BREAK/> feet (self tapping screws Ø 3 x 8 mm) - All single elements are already wired - Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuse drawer can only be opened with the aid of a tool The fuseholder is accessible from the equipment front - Insulation cover on the rear-side - Qualified for use in equipment according IEC/EN 60950 Other versions on request - Solder terminals - Quick-connect terminals - For protection class II References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories T echnical Data Ratings IEC 10 A / 250 VAC; 50 Hz Ratings UL/CSA 10 A / 125 VAC; 60 Hz Dielectric Strength > 2.3 kVAC between L-N > 2.8 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Temp. -25 °C to 70 °C Degree of Protection from front side IP 40 acc. to IEC 60529 Protection Class Suitable for appliances with protection class 1 acc. to IEC 61140 Terminal For PCB mounting Quick connect termi- nals 4.8 x 0.8 mm Solder terminal on request Panel Thickness s Snap-in: 1.5/2/2.5/3 mm Material: Housing Thermoplastic, black, UL 94V-0 Appliance Inlet C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 Fuseholder 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm Rated Power Acceptance @ Ta 23 °C 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Power Acceptance @ Ta > 23°C Admissible power acceptance at hig- her ambient temperature see derating curves

Power entry modules without line filterKP (FH) www.schurter.com/pg05 Connectors Dimensions 56.1 mm Screw on PCB mounting 52.1 22 56.1 ø 5.91.1 1.3 20.2 6.2 0.8 1.31.1 2.5 18.5 36.54.5 A R 2 2 2 27.8 31.2 50.1 53.34 S ±0.1 A = for PCB-thickness 1.2/1.6/2.0/2.4 mm Additional quick connect terminal 4.8 x 0.8 mm Snap-in mounting 52.1 22 56.1 ø 5.91.1 1.3 20.2 6.2 0.8 1.31.1 4.5 18.5 36.54.5 1.6 R 2 2 2 27.8 31.2 50.1 53.34 S ±0.1 -0.1 ±0.1 2.9 Additional quick connect terminal 4.8 x 0.8 mm s = panel thickness For 2-pole inlet/switch, 2-pole inlet fuseholder and inlet/outlet X±0.1 10.167.62 27.94 25.4 13.97 53.34 (16.45)S ±0.1 3.82 D1 D2 D2 1.6 +0.1 0 D1 7.55 5.08 for combinations: inlet/switch 1-pole Inlet/ fuseholder 1-pole 10.1610.1625.41.6 +0.1 S and X see mounting holes Mounting holes for backside moun- ting 52.4 32.3 ±0.1 ±0.1 Sandwich mounting holes X 32.3 ±0.1 ±0.1 18.5 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 Sandwich mounting holes X 32.3 ±0.1 ±0.1 X = 48.4 at S = 1.5 and 2.5 X = 50.4 at S = 2.0 and 3.0 Dimensions Stable snap feet requires minimal insertion force Module must lay flat on the PCB when soldering Screw-on mount uses self-tapping screws

Power entry modules without line filter KP (FH) www.schurter.com/pg05 Connectors Insertion from behind "Sandwich" mounting with split enclosure panels Other dimensions as for 2-poles d1 = 6 ± 0.05 for (snap-in) d1 = 3.6 (screw-on) d2 = 2 ± 0.1 (screw-on) Dimensions without tolerance: Diagrams Inlet with fuseholder (5 x 20 mm) Variants Panel mounting Panel Thickness s [mm] PCB [mm] Line Switch Fuseholder Connector Order Number Snap-in 2 1.6 - 1-pole - KP01.1412.01 Snap-in 2 1.6 - 2-pole - KP01.1312.01 Snap-in 3 1.6 - 1-pole - KP01.1413.01 Snap-in 3 1.6 - 2-pole - KP01.1313.01 Type KP without cover: KP01.XXXX.XX90 Ground Terminal with solder pin: KP01.XXXX.X3XX Packaging unit 50 Pcs Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to KP (FH)

Power entry modules without line filterKP (FH) www.schurter.com/pg05 Connectors Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to KP (FH) ... Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to KP (FH) ... The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments.