KBJ604

KBJ6005 CHENDA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

GLASS PASSIVATED BRIDGE RECTIFIERS DN:T19812A0 https://www.microdiode.com Rev:2019A0 Page :1 Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes KBJ6005 THRU KBJ610 Fea tures Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unless otherwisespecified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Mechanical Data Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique Plastic material has U/L lammability classification 94V-0 Case : JEDEC KBJ Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any KBJ Dimensions in inches and (millimeters) ? .13 4(3.4) ? .122(3.1) SPACING.303(7.7) .287(7.3).287(7.3) .303(7.7).303(7.7) .287(7.3) 134( 122( 3.4) 3.1) .023( 0.6) .031(0.8) .114(2.9) .098(2.5) .150(3.8) .134(3.4) .173(4.4) .189(4.8) .382( .366( 9.7) 9.3) .157 (4.0 .708( .669( 18.0) 17.0) .150( .130( 3.8) 3.3) .074( .059( 1.9) 1.5) .035( 0.9) .043(1.1) .083(2.1) .069(1.7) .041(1.05) .057(1.45) .602( .578( 15.3) 14.7) .995( 25.3) .983(24.7) -~ ~+ .11 8(3.0)*45° Parameter SYMBO LS KBJ 6005 KBJ 601 KBJ 602 KBJ 604 KBJ 606 KBJ 608 KBJ

610 UNIT

S Marking Code MDD KBJ 6005 MDD KBJ 601 MDD KBJ 602 MDD KBJ 604 MDD KBJ 606 MDD KBJ 608 MDD KBJ 610 Max imum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward(with heatsink NOTE 2) Rectified current @T c =100°C(without heatsink) I(AV) 6.0 2.8 A Peak for ward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 170.0 A Rat ing for Fusing(t<8.3ms) I t 120.0 A s Maximum forward voltage at 3.0A DC VF 1.0 V Maximum forward voltage at 6.0A DC VF 1.1 V Maximum DC reverse current TA=25°C at ratedD C blocking voltage TA=125°C IR 10 μA 500 μA Typical Junction Capacitance (Note 1) CJ 55 pF Ty pical Thermal Resistance (Note 2) RθJA 1.8 °C/W Operating junction temperat ure range TJ - 55t o+ 1 5 0 °C storage t emperature range TSTG - 55t o+ 1 5 0 °C NOTES: 1.Me asured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 75mm*75mm*1.6mm cu plate heatsink. 3.The typical data above is for reference only.

Rev:2019A0 Page :2 Ratings And Characteristic Curves The curve above is for reference only. https://www.microdiode.com Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes KBJ6005 THRU KBJ610 INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.4-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 100 0.1 1.0 TJ = 25°C PULSE WIDTH 300us 10 1000 2 50205 200 100 150 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 60 120 140 0.00 1.0 6.0 1008040200 3.0 4.0 2.0 5.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD WITH HEATSINK WITHOUT HEATSINK FIG.1-FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT AMPERES 1000 100 1.0 0.1 02 0 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS REVERSE CURRENT ,(uA) FIG.5-TYPICAL REVERSE CHARACTERISTICS TJ=125°C TJ=100°C TJ=50°C TJ=25°C FIG.3-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(VOLTS) CAPACITANCE,(pF) 10.0 1001.0 1.0 100 TJ=25°C,f=1MHZ NUMBER OF CYCLETS AT 60Hz PEAK FORWARD SURGE CURRENT, AMPERES FLG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 10 1000 2 50205 200 100 150 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD)