KBJ4005 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unless otherwisespecified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Mechanical Data Surge overload rating -135 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique Plastic material has U/L lammability classification 94V-0 Case : JEDEC GBU Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Weight : 0.00XX ounce, 0.0XX grams GBU Dimensions in inches and (millimeters) Parameter SYMBOLS GBU 4005 GBU 401 GBU 402 GBU 404 GBU 406 GBU 408 GBU
410 UNITS
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward(with heatsink NOTE 2) Rectified current @T c =100°C(without heatsink) I(AV) 4.0 2.4 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150.0 A Rating for Fusing(t<8.3ms) I t 93 A s Maximum forward voltage at 2.0A DC VF 1.0 V Maximum forward voltage at 4.0A DC VF 1.1 V Maximum DC reverse current TA=25°C at rated DC blocking voltage TA=125°C IR 10 μA 500 μA Typical Junction Capacitance (Note 1) CJ 45 pF Typical Thermal Resistance (Note 2) RθJA 2.2 °C/W Operating junction temperature range TJ - 5 5t o+ 1 5 0 °C storage temperature range TSTG - 5 5t o+ 1 5 0 °C NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 75mm*75mm*1.6mm cu plate heatsink. 3.The typical data above is for reference only. .874(22.2) .860(21.8) .146(3.7) .154(3.9) .224(5.7) .232(5.9) .126(3.2)*45 ° CHAMFER .720(18.3) .752(19.1) .720(18.29) .680(17.27) .073(1.85) .057(1.45) .035(0.9) .047(1.2) .100(2.54) .085(2.16) .065(1.65) .080(2.03) (5.3) (4.8) .210 .190 .190 .210 (4.8) (5.3) (5.3) (4.8) .210 .190 .133(3.37) .139(3.53) .091(2.3) .106(2.7) .022(.56) .018(.46) .401(10.2) .392(9.80) .437(11.1) .430(10.9)
Rev:2019A0 Page :2 Ratings And Characteristic Curves The curve above is for reference only. https://www.microdiode.com Reverse Voltage - 50 to 1000 Volts Forward Current - 4.0 Amperes KBJ4005 THRU KBJ410 AVERAGE FORWARD CURRENT AMPERES PEAK FORWARD SURGE CURRENT, AMPERES CAPACITANCE,(pF) INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT ,(uA) 5.0 4.0 FIG.1-FORWARD CURRENT DERATING CURVE WITH HEATSINK FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT 180 160
3.0 WITHOUT HEATSINK
PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 2.0 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.0 0 20 40 60 80 100 120 140 0 1 2 5 10 20 50 100 CASE TEMPERATURE, °C 100 FIG.3-TYPICAL JUNCTION CAPACITANCE 20.0 NUMBER OF CYCLETS AT 60Hz FIG.4-TYPICAL FORWARD CHARACTERISTICS 10.0 1.0 TJ=25°C,f=1MH Z 0.1 TJ=25°C 1.0 0.1 1.0 10.0 100 0.01 FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE. VOLTS 1000
100 TJ=125°C
TJ=100°C 1.0 TJ=50°C TJ=25°C 0.1 02 0 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)