KBJ8005 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unless otherwisespecified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Mechanical Data Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique Plastic material has U/L lammability classification 94V-0 Case : JEDEC KBJ Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any KBJ Dimensions in inches and (millimeters) ? .13 4(3.4) ? .122(3.1) SPACING.303(7.7) .287(7.3).287(7.3) .303(7.7).303(7.7) .287(7.3) 134( 122( 3.4) 3.1) .023( 0.6) .031(0.8) .114(2.9) .098(2.5) .150(3.8) .134(3.4) .173(4.4) .189(4.8) .382( .366( 9.7) 9.3) .157 (4.0 .708( .669( 18.0) 17.0) .150( .130( 3.8) 3.3) .074( .059( 1.9) 1.5) .035( 0.9) .043(1.1) .083(2.1) .069(1.7) .041(1.05) .057(1.45) .602( .578( 15.3) 14.7) .995( 25.3) .983(24.7) -~ ~+ .11 8(3.0)*45° Parameter SYMBO LS KBJ 8005 KBJ 801 KBJ 802 KBJ 804 KBJ 806 KBJ 808 KBJ
810 UNIT
S Marking Code MDD KBJ 8005 MDD KBJ 801 MDD KBJ 802 MDD KBJ 804 MDD KBJ 806 MDD KBJ 808 MDD KBJ 810 Max imum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward(with heatsink NOTE 2) Rectified current @T c =100°C(without heatsink) I(AV) 8.0 2.9 A Peak forwar d surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200.0 A Rat ing for Fusing(t<8.3ms) I t 166.0 A s Maximum forward voltage at 4.0A DC VF 1.0 V Maximum forward voltage at 8.0A DC VF 1.1 V Maximum DC reverse current TA=25°C at ratedD C blocking voltage TA=125°C IR 10 μA 500 μA Typical Junction Capacitance (Note 1) CJ 55 pF Ty pical Thermal Resistance (Note 2) RθJA 1.8 °C/W Operating junction temperat ure range TJ - 55t o+ 1 5 0 °C storage t emperature range TSTG - 55t o+ 1 5 0 °C NOTES: 1.Me asured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 75mm*75mm*1.6mm cu plate heatsink. 3.The typical data above is for reference only.
Rev:2019A0 Page :2 Ratings And Characteristic Curves The curve above is for reference only. https://www.microdiode.com Reverse Voltage - 50 to 1000 Volts Forward Current - 8.0 Amperes KBJ8005 THRU KBJ810 NUMBER OF CYCLETS AT 60Hz PEAK FORWARD SURGE CURRENT, AMPERES FLG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 10 100 200 225 100 150 2 50205 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 1000 100 1.0 0.1 02 0 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS REVERSE CURRENT ,(uA) FIG.5-TYPICAL REVERSE CHARACTERISTICS TJ=125°C TJ=100°C TJ=50°C TJ=25°C FIG.3-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(VOLTS) CAPACITANCE,(pF) 10.0 1001.0 1.0 100 TJ=25°C,f=1MHZ FIG.1-FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT AMPERES SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD WITH HEATSINK WITHOUT HEATSINK 60 120 1401008040200 7.0 1.0 6.0 3.0 4.0 2.0 5.0 8.0 INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.4-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 100 0.1 1.0 TJ = 25°C PULSE WIDTH 300us