KBP005M YEASHIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
http://www.yeashin.com 1 REV.02 20120305 KBP005M THRU KBP10M GLASS PASSIVATED SINGLE-PHASE RECTIFIER BRIDGE Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5 Amperes
FEATURES
‧Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ‧This series is UL listed under Recognized Component Index, file number E54214 ‧Glass passivated chip junctions ‧High surge current capability ‧Ideal for printed circuit board ‧High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.3kg) tension ‧High temperature soldering : 260 O C / 10 seconds at terminals ‧Pb free product at available : 99% Sn above meet RoHS environment substance directive request MECHANICAL DATA ‧Case: Molded plastic body over passivated junctions ‧Terminals: Plated lead solderable per MIL-STD-750, Method 2026 ‧Polarity: Polarity symbols marked on case ‧Mounting position: Any ‧Weight: 0.06 ounce, 1.7 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS KBP 005M KBP 01M KBP 02M KBP 04M KBP 06M KBP 08M KBP 10M UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum av erage for ward output re ctified current at TA=55°C I(AV) 1.5 Amps Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) TJ=150°C IFSM 50.0 30.0 Amps Rating for fusing (t < 8.3ms) I2t 10.0 A2sec Maximum instantaneous forward voltage drop at 1.0A per leg VF 1.0 Volts Maximum DC reverse current TA=25°C at rated DC blocking voltage per leg TA=125°C IR 5.0 500 uA Typical junction capacitance per leg (NOTE 1) CJ 15.0 pF Typical thermal resistance per leg (NOTE 2) RθJA RJ L 40.0 13.0 ℃/W Operating junction and storage temperature range Tj, TSTG -55 to +150 ℃ NOTES: (1) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts * JEDEC registered values KBPM Unit:inch(mm) 0.125 x 45 o (3.2) 0.600 (15.24) 0.560 (14.22) 0.034 (0.86) 0.028 (0.76) 0.075 (1.91) 0.051 (1.29) 0.160 (4.1) 0.140 (3.6) 0.060 (1.52) Polarity shown on front side of case: positive lead by beveled corner 0.460 (11.68) 0.420 (10.67) 0.500 (12.70) 0.460 (11.68) (15.2) MIN. 0.50 (12.7) MIN. DIA. 0.1693 (4.3) 0.1456 (3.7) Dimensions in inches and (millimeters)
http://www.yeashin.com 2 REV.02 20120305 KBP005M THRU KBP10M DEVICE CHARACTERISTICS 0.1 1 10 100 100 20 60 80 100 120 140 0.2 0.4 0.6 0.8 1.0 40 150 1.2 1.4 1.6 100 0.01 0.1 0 20 40 60 80 100 0.01 0.1 FIG.1 - DERATING CURVE OUTPUT RECTIFIED CURRENT AMBIENT TEMPERATURE, °C PEAK FORWARD SURGE CURRENT, AMPERES
60 Hz RESISTIVE OR
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES T J =25°C PULSE WIDTH=300 µs 1% DUTY CYCLE FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG REVERSE VOLTAGE, VOLTS T J =25°C f=1.0 MH Z Vsig=50mVp-p T J =25°C CAPACITIVE LOAD Ipk/I AV =5.0 Ipk/I AV =10 Ipk/I AV =20 (PER LEG) P.C.B. MOUNTED WITH 0.47 x 0.47” (12 x 12mm) COPPER PADS BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT, AVERAGE AMPERES NUMBER OF CYCLES AT 60 H Z T J =100°C FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG SINGLE SINE-WAVE (JEDEC Method) T A =25°C T J =150°C T J =125°C JUNCTION CAPACITANCE, pF