KBL4005_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
DN:T19809A0 https://www.microdiode.com Rev:2019A0 Page :1 Reverse Voltage - 50 to 1000 V olts Forward Current - 4.0 Amperes KBL4005 THRU KBL410 Feat ures Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unlss otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Mechanical Data The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 260°C/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension Case : JEDEC KBL Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Weight : / KBL Dimensions in inches and (millimeters) 0.768(19.5) 0.728(18.5) 0.580(14.7) 0.540(13.7) 0.640(16.3) 0.598(15.2) 0.670 (17.0) MIN. 0.052(1.3) 0.046(1.18) 0.083 (2.1) 0.220(5.6) 0.180(4.6) 0.256(6.5) 0.217(5.5) + - AC Parameter SYMBOLS KBL 4005 KBL 401 KBL 402 KBL 404 KBL 406 KBL 408 KBL 410 UNITS Marking C ode MDD KBL 4005 MDD KBL 401 MDD KBL 402 MDD KBL 404 MDD KBL 406 MD D KBL 408 MDD KBL 410 Maximum repet itive peak reverse voltage VRRM 50 100 200 4 00 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 2 80 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 4 00 600 800 1000 V Maximum average forward TC=50°C(Note 2) output rectified current at TA =50°C(Note 3) I(AV) 4.0 3.0 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125 A Rating fo r Fusing(t<8.3ms) I t 166 A s Maximum instantaneousf orward voltage drop per birdge element at 4.0A VF 1.0 V Maximum DC reverse current TA=25°C at rated DC blocking voltage TA=100°C IR 10 μA 1.0 mA Typical Junction Capacitance (Note 1) CJ 105 pF Typical T hermal Resistance (Note 2) RθJA 20 °C/W Operat ing junction temperature range TJ -65 to +150 °C storage temperature range TSTG -55 to +150 °C NOTES: 1.Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
Rev:2019A0 Page :2 Ratings And Characteristic Curves The curve above is for reference only. https://www.microdiode.com Reverse Voltage - 50 to 1000 V olts Forward Current - 4.0 Amperes KBL4005 THRU KBL410 4.0 3.2 2.4 1.6 0.8 0 25 50 75 100 125 150 175 125 100 0.1 1.0 10 100 0.01 0.1 1 10 100 100 0.1 REVERSE VOLTAGE,VOLTS t,PULSE DURATION,sec. FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS NUMBER OF CYCLES AT 60 Hz FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1- FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERESINSTANTANEOUS FORWARD CURRENT,AMPERES JUNCTION CAPACITANCE, pF PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS Single Phase Half Wave 60Hz Resistive or inductive Load 1 10 100 0.01 0.1 TJ=25 C PULSE WIDTH=300 µs 1%DUTY CYCLE TJ=25 C 200 400 0 20 40 60 80 100 1,000 100 0.1 0.01 TJ=100 C TJ=25 C PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TRANSIENT THERMAL IMPEDANCE, C/W AMBIENT TEMPERATURE, C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method)
https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout E B d F W PA D D1D2 C T Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing ABS 13" 3,000 4.0 6000 xxx*XXX*XX 330 360*360*360 48000 11.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(mm)(mm)(mm)(pcs)(mm)(pcs) Item Tolerance ABS Carrier width Carrier length Carrier depth Sprocket hole 13" Reel outside diameter 13" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.1 0.1 0.1 0.1 2.0 unit:mm 1.55 1.75 5.50 8.00 4.00 2.00 0.25 5.45 7.00 1.60 W1Reel width 330.00 50.00 13.00 12.00 12.40 0.05 Reverse Voltage - 50 to 1000 V olts Forward Current - 4.0 Amperes KBL4005 THRU KBL410