KBL4005 DAESAN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- High case dielectric Strength of 1500V
- Low Forward Voltage Drop, High Current Capability
- Surge Overload Rating to 150A Peak
- Ideal for Printed Circuit Board Application
- Plastic Material - UL Flammability Classification 94V-0 Maximum Ratings And Electrical Characteristics
- Case : Molded Plastic
- Terminals : Plated Leads, Solderable per MIL-STD-202, Method 208
- Polarity : Symbols Marked on Case
- Approx. Weight : 5.6 grams
- Marking : Type Number (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 4.0 Amperes VOLTAGE 50 to 1000 Volts K B L Dim Min Max A 18.50 19.50 B 15.40 16.40 C 19.00 D 6.20 6.50 E 4.60 5.60 G 1.50 2.00 H 1.30 T ypical A ll Dimens ions in mm Notes: (1) Thermal Resistance from junction to case per element mounted on PC board with 13 x 13 x 0.03mm land areas. (2) Non-repetitive for t > 1ms and < 8.3ms. Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking voltage RMS Reverse voltage Average Rectified Output Current @ TC=75 Non-Repetitive Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) VoltsForward Voltage per element @ IF=3.0 A VRMM VRWM VR
50 Volts
1.1VFM VRMS 4.0 Amps150IFSM Tj TSTG 1.0 -65 to +125 ¡É Amps Peak Reverse Current at Rated DC Blocking voltage I2t Rating for Fusing (t<8.3ms) (Note 2) Operating and Storage Temperature Range KBL 4005 KBL 401 KBL 402 KBL 404 KBL 405 KBL 406 KBL 407 166 100 200 140 400 280 600 420 800 560 1000
700 Volts
¥ìA A2S ¡É/W Io IR I2t R¥èJA @ TC=25¡É @ TC=100¡É Typical Thermal Resistance, Junction to Case (Note 1) 19 A B C E G H D
I , AVERAGE OUTPUT CURRENT (A)O T , CASE TEMPERA TURE (ºC) Fi g. 1 Forward Current Deratin g Curve C Single Phase Half Wave
60 Hz Resistive or Inductive Load
0.01 0.1 1.0 0 20 40 60 80 100 120 140 I , INST ANT ANE OUS REVERSE CURRENT (mA)R PERCENT OF RA TED PEAK REVERSE VOL TAGE (% ) Fig. 4 Typical Reverse Characteristics, per element T = 100°CC T = 25°CA 100 150 200 250 1 10 100 8.3ms Single Half Sine-W ave JEDEC Method I , PEAK F OR WARD SURGE CURRENT (A)FSM NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 0.01 0.1 1.0 I , INST ANT ANE OUS FWD CURRENT (A)F V , INST ANT ANEOUS FOR WARD V OLTAGE (V) Fig. 2 Typical Forward Characteristics F Tj = 25ºC Pulse Width = 300 ms 2% Duty Cycle10 RATING AND CHARACTERISTIC CURVES KBL4005 THRU KBL407