MCKDE1204PKB1 MULTICOMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Micro Slim-6mm Deep and Standard Axial Flow Fans - Low Voltage dc Page 1 26/05/05 V1.0 Specifications: Motor : Patented brushless DC motor design. Frame : Injection moulded non-flammable black thermoplastic. Impeller : Injection moulded non-flammable black thermoplastic. Bearing : Precision, life-lubricated ball bearings system. Insulation : Class E integral ground system rated at 100°C. Insulation resistance : More than 500M Ohm between internal stator and leadwire (+) measured by 500V dc. Dielectric strength : 600V ac for one minute. Safety protection : Electronic locked rotor protection. Operating temperature : -10°C to +70°C. Storage temperature : -40°C to +80°C. Operating voltage Standard : 12V and 24V. Micro slim : 5V dc. Operating life Standard : >50,000 hours at 40°C. Micro slim : 50,000 hours. AWG for standard : 22 AWG. Features:

  • 25, 30 and 40mm micro slim fans.
  • Ideal for precision cooling or compact equipment.
  • Patented single coil brushless 8 pole motor.
  • Locked rotor protection.
  • Precision ball bearings. Features:
  • Low cost, low noise, brushless DC fans.
  • Housing and impeller made from UL94V-0 thermoplastic.
  • Fitted with ball bearings and 300mm, 22 AWG lead wire. Micro Slim - 6mm Deep Standard

Micro Slim-6mm Deep and Standard Axial Flow Fans - Low Voltage dc Page 2 26/05/05 V1.0 The Advantages of Patented Motor Design: 1. Allows creation of the smallest and thinnest brushless DC Fan Motor in the world. 2. The bobbin design protects the winding coils from abrasion and damage during assembly. 3. Ease of manufacture and assembly providing low cost and high reliability. 4. Superior dielectric strength due to the unique wound bobbin construction of the Multicomp design. 5. Increased performance to size ratio due to smaller hub design which allows for larger fan blades. 6. Increased torque through more poles to reduce the power consumption of fan motor. Example: Dual poles can be augmented into four, six and eight poles respectively. 7. The notches in the bobbin separate the 3 coil wires which adjoin v0, v1 and v2 to the circuit board provided the protection from a short circuit design. 8. Ideal for precision cooling or compact equipment.

Micro Slim-6mm Deep and Standard Axial Flow Fans - Low Voltage dc Page 3 26/05/05 V1.0 Product Guide Dimensions:

  • 15.9 to 22.1 CFM.
  • 12 and 24V dc (nominal).
  • Patented single-coil brushless 4 poles DC motor design.
  • Locked rotor protection.
  • Polarity protected.
  • Precision ball bearing system.
  • 26 AWG lead wire. "+" Red and "-" Black. Dimensions:
  • 29.4 to 42.5 CFM.
  • 12 and 24V dc (nominal).
  • Patented single-coil brushless DC motor design.
  • Available with 4 poles or 6 poles motor.
  • Locked rotor protection.
  • Polarity protected.
  • Precision ball bearing system.
  • 24 AWG lead wire. "+" Red and "-" Black. Performance Performance 80 x 80 x 25mm 60 x 60 x 25mm
  • 5.2 to 7.0 CFM.
  • 5 and 12V dc (nominal).
  • Patented single-coil brushless 4 poles DC motor design.
  • Locked rotor protection.
  • Low power consumption.
  • Polarity protected.
  • Precision ball bearing system.
  • 26 AWG lead wire. "+" Red and "-" Black. 40 x 40 x 20mm PerformanceDimensions:

Micro Slim-6mm Deep and Standard Axial Flow Fans - Low Voltage dc Page 4 26/05/05 V1.0 Height Width Depth Voltage (V dc) Power (Watts) Air Flow Noise (dBA at 1m) Cut-out Diameter Fix centres Fix Centres Diameter Part Number* cu ft/min ltrs/sec 40 20 12 1.00 7.3 3.4 26 38 32.0 x 32.0 4.3 MCKDE1204PKB1 24 0.96 6.2 2.9 25 MVKDE2404PKB2 12 1.40 18.0 8.4 31 58 50.0 x 50.0 MCKDE1206PTB2 24 1.90 MCKDE2406PTB2 12 2.00 35.0 16.5 32.5 77 71.5 x 71.5 MCKDE1208PTB2-6 24 3.12 32.0 MCKDE2408PTB2-6 12 2.10 45.0 21.2 34 89 82.5 x 82.5 MCKDE1209PTB2-6 24 2.90 MCKDE2409PTB2-6 119 12 3.60 80.0 37.7 116 104.8 x 104.8 MCKDE1212PTB2-6 24 4.80 MCKDE2412PTB2-6 12 6.80 108.0 50.9 MCKDE1212PMB1-6A 24 5.50 98.0 46.2 36 MCKDE2412PMB2-6A Dimensions : Millimetres (Unless specified) Specification Table - Standard *Suffix with ‘-6’ : Motor with six poles. Suffix with ‘-6A’ : Motor with six poles protected by IC. Dimensions:

