KBJ25005 SHUNYE | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
GLASS PASSIVATED BRIDGE RECTIFIERS 50 to 1000 V25.0 A KBJ25005 THRU KBJ2510 Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unless otherwisespecified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. KBJ Dimensions in inches and (millimeters) ? .134(3.4) ? .122(3.1) SPACING.303(7.7) .287(7.3).287(7.3) .303(7.7).303(7.7) .287(7.3) 134( 122( 3.4) 3.1) .023(0.6) .031(0.8) .114(2.9) .098(2.5) .150(3.8) .134(3.4) .173(4.4) .189(4.8) .382( .366( 9.7) 9.3) .157 (4.0) .708( .669( 18.0) 17.0) .150( .130( 3.8) 3.3) .074( .059( 1.9) 1.5) .035(0.9) .043(1.1) .083(2.1) .069(1.7) .041(1.05) .057(1.45) .602( .578( 15.3) 14.7) .995(25.3) .983(24.7) -~~+ .118(3.0)*45° Parameter SYMBOLS KBJ 25005 KBJ 2501 KBJ 2502 KBJ 2504 KBJ 2506 KBJ 2508 KBJ 2510 UNITS Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 800 1000 V Maximum RMS voltage V RMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 V Maximum average forward(with heatsink NOTE 2) Rectified current @T c =100°C(without heatsink) I (AV) 25.0 4.2 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) I FSM 350.0 A Rating for Fusing(t<8.3ms) I t 508.0 A s Maximum forward voltage at 12.5A DC V F 1.0 V Maximum forward voltage at 25.0A DC V F 1.1 V Maximum DC reverse current TA=25°C at rated DC blocking voltage TA=125°C I R 10 μA 500 μA Typical Junction Capacitance (Note 1) C J pF Typical Thermal Resistance (Note 2) R θ JA 0.6 °C/W Operating junction temperature range T J -55t o+ 1 5 0 storage temperature range T STG -55t o+ 1 5 0 NOTES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 75mm*75mm*1.6mm cu plate heatsink. 3.The typical data above is for reference only.
FEATURES
- Rating to 1000V PRV
- Ideal for printed circuit board
- Low forward voltage drop,high current capability
- Reliable low cost construction utilizing molded plastic technique results in inexpensive product
- The plastic material has UL flammability classification 94V-0
- Weight: 0.151 ounces , 4.27 grams MAXIMUM RATINGS AND
ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.Single phase, half wave ,60Hz, resistive or inductive load.For capacitive load, derate current by 20% www.shunyegroup.com.cn V2.23
Ratings And Characteristic Curves The curve above is for reference only. 1000 100 1.0 0.1 02 0 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS REVERSE CURRENT ,(uA) FIG.5-TYPICAL REVERSE CHARACTERISTICS T J =125°C T J =100°C T J =50°C T J =25°C FIG.1-FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT AMPERES 120 140 100 200 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD WITH HEATSINK WITHOUT HEATSINK FIG.3-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(VOLTS) CAPACITANCE,(pF) T J =25°C,f=1MH Z 10.0 100 1.0 1.0 100 1000 NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT , AMPERES FIG.2-MAXMUN NON-REPETITIVE SURGE CURRENT 300 250 100 1 2 5 10 20 50 100 200 150 350 T J =25°C (JEDEC METHOD) SINGLE -SINE- WAVE INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.4-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 100 0.1 1.0 T J = 25°C PULSE WIDTH 300us www.shunyegroup.com.cn V2.23