KB2800CGKD KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
z Uniform light emitting area. z Low current operation z Easily mounted on P.C. boards. z Flush mountable. z Excellent on/off contrast. z Can be used with panels and legend mounts. z Categorized for luminous intensity. z RoHS compliant.
Description
The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAM8377 REV NO: V.2A DATE: APR/06/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1334000540 Selection Guide Notes: 1. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1. 1 / 10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. Part No. Dice Lens Type Iv (mcd) [1] @ 20mA Min. Typ. KB2800CGKD Green (AlGaInP) 55 91 *12 *36 Green Diffused Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Green 574 nm I F=20mA λD [1] Dominant Wavelength Green 570 nm I F=20mA Δλ1/2 Spectral Line Half-width Green 20 nm I F=20mA C Capacitance Green 15 pF V F=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V I F=20mA IR Reverse Current Green 10 uA V R=5V Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature[2] 260°C For 3-5 Seconds Notes: 1. Wavelength: + / -1nm. 2. Forward Voltage: + / -0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
SPEC NO: DSAM8377 REV NO: V.2A DATE: APR/06/2015 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1334000540 Green KB2800CGKD
SPEC NO: DSAM8377 REV NO: V.2A DATE: APR/06/2015 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1334000540 PACKING & LABEL SPECIFICATIONS KB2800CGKD Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAM8377 REV NO: V.2A DATE: APR/06/2015 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1334000540
SPEC NO: DSAM8377 REV NO: V.2A DATE: APR/06/2015 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1334000540