KDIS-A1A11-S/Q

KDIS MSYSTEM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

MODEL: KDIS KDIS SPECIFICATIONS ES-3643 Rev.4 Page 1/3 http://www.m-system.co.jp/ Plug-in Signal Conditioners K-UNIT DIGITAL DIVIDER Functions & Features

• Accepting two DC inputs and providing a standard process signal proportional to the division of the two signals
• Isolation up to 2000 V AC
• High-density mounting Typical Applications
• Air-fuel ratio control
• Mixing ratio control of two materials (1.97) 123 (4.84) (3.15) mm (inch) K-UNIT MODEL: KDIS–[1][2][3]–[4][5]

ORDERING INFORMATION

• Code number: KDIS-[1][2][3]-[4][5] Specify a code from below for each of [1] through [5]. (e.g. KDIS-6AA-B/Q)
• Special input and output ranges (For codes Z & 0)
• Specify the specification for option code /Q (e.g. /C01/S01)
• Parameters (e.g. K1 = 0.50, K2 = 0.90) [1] INPUT 1 Current A: 4 – 20 mA DC (Input resistance 250 Ω) A1: 4 – 20 mA DC (Input resistance 50 Ω) B: 2 – 10 mA DC (Input resistance 500 Ω) C: 1 – 5 mA DC (Input resistance 1000 Ω) D: 0 – 20 mA DC (Input resistance 50 Ω) E: 0 – 16 mA DC (Input resistance 62.5 Ω) F: 0 – 10 mA DC (Input resistance 100 Ω) G: 0 – 1 mA DC (Input resistance 1000 Ω) H: 10 – 50 mA DC (Input resistance 100 Ω) K: 0 – 100 μA DC (Input resistance 1000 Ω) GW: -1 – +1 mA DC (Input resistance 1000 Ω) FW: -10 – +10 mA DC (Input resistance 100 Ω) Z: Specify current (See INPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Input resistance 10 kΩ min.) 2: 0 – 100 mV DC (Input resistance 100 kΩ min.) 3: 0 – 1 V DC (Input resistance 1 MΩ min.) 4: 0 – 10 V DC (Input resistance 1 MΩ min.) 5: 0 – 5 V DC (Input resistance 1 MΩ min.) 6: 1 – 5 V DC (Input resistance 1 MΩ min.) 4W: -10 – +10 V DC (Input resistance 1 MΩ min.) 5W: -5 – +5 V DC (Input resistance 1 MΩ min.) 0: Specify voltage (See INPUT SPECIFICATIONS) [2] INPUT 2 Same range availability as Input 1 [3] OUTPUT Current A: 4 – 20 mA DC (Load resistance 750 Ω max.) B: 2 – 10 mA DC (Load resistance 1500 Ω max.) C: 1 – 5 mA DC (Load resistance 3000 Ω max.) D: 0 – 20 mA DC (Load resistance 750 Ω max.) E: 0 – 16 mA DC (Load resistance 900 Ω max.) F: 0 – 10 mA DC (Load resistance 1500 Ω max.) G: 0 – 1 mA DC (Load resistance 15 kΩ max.) Z: Specify current (See OUTPUT SPECIFICATIONS) Voltage 1: 0 – 10 mV DC (Load resistance 10 kΩ min.) 2: 0 – 100 mV DC (Load resistance 100 kΩ min.) 3: 0 – 1 V DC (Load resistance 100 Ω min.) 4: 0 – 10 V DC (Load resistance 1000 Ω min.) 5: 0 – 5 V DC (Load resistance 500 Ω min.) 6: 1 – 5 V DC (Load resistance 500 Ω min.) 4W: -10 – +10 V DC (Load resistance 2000 Ω min.) 5W: -5 – +5 V DC (Load resistance 1000 Ω min.) 0: Specify voltage (See OUTPUT SPECIFICATIONS) [4] POWER INPUT AC Power B: 100 V AC C: 110 V AC D: 115 V AC F: 120 V AC G: 200 V AC H: 220 V AC J: 240 V AC DC Power S: 12 V DC R: 24 V DC

