KBJ4A DAESAN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Glass Passivated Die Construction
- High Case Dielectric Strength of 1500VRMS
- Low Reverse Leakage Current
- Surge Overload Rating to 120A Peak
- Ideal for Printed Circuit Board Applications
- Plastic Material - UL Flammability Classification 94V-0 Maximum Ratings And Electrical Characteristics
- Case : Molded Plastic
- Terminals : Plated Leads, Solderable per MIL-STD-202, Method 208
- Polarity : Molded on Body
- Mounting : Through Hole for #6 Screw
- Mounting Torque : 5.0 in-Ibs Maximum
- Approx. Weight : 4.6 grams
- Marking : Type Number (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 4.0 Amperes VOLTAGE 50 to 1000 Volts Notes: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. (2) Thermal resistance from junction to case per element. Unit mounted on 300 x 300 x 1.6mm aluminum plate heat sink. Peak Repetitive Reverse voltage Working Peak Reverse voltage DC Blocking voltage RMS Reverse voltage Average Rectified Output Current @ TC=115 Non-Repetitive Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) VoltsForward voltage per element @ IF=2.0 A VRMM VRWM VR
50 Volts
1.0VFM VR(RMS) 4.0 Amps120IFSM Tj TSTG 500 -65 to +150 ¡É Amps Peak Reverse Current at Rated DC Blocking voltage Typical Junction Capacitance per element (Note 1) Operating and Storage Temperature Range KBJ KBJ KBJ KBJ KBJ KBJ KBJ 5.0 100 200 140 400 280 600 420 800 560 1000
700 Volts
¥ìA ¡É/W pF Io IR Cj R¥èJA @ TC=25¡É @ TC=125¡É Typical Thermal Resistance (Note 2) 5.5 K B J Dim Min Max A 24.80 25.20 B 14.70 15.30 17.20 17.80 C 4.00 Nominal D E 0.90 1.10 G 7.30 3.10 O/ 3.40 O/ 7.70 H A ll Dimens ions in mm Dim Min Max 3.30 3.70 1.50 1.90 9.30 9.70 2.50 2.90 3.40 3.80 4.40 4.80 0.60 0.80 K J L M N P R A B D JK C E G H L M N P R
RATINGS AND CHARACTERISTIC CURVES KBJ4A THRU KBJ4M 0.01 0.1 1.0 V , INST ANT ANEOUS FOR WARD VOL TAGE (V) Fi g. 2 Typical Forward Characteristics F I , INST ANT ANEOUS FOR WARD CURRENT (A)F T = 150°CJ T = 25°CJ Pulse width = 300µs 120 160 180 1 10 100 I , PEAK FWD SURGE CURRENT (A)FSM NUMBER OF CYCLES AT 60 Hz Fi g. 3 Max Non-Repetitive Sur ge Current T = 150°Cj Single half-sine-wave (JEDEC method) 100 1000 0.1 1.0 10 100 C , JUNCTION CAP ACIT ANCE (pF)j V , REVERSE VOL TAGE (V) Fi g. 4 Typical Junction Capacitance R f = 1MHz T = 25°Cj 0.1 1.0 100 1000 0 20 40 60 80 100 120 140 I ,INST ANTANEOUS REVERSE CURRENT (µA) R PERCENT OF RA TED PEAK REVERSE VOL TAGE (%) Fi g. 5 Typical Reverse Characteristics T = 150°CJ T = 125°CJ T = 100°CJ T = 25°CJ 25 50 75 100 125 150 I , AVERAGE RECTIFIED CURRENT (A)O T , CASE TEMPERA TURE (°C) Fi g. 1 Forward Current Deratin g Curve C Resistive or Inductive load