KBJ4005G MIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000 Volts KBJ4005G THRU KBJ410G CURRENT 4.0 Amperes

FEATURES

  • Plastic package has UL Flammability Glassification 94V-0
  • Glass passivated chip junctions
  • High case dielectric strength of 1500 VRMS
  • High surge current capability
  • High temperature soldering guaranteed 260℃/10 seconds, 0.375”(9.5mm) lead length MECHANICAL DATA
  • Case: molded plastic body
  • Terminal: Plated leads solderable per MIL-STD-750 Method 2026
  • Mounting position: Any (Note 4)
  • Mounting Torque: 6 in – 1bs max.
  • Weight: 0.15 ounce,4.0 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
  • Ratings at 25℃ ambient temperature unless otherwise specified
  • Single Phase, half wave, 60Hz, resistive or inductive load
  • For capacitive load derate current by 20% SYMBOLS KBJ 4005G KBJ 401G KBJ 402G KBJ 404G KBJ 406G KBJ 408G KBJ 410G UNIT Maximum Reverse Peak Repetitive Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 100 Volts Maximum Average Forward TC=100℃(Note 1) Rectified Current, At TA=40℃(Note 2) I(AV) 4.0

3.0 Amps

Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) IFSM 120 Amps Rating for Fusing (t＜8.3ms) I2t 60 A 2s Maximum Instantaneous Forward Voltage drop Per leg at 2.0A VF 1.0 Volts TA=25℃ 5.0 Maximum DC Reverse Current at rated DC blocking voltage per element TA=125℃ IR 500 μA Typical Junction Capacitance, per let (Note 3) CJ 100.0 45.0 pF Typical Thermal Resistance (Note 1) RJA 22.0 ℃/W Operating Junction Temperature Range TJ (-55 to +150) ℃/W Storage Temperature Range TSTG (-55 to +150) ℃ 3. Measured at 1.0 MHz and applied reverse voltage of 4.0 V 4. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum Heat transfer with #6 screws KBJ O φ3.1-3.4 9.3-9.7 3.3-3.7 3.4-3.8 4.4-4.8 0.6-0.8 2.8-3.2 0.9-1.1 0.8-1.0 1.5-1.9 3.0×45 24.8-25.2

SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000Volts KBJ4005G THRU KBJ410G CURRENT 4.0 Amperes

60 Hz Resistive or Inductive Load

0.375"(9.5mm) lead length 0.47×0.47"(12×12mm) Copper pads AP.C.B. Mounting, T (4.0×4.0×0.15cm) AL. Plate 1.6×1.6×0.06"Thk Heat-Sink Mounting, Tc 3.0 1.0 2.0 4.0 100150500 600-1000V 50-400V jT =25℃ f=1.0MHz Vsig=50mVp-p 1% Duty Cycle T =25℃J Pulse width=300 μ T =25℃J JT =125℃ 50-400V 600-1000V

1.0 CYCLE

(JEDEC Method) Single Sine-Wave max.JJT = T 0.1 100 11000.10.01 10 REVRESE VOLTAGE,(V) 0.1 101100 100 1000 0.01 0.1 100 100 0.1 0.01 500 1 10010 150 100 T, HEATING TIME (SEC.) JUNCTION CAPACITANCE, (pF) (℃/W) TRANSIENT THERMAL IMPEDANCE IMPEDANCE FIG. 6- TYPICAL TRANSIENT THERMAL PERCENT OF RATED PEAK REVERSE VOLTAGE,(V) FIG. 5- TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS FORWARD VOLTAGE, (V) PER LEG CURRENT, (A) INSTANTANEOUS FORWARD INSTANTANEOUS REVERSE CURRENT, (A) FIG. 4- TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG NUMBER OF CYCLES AT 60 HzTEMPERATURE, ℃ PER LGE (A) AVERAGE FORWARD OUTPUT,CURRENT PEAK FORWARD SURGE, CURRENT,(A) FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEGOUTPUT RECTIFIED CURRENT FIG. 1- DERATING CURVE RATINGS AND CHARACTERISTIC CURVES KBJ4005G THRU KBJ410G FIG. 3- TYPICAL FORWORD CHARACTERISTICS