K90L BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Large one to five color indicator with flashing input control

  • Bright, uniform indicator light
  • All models have flashing input control Models are available with up to five colors in one device
  • Rugged IP67-rated design
  • 12 V DC to 30 V DC operation Models Model No. of Colors Colors Input Connection K90LGPQ Green PNP 5-pin M12 Quick Disconnect K90LRPQ Red K90LYPQ Yellow K90LBPQ Blue K90LWPQ White K90LGNQ Green NPN K90LRNQ Red K90LYNQ Yellow K90LBNQ Blue K90LWNQ White Model No. of Colors Colors Connection Input K90LGRPQ 2 Green, Red 5-pin M12 Quick Disconnect PNP K90LGYRPQ 3 Green, Red, Yellow K90LBGYRPQ 4 Blue , Green, Yellow, Red 8-pin M12 Quick Disconnect K90LWBGYRPQ 5 White, Blue, Green, Yellow, Red K90LGRNQ 2 Green, Red 5-pin M12 Quick Disconnect NPN K90LGYRNQ 3 Green, Red, Yellow K90LBGYRNQ 4 Blue , Green, Yellow, Red 8-pin M12 Quick Disconnect K90LWBGYRNQ 5 White, Blue, Green, Yellow, Red Integral quick disconnect models are listed; a mating cordset is required (see Accessories on page 4).
  • To order the 150 mm (5.9 in) PVC cable with quick disconnect models, replace Q with QP in the model number, for example, K90LGYRQP.
  • To order the 2 m (6.5 ft) cable models, omit the suffix Q in the model number, for example, K90LGYR. Washdown Silicone Cover WC-K90 Washdown Cover Model Description WC-K90 FDA-grade silicone cover EZ-LIGHT K90L Original Document 181765 Rev. G

9 September 2022

Installing the Silicone Cover To properly install the FDA-grade silicone cover and achieve an IP69 rating, follow these instructions. 1. Turn the cover inside-out. Place the cover on top of the indicator. 3. Roll the cover onto the indicator. 4. Continue rolling the cover down, around the base of the indicator, until the entire light is covered. 5. Mount the indicator and cover assembly to a bracket wide enough to cover the base of the assembly. The cover should be clamped firmly between the indicator and the bracket. (fits over K90) Note: The FDA-grade silicone cover withstands high pressure, high temperature washdown, and increases the product rating to IEC IP69. The cover is ECOLAB® certified to withstand aggressive cleaning procedures with chemicals used in the food processing industry. Specifications Supply Voltage and Current

12 V DC to 30 V DC

Supply Protection Circuitry Protected against reverse polarity and transient voltages Input Response Time 75 ms maximum Adjustments

1.6 Hz flash rate via flash input wire

Integral 5-pin M12 male quick-disconnect connector; Integral 8-pin M12 male quick-disconnect connector ; 150 mm (6 in) PVC-jacketed cable with a 5-pin M12 male quick-disconnect connector; 150 mm (6 in) PVC-jacketed cable with an 8-pin M12 male quick-disconnect connector; or 2 m (6.5 ft) unterminated 3-wire PVC-jacketed cable depending on the model Light Characteristics Color Typical Wavelength or Color Temperature Typical Intensity Red 625 nm 65 lumens Yellow 590 nm 35 lumens Green 525 nm 150 lumens Blue 470 nm 55 lumens White 6000–7100 K 200 lumens Indicators 1 to 5 colors, depending on the model Only one color can be on at a time. The higher color number overrides the lower color number. Construction Base and dome: Polycarbonate Environmental Rating IP67; Enclosure UL Type 4X, 13 Vibration and Mechanical Shock All models meet MIL-STD-202F, Method 201A (Vibration: 10 Hz to 60 Hz maximum, 0.06 inch (1.52 mm) double amplitude, 10G maximum acceleration) requirements. Also meets IEC 60947-5-2 (Shock: 30G 11 ms duration, half sine wave) requirements. Operating Conditions Certifications Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 EZ-LIGHT K90L 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 181765 Rev. G

All measurements are listed in millimeters [inches], unless noted otherwise. Standard Model 20 mm [0.79”] 87 mm [3.43”] 90 mm [3.54”] M30 X 1.5 M12 X 1 1/2-14 NPT CL CL CL Model with Washdown Cover (K90 shown in gray) 72.5 mm [2.85”] Ø 96.5 mm [3.80”] Ø 62.0 mm [2.44”] Wiring 5-pin PNP Input 5-Pin NPN Input Key 12–30 V dc Indicator Color F 5 12–30 V dc Indicator Color F 5 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Gray wire (flashing input) EZ-LIGHT K90L P/N 181765 Rev. G www.bannerengineering.com - Tel: + 1 888 373 6767 3

8-pin PNP Input 8-Pin NPN Input Key 12–30 V dc Indicator Color C4 5 C5 4 F Not used 12–30 V dc Indicator Color C4 5 C5 4 F Not used 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red Red wire (flashing input); the green wire is not used. Accessories Cordsets 5-Pin Threaded M12 Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.5 m (1.5 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-503 0.9 m (2.9 ft) MQDC1-506 2 m (6.5 ft) MQDC1-515 5 m (16.4 ft) MQDC1-530 9 m (29.5 ft) MQDC1-560 18 m (59 ft) MQDC1-506RA 2 m (6.5 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 5 m (16.4 ft) MQDC1-530RA 9 m (29.5 ft) MQDC1-560RA 19 m (62.3 ft) EZ-LIGHT K90L 4 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 181765 Rev. G

8-Pin Threaded M12 Cordsets with Open-Shield—Single Ended Model Length Style Dimensions Pinout (Female) MQDC2S-806 2.04 m (6.7 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red MQDC2S-815 5.04 m (16.54 ft) MQDC2S-830 10.04 m (32.95 ft) MQDC2S-850 16 m (52.49 ft) MQDC2S-806RA 2 m (6.56 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC2S-815RA 5 m (16.4 ft) MQDC2S-830RA 10 m (32.81 ft) MQDC2S-850RA 16 m (52.49 ft) Elevated Mount System Model Features Components SA-M30 - Black Polycarbonate • Streamlined black PC or Gray PC thread cover

  • Covers M30 thread on the light base Mounting hardware includedSA-M30C - Gray Polycarbonate Polished 304 Stainless Steel Black Anodized Aluminum Clear Anodized Aluminum
  • Elevated-use stand-off pipe (½ in. NPSM/DN15)
  • Polished 304 stainless steel, black anodized aluminum, or clear anodized aluminum surface ½ in. NPT thread at both ends
  • Compatible with most industrial environments SOP-E12-150SS 150 mm (6 in) long SOP-E12-150A 150 mm (6 in) long SOP-E12-150AC 150 mm (6 in) long SOP-E12-300SS 300 mm (12 in) long SOP-E12-300A 300 mm (12 in) long SOP-E12-300AC 300 mm (12 in) long SOP-E12-900SS 900 mm (36 in) long SOP-E12-900A 900 mm (36 in) long SOP-E12-900AC 900 mm (36 in) long SA-E12M30 - Black Acetal • Streamlined black acetal or white UHMW mounting base adapter/cover
  • Connects between ½ in. NPSM/DN15 pipe and 30 mm (1-3/16 in) drilled hole Mounting hardware included SA-E12M30C - White UHMW Pipe Mounting Flange Model Features Construction SA-F12
  • Elevated-use stand-off pipes (½ in, NPSM/DN15)
  • M5 mounting hardware and nitrile gasket included Die-cast zinc base with black paint ø28 ø70 1/2-14 NPSM 4x ø5.5 Foldable Mounting Brackets Model Features Construction SA-FFB12
  • For use with 1/2 inch stand-off pipes
  • Stainless steel hardware Black polycarbonate 111 110° 1/2-14 NPSM 4 x Ø5Ø70 SA-FFB12C Gray polycarbonate EZ-LIGHT K90L P/N 181765 Rev. G www.bannerengineering.com - Tel: + 1 888 373 6767 5

LMB Sealed Right-Angle Bracket Model Description Construction LMB30RA Direct-Mount Models: Bracket kit with base, 30 mm adapter, set screw, fasteners, O-rings, and gaskets. Black polycarbonate LMB30RAC Gray polycarbonate LMBE12RA Pipe-Mount Models: Bracket kit with base, ½-14 pipe adapter, set screw, fasteners, O-rings, and gaskets. For use with stand-off pipe (listed and sold separately). Black polycarbonate LMBE12RAC Gray polycarbonate Brackets LMBE12RA35

  • Direct mounting of stand-off pipe, with common bracket type Zinc-plated steel
  • 1/2-14 NPSM nut
  • Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm Hole center spacing: 20.0 38.25 2X Ø9 1/2 - 14 NPSM NUT LMBE12RA45
  • Direct mounting of stand-off pipe, with common bracket type Zinc-plated steel
  • 1/2-14 NPSM nut
  • Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm Hole center spacing: 35.0 38.25 2X Ø11 1/2 - 14 NPSM NUT Sun Shield K90DS
  • Use for enhanced visibility in direct sunlight conditions Polycarbonate Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. EZ-LIGHT K90L © Banner Engineering Corp. All rights reserved