KDZ8.2B

KDZ7.5B_1 ROHM | Alldatasheet

Document overview

• Manufacturer or author: ROHM CO., LTD.
• PDF pages: 5

Technical content

KDZ7.5B Diodes Rev.F 1/4 Zener diode KDZ7.5B zApplications zDimensions (Unit : mm) zLand size figure (Unit : mm) Voltage regulation zFeatures 1) Small power mold type. (PMDU) 2) High ESD tolerance zConstruction Silicon epitaxial planar zStructure zTaping dimensions (Unit : mm) zAbsolute maximum ratings (Ta=25qC) 㪧㪤㪛㪬 㪈㪅㪉 㪊㪅㪇㪌 㪇㪅㪏㪌 㪋㪅㪇㫧㪇㪅㪈 㪉㪅㪇㫧㪇㪅㪇㪌 㱢㪈㪅㪌㪌㫧㪇㪅㪇㪌 㪈㪅㪏㪈㫧㪇㪅㪈 㪋㪅㪇㫧㪇㪅㪈 㱢㪈㪅㪇㫧㪇㪅㪈 㪊㪅㪌㫧㪇㪅㪇㪌 㪈㪅㪎㪌㫧㪇㪅㪈 㪏㪅㪇㫧㪇㪅㪉 㪇㪅㪉㪌㫧㪇㪅㪇㪌 㪈㪅㪌㪤㪘㪯 㪊㪅㪎㪈㫧㪇㪅㪈 Symbol Unit Pm W Tj 㷄 Tstg 㷄 Limits 150 -55 to +150 1000 Parameter Junction temperature Storage temperature Power dissipation 㪩㪦㪟㪤㩷㪑㩷㪧㪤㪛㪬 㪡㪜㪛㪜㪚㩷㪑㪪㪦㪛㪄㪈㪉㪊 㪤㪸㫅㫌㪽㪸㪺㫋㫌㫉㪼㩷㪛㪸㫋㪼 㪇㪅㪐㫧㪇㪅㪈 㪈㪅㪍㫧㪇㪅㪈 㪉㪅㪍㫧㪇㪅㪈 㪊㪅㪌㫧㪇㪅㪉 㪇㪅㪏㫧㪇㪅㪈 㪇㪅㪈㫧㪇㪅㪈 䇭䇭䇭㩷㪇㪅㪇㪌 㽲 EX. KDZ10B

KDZ7.5B Diodes Rev.F 2/4 zElectrical characteristics (Ta=25qC) zMarking (TYPE NO.) 㪫㪰㪧㪜䇭㪥㪦㪅 㪫㪰㪧㪜䇭㪥㪦㪅 KDZ̛3.6B 㪞㪙 KDZ̛12B 㪭㪙 KDZ̛3.9B 㪟㪙 KDZ̛13B 㪮㪙 KDZ̛4.3B 㪡㪙 KDZ̛15B 㪯㪙 KDZ̛4.7B 㪢㪙 KDZ̛16B 㪰㪙 KDZ̛5.1B 㪣㪙 KDZ̛18B 㪱㪙 KDZ̛5.6B 㪤㪙 KDZ̛20B 㪘㪛 KDZ̛6.2B 㪥㪙 KDZ̛22B 㪙㪛 KDZ̛6.8B 㪧㪙 KDZ̛24B 㪚㪛 KDZ̛7.5B 㪨㪙 KDZ̛27B 㪛㪛 KDZ̛8.2B 㪩㪙 KDZ̛30B 㪜㪛 KDZ̛9.1B 㪪㪙 KDZ̛33B 㪝㪛 KDZ̛10B 㪫㪙 KDZ̛36B 㪞㪛 KDZ̛11B 㪬㪙 㪫㪰㪧㪜 TYPE MIN. 㪫㪰㪧㪅 MAX. Iz(mA) MAX. VR(V) KDZ 10B 10.000 10.310 11.200 40 10 7.0 KDZ 11B 11.000 11.510 12.300 20 10 8.0 KDZ 12B 12.000 12.500 13.500 20 10 9.0 KDZ 13B 13.300 13.820 15.000 20 10 10.0 KDZ 15B 14.700 15.350 16.500 20 10 11.0 KDZ 16B 16.200 16.860 18.300 20 10 12.0 KDZ 18B 18.000 19.000 20.300 20 10 13.0 KDZ 20B 20.000 20.820 22.400 20 10 15.0 KDZ 22B 22.000 23.850 24.500 10 10 17.0 KDZ 24B 24.000 25.310 27.600 10 10 19.0 KDZ 27B 27.000 28.700 30.800 10 10 21.0 KDZ 30B 30.000 31.570 34.000 10 10 23.0 KDZ 33B 33.000 34.950 37.000 10 10 25.0 KDZ 36B 36.000 39.240 40.000 10 10 27.0 㶎The Zener voltage (Vz) is measured 40ms after power is supplied. TYP. Symbol Zener voltage䋺Vz(V) Reverse current䋺IR(㱘㪘)