  • 39 to 51 CFM.
  • 12 and 24V dc (nominal).
  • Patented single-coil brushless DC motor design.
  • Locked rotor protection.
  • Available with 4 poles or 6 poles motor.
  • Polarity protected.
  • Precision ball bearing system.
  • 24 AWG lead wire. "+" Red and "-" Black. 92 x 92 x 25mm Performance Input

Micro Slim-6mm Deep and Standard Axial Flow Fans - Low Voltage dc Page 5 26/05/05 V1.0 Specification Table - Micro Slim Height Width Depth Type Power Watts Airflow Noise (dBA at 1m) Voltage (V dc) Part Number* cu ft/min ltrs/sec Standard, 25mm 0.60 1.60 0.76 29 KDE502PEB1-8 Low noise, 25mm 0.40 1.20 0.57 21 KD0502PEB2-8 Super low noise, 25mm 0.25 0.75 0.35 11 KD0502PEB3-8 Standard, 30mm 0.65 3.00 1.43 25 KD0503PEB1-8 Low noise, 30mm 0.45 2.40 1.15 20 KD0503PEB2-8 Super low noise, 30mm 0.28 1.90 0.90 13 KD0503PEB3-8 Standard, 40mm 0.70 5.50 2.60 26 KD0504PEB1-8 Low noise, 40mm 0.50 4.35 2.07 22 KD0504PEB2-8 Super low noise, 40mm 0.30 3.5 1.66 16 KD0504PEB3-8 *Suffix with ‘-8’ : Motor with eight poles. Dimensions : Millimetres (Unless specified)

For enquiries from all other markets Micro Slim-6mm Deep and Standard Axial Flow Fans - Low Voltage dc Page 6 26/05/05 V1.0 Notes: International Sales Offices: AUSTRALIA– Farnell InOne Tel No: ++ 61 2 9645 8888 Fax No: ++ 61 2 9644 7898 FRANCE – Farnell InOne Tel No: ++ 33 474 68 99 99 Fax No: ++ 33 474 68 99 90 NORWAY– Farnell InOne Tel No: ++ 45 44 53 66 66 Fax No: ++ 45 44 53 66 02 AUSTRIA – Farnell InOne Tel No: ++ 43 662 2180 680 Fax No: ++ 43 662 2180 670 GERMANY – Farnell InOne Tel No: ++ 49 89 61 39 39 39 Fax No: ++ 49 89 613 59 01 PORTUGAL– Farnell InOne Tel No: ++ 34 93 475 8804 Fax No: ++ 34 93 474 5288 ESTONIA – Farnell InOne Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 NETHERLANDS– Farnell InOne Tel No: ++ 31 30 241 7373 Fax No: ++ 31 30 241 7333 UK – Farnell InOne Tel No: ++ 44 8701 200 200 Fax No: ++ 44 8701 200 201 SINGAPORE– Farnell-Newark InOne Tel No: ++ 65 6788 0200 Fax No: ++ 65 6788 0300 HONG KONG– Farnell-Newark InOne Tel No: ++ 852 2268 9888 Fax No: ++ 852 2268 9899 BELGIUM – Farnell InOne Tel No: ++ 32 3 475 2810 Fax No: ++ 32 3 227 3648 BRAZIL – Farnell-Newark InOne Tel No: ++ 55 11 4066 9400 Fax No: ++ 55 11 4066 9410 IRELAND – Farnell InOne Tel No: ++ 353 1 830 9277 Fax No: ++ 353 1 830 9016 SPAIN– Farnell InOne Tel No: ++ 34 93 475 8805 Fax No: ++ 34 93 474 5107 CHINA – Farnell-Newark InOne Tel No: ++86 10 6238 5152 Fax No: ++86 10 6238 5022 ITALY– Farnell InOne Tel No: ++ 39 02 93 995 200 Fax No: ++ 39 02 93 995 300 SWEDEN – Farnell InOne Tel No: ++ 46 8 730 50 00 Fax No: ++ 46 8 83 52 62 MALAYSIA– Farnell-Newark InOne Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 SWITZERLAND– Farnell InOne Tel No: ++ 41 1 204 64 64 Fax No: ++ 41 1 204 64 54 DENMARK – Farnell InOne Tel No: ++ 45 44 53 66 44 Fax No: ++ 45 44 53 66 06 UK – CPC ++ 44 8701 202 530 ++ 44 8701 202 531 UK – BuckHickman InOne ++ 44 8450 510 150 ++ 44 8450 510 130 NEW ZEALAND– Farnell InOne Tel No: ++ 64 9 357 0646 Fax No: ++ 64 9 357 0656 EXPORT – Farnell InOne Tel No: ++ 44 8701 200 208 Fax No: ++ 44 8701 200 209 export FINLAND – Farnell InOne Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group w as aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2004. http://www.farnellinone.com http://www.buckhickmaninone.com http://www.cpc.co.uk