KBL601 TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen UL Recognized File # E-96005 /cuspopen Ideal for printed circuit board /cuspopen Reliable low cost construction /cuspopen High surge current capability /cuspopen High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension /cuspopen Leads solderable per MIL-STD-202, Method 208 KBL Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol KBL 601 KBL 602 KBL 603 KBL 604 KBL 605 KBL 606 KBL 607 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TA = 50℃ (Note 1) I(AV) 6.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 200 A Maximum Instantaneous Forward Voltage @ 6.0A VF 1.1 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ IR 10 500 uA uA Typical thermal Resistance (Note 1) (Note 2) RθJA RθJL 2.4 ℃/W Operating Temperature Range TJ TJ -55 to +125 ℃ Storage Temperature Range TSTG TSTG -55 to +150 ℃ Note: 1. Thermal Resistance from Junction to Ambient Al-Plate. Lead Length and 0.6” x 0.6” (16mm x 16mm) Copper Pads.
- 679 - RATINGS AND CHARACTERISTIC CURVES (KBL601 THRU KBL607) FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 0 20 40 60 80 100 120 140 0.01 0.1 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TJ=100 C0 TJ=25 C0 FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT PEAK FOR WARD SURGE CURRENT . (A) 10 10001000 300 100 200 NUMBER OF CYCLES AT 60Hz FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 50 100 150 AMBIENT TEMPERATURE. ( C) o FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 INSTANTANEOUS FORWARD VOLTAGE. (V) INSTANTANEOUS REVERSE CURRENT .( A ) Tj=25 C PULSE WIDTH-300 S 2% DUTY CYCLE