KDZ7.5B Diodes Rev.F 3/4 㪧㪦㪮㪜㪩㩷㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪻㩿㫄㪮㪀 㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀 㪧㪩㪪㪤㪄㪫㪠㪤㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿䋦㪆㷄㪀 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀 㱏㫑㪄㪭㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪫㪠㪤㪜㪑㫋㩿㫊㪀 㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪫㪩㪘㪥㪪㪠㪜㪥㪫 㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪩㪜㪭㪜㪩㪪㪜㩷㩷㩷㪪㪬㪩㪞㪜㩷㪤㪘㪯㪠㪤㪬㪤 㪧㪦㪮㪜㪩㪑㪧㪩㪪㪤㩿㪮㪀 㪇 㪉㪇㪇 㪋㪇㪇 㪍㪇㪇 㪏㪇㪇 㪈㪇㪇㪇 㪈㪉㪇㪇 㪇 㪉㪌 㪌㪇 㪎㪌 㪈㪇㪇 㪈㪉㪌 㪈㪌㪇 㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇 㪈㪇㪇㪇㪇 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㫋 㪧㪩㪪㪤 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪇 㪌 㪈㪇 㪈㪌 㪉㪇 㪉㪌 㪊㪇 㪊㪌 㪋㪇 㪋㪌 㪊㪅㪍 㪉㪋㪉㪇㪈㪏㪈㪍㪈㪌㪈㪊㪈㪉㪈㪈㪈㪇㪐㪅㪈㪏㪅㪉㪎㪅㪌㪌㪅㪍 㪍㪅㪏㪍㪅㪉㪌㪅㪈 㪋㪅㪎 㪋㪅㪊 㪊㪅㪐 㪊㪍㪊㪇㪉㪎 㪊㪊㪉㪉 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀 㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪄㪇㪅㪇㪏 㪄㪇㪅㪇㪍 㪄㪇㪅㪇㪋 㪄㪇㪅㪇㪉 㪇 㪇㪅㪇㪉 㪇㪅㪇㪋 㪇㪅㪇㪍 㪇㪅㪇㪏 㪇㪅㪈 㪇㪅㪈㪉 㪇 㪈 㪇㪉 㪇㪊 㪇㪋 㪇 㪄㪌 㪇 㪌 㪈㪇 㪈㪌 㪉㪇 㪉㪌 㪊㪇 㪊㪌 㪋㪇 㪘㪤㪙㪠㪜㪥㪫㩷㪫㪜㪤㪧㪜㪩㪘㪫㪬㪩㪜㪑㪫㪸㩿㷄㪀 㪧㪻㪄㪫㪸䇭㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿㫄㪭㪆㷄㪀 㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇 㪩㫋㪿㩿㫁㪄㪸㪀 㪩㫋㪿㩿㫁㪄㪺㪀 㪈㫄㫊 㪠㪤㪔㪈㪇㫄㪘 㪠㪝㪔㪈㪇㪇㫄㪘 㪊㪇㪇㫌㫊 㫋㫀㫄㪼 Mounted on epoxy board

KDZ7.5B Diodes Rev.F 4/4 zElectrical characteristic curves (Ta=25qC) 㪈㪇㪇 㪈㪇㪇㪇 㪈㪇㪇㪇㪇 㪇㪈㪉㪊㪋 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀 㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀 㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀 㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪭㫑㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀 㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀 㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥 㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀 㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀 㪱㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪 㪛㪰㪥㪘㪤㪠㪚㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪱㫑㩿㱅㪀 㪽㪔㪈㪤㪟䌺 㪇㪅㪇㪇㪇㪈 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇 㪇㪈㪉㪊㪋 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪎㪌㷄 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪄㪉㪌㷄 㪫㪸㪔㪈㪌㪇㷄 㪇 㪇㪅㪈 㪇㪅㪉 㪇㪅㪊 㪇㪅㪋 㪇㪅㪌 㪇㪅㪍 㪇㪅㪎 㪇㪅㪏 㪇㪅㪐 㪈 㪫㪸㪔㪉㪌㷄 㪭㪩㪔㪋㪅㪇㪭 㫅㪔㪊㪇㫇㪺㫊 㪘㪭㪜㪑㪇㪅㪈㪌㪇㫅㪘 㪌㪌㪇 㪌㪍㪇 㪌㪎㪇 㪌㪏㪇 㪌㪐㪇 㪍㪇㪇 㪍㪈㪇 㪍㪉㪇 㪍㪊㪇 㪍㪋㪇 㪍㪌㪇 㪘㪭㪜㪑㪌㪏㪉㪅㪈㫇㪝 㪫㪸㪔㪉㪌㷄 㪽㪔㪈㪤㪟㫑 㪭㪩㪔㪇㪭 㫅㪔㪈㪇㫇㪺㫊 㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪍㪎㪏㪐 㪈 㪇 㪫㪸㪔㪄㪉㪌㷄 㪫㪸㪔㪎㪌㷄 㪫㪸㪔㪈㪉㪌㷄 㪫㪸㪔㪉㪌㷄 㪫㪸㪔㪈㪌㪇㷄 㪇㪅㪈 㪈 㪈㪇 㪈㪇㪇 㪇㪅㪈 㪈 㪈㪇 㪎㪅㪎 㪎㪅㪏 㪎㪅㪐 㪏 㪏㪅㪈 㪏㪅㪉 㪘㪭㪜㪑㪎㪅㪏㪏㪐㪭 㪫㪸㪔㪉㪌㷄 㪠㪱㪔㪋㪇㫄㪘 㫅㪔㪊㪇㫇㪺㫊 㪜㪣㪜㪚㪫㪩㪦㪪㪫㪘㪫㪠㪚 㪛㪠㪪㪚㪟㪘㪩㪞㪜㩷㪫㪜㪪㪫㩷㪜㪪㪛㩿㪢㪭㪀 㪜㪪㪛㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧 㪇 㪌 㪈㪇 㪈㪌 㪉㪇 㪉㪌 㪊㪇 㪚㪔㪉㪇㪇㫇㪝 㪩㪔㪇㱅 㪚㪔㪈㪇㪇㫇㪝 㪩㪔㪈㪅㪌㫂㱅 㪚㪔㪈㪌㪇㫇㪝 㪩㪔㪊㪊㪇㱅 No break at 30kV

No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. Appendix1-Rev2.0 Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co.jpwww.rohm.com Copyright © 2008 ROHM CO.,LTD. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog.

21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121

FAX : +81-75-315-0172 Appendix