KBJ25005_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
GLASS PASSIVATED BRIDGE RECTIFIERS DN:T19815A0 https://www.microdiode.com Rev:2019A0 Page :1 Reverse Voltage - 50 to 1000 Volts Forward Current - 25.0 Amperes KBJ25005 THRU KBJ2510 Fe atures Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unless otherwisespecified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Mechanical Data Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique Plastic material has U/L lammability classification 94V-0 Case : JEDEC KBJ Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any KBJ Dimensions in inches and (millimeters) ? . 134(3.4) ? .122(3.1) SPACING.303(7.7) .287(7.3).287(7.3) .303(7.7).303(7.7) .287(7.3) 134( 122( 3.4) 3.1) 23(0.6) .031(0.8) .114(2.9) .098(2.5) .150(3.8) .134(3.4) .173(4.4) .189(4.8) .382( .366( 9.7) 9.3) .157 (4. .708( .669( 18.0) 17.0) .150( .130( 3.8) 3.3) .074( .059( 1.9) 1.5) .035 (0.9) .043(1.1) .083(2.1) .069(1.7) .041(1.05) .057(1.45) .602( .578( 15.3) 14.7) .995 (25.3) .983(24.7) -~~+ 18(3.0)*45° Paramete r SYMB OLS KBJ 25005 KBJ 2501 KBJ 2502 KBJ 2504 KBJ 2506 KBJ 2508 KBJ
2510 UNI
J 2504 MDD KBJ 2506 MDD KBJ 2508 MDD KBJ 2510 Ma ximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V M aximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum D C blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward(with heatsink NOTE 2) Rectified current @T c =100°C(without heatsink) I(AV) 25.0 4.2 A Peak forward surge current 8.3m s single half sine-wave superimposed on rated load (JEDEC Method) IFSM 350.0 A Ra ting for Fusing(t<8.3ms) I t 508.0 A s Maximum forward voltage at 12.5A DC VF 1.0 V Maximum forward voltage at 25.0A DC VF 1.1 V Maximum DC reverse current TA=25°C at rated DC blocking voltage TA=125°C IR 10 μA 500 μA Ty pical Junction Capacitance (Note 1) CJ 85 pF T ypical Thermal Resistance (Note 2) RθJA 0.6 °C/W Operating junction temperature range TJ -5 5t o+ 1 5 0 °C storage temperature range TSTG -5 5t o+ 1 5 0 °C NOTES: 1.M easured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 75mm*75mm*1.6mm cu plate heatsink. 3.The typical data above is for reference only.
Rev:2019A0 Page :2 Ratings And Characteristic Curves The curve above is for reference only. https://www.microdiode.com Reverse Voltage - 50 to 1000 Volts Forward Current - 25.0 Amperes KBJ25005 THRU KBJ2510 1000 100 1.0 0.1 02 0 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS REVERSE CURRENT ,(uA) FIG.5-TYPICAL REVERSE CHARACTERISTICS TJ=125°C TJ=100°C TJ=50°C TJ=25°C FIG.1-FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT AMPERES 60 120 140 1008040200 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD WITH HEATSINK WITHOUT HEATSINK FIG.3-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(VOLTS) CAPACITANCE,(pF) TJ=25°C,f=1MHZ 10.0 1001.0 1.0 100 1000 NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT , AMPERES FIG.2-MAXMUN NON-REPETITIVE SURGE CURRENT 300 250 100 1 2 5 10 20 50 100 200 150 350 TJ=25°C (JEDEC METHOD) SINGLE -SINE- WAVE INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.4-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 100 0.1 1.0 TJ = 25°C PULSE WIDTH 300us