MODEL: KDIS KDIS SPECIFICATIONS ES-3643 Rev.4 Page 2/3 http://www.m-system.co.jp/ [5] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel GENERAL SPECIFICATIONS Construction: Plug-in Connection: M3.5 screw terminals Screw terminal: Chromated steel (standard) or stainless steel Housing material: Flame-resistant resin (black) Isolation: Input 1 or input 2 to output to power (Negative sides of the input 1 and 2 must be of the same potential.) Overrange output: 0 to 115 % at 1 – 5 V Zero adjustment: -5 to +5 % (front) Span adjustment: 95 to 105 % (front) Equation: Output = (K1 × Input 1) ÷ (K2 × Input 2) K1, K2: 0.10 – 1.15 (parameters) Input 1: 0 – (115 ÷ (K1 ÷ K2)) % with (K1 ÷ K2) ≥ 1 Forcibly limited to 0 % or (115 ÷(K1 ÷ K2)) % with overrange. 0 – 115 % with (K1 ÷ K2) < 1 Forcibly limited to 0 % or 115 % with overrange. Input 2: 5 – 115 %; forcibly limited to 5 % or 115 % with overrange. Output: 0 – 120 % (approx.); forcibly limited to 0 % or 120 % with overrange. K1, K2 are ex-factory specified. Example: K1 K2 INP1 INP2 OUT 0.50 1.00 100 % 50 % 100 % 0.50 1.00 50 % 50 % 50 % INPUT SPECIFICATIONS ■ DC Current: Shunt resistor attached to the input terminals (0.5 W) Specify input resistance value for code Z. ■ DC Voltage: -300 – +300 V DC Minimum span: 10 mV Offset: Max. 1.5 times span Input resistance Span 10 – 100 mV : ≥ 10 kΩ Span 0.1 – 1 V : ≥ 100 kΩ Span ≥ 1 V : ≥ 1 MΩ OUTPUT SPECIFICATIONS ■ DC Current: 0 – 20 mA DC Minimum span: 1 mA Offset: Max. 1.5 times span Load resistance: Output drive 15 V max. ■ DC Voltage: -10 – +12 V DC Minimum span: 5 mV Offset: Max. 1.5 times span Load resistance: Output drive 10 mA max.; 5 mA for negative voltage output; at ≥ 0.5 V INSTALLATION Power input

• AC: Operational voltage range: rating ±10 %, 50/60 ±2 Hz, approx. 3 VA
• DC: Operational voltage range: rating ±10 %, ripple 10 %p-p max., approx. 2 W (80 mA at 24 V) Operating temperature: -5 to +55°C (23 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Surface or DIN rail Weight: 350 g (0.77 lb) PERFORMANCE in percentage of span Accuracy: ±1.0 % (input 2 ≥ 20 %) Temp. coefficient: ± 0.03 % /°C (± 0.02 %/°F) (input 2 ≥ 20 %) Response time: ≤ 0.5 sec. (0 – 90 %) Line voltage effect: ±0.1 % over voltage range Insulation resistance: ≥ 100 MΩ with 500 V DC Dielectric strength: 2000 V AC @1 minute (input 1 or input 2 to output to power to ground)

MODEL: KDIS KDIS SPECIFICATIONS ES-3643 Rev.4 Page 3/3 http://www.m-system.co.jp/ EXTERNAL DIMENSIONS unit: mm (inch) 3456 2187 80 (3.15) 80 (3.15) (.79) 40 (1 .57) 50 (1 .97) 7 .8 (.31) CLAMP (top & bottom) DIN RAIL 35mm wide2–4.5 (.18) dia. MTG HOLE 15 (.59) deep 8–M3.5 SCREW

• When mounting, no extra space is needed between units. TERMINAL ASSIGNMENTS unit: mm (inch) 2187 12 (.47) INPUT RESISTOR (model: REM) Input shunt resistor attached for current input. SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Isolation Base Socket *Input shunt resistor attached for current inputs. Output Driver OUTPUT U(+) V(–) POWER INPUT 1 R * INPUT 2 R * Input Circuit Digital Computation Input Circuit SZ Specifications are subject to change without notice.