K600 | DigiCamel IC Datasheet

Online Datasheet

Read K600 online.

K600 SENSATA | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 4

Technical content

Support Analog current & Analog voltage multiplex Input
Hardware Watchdog
CAN communication port, Bluetooth module
Design complies to BS EN 280-2013 and IEC61508 system level
Multi language display (English, Chinese, Korean) The K600 Platform Control System provides the reliability required in demanding applications such as Mobile Elevating Work Platforms; K600 is committed to the full control of slab self-propelled scissor lift. The key parts of the K600 Kit are the P610 (Platform Control Unit) and the E600 (Electronic Control Unit). The 2 units have been conceived as building block elements able to connect a variety of digital and analog machine interfaces such as joysticks, sensors, limit switches, LEDs, motor controller, pushbuttons, e-stop, alarms and control them through a CAN bus system. SPECIFICATIONS P610 Platform Control Unit E600 Electronic Control Unit P610 E600 Supply Ratings System Voltage: 12V or 24V DC Voltage Range: 10V~36V Max. output voltage: V supply DC N/A Certified to CE regulations Other Electrical Characteristics N/A Certified to CE regulations ESD: +/- 6KV Contact, +/-8KV Air Discharge per IEC 61000-4-2 Functional Electrical Custom Modifications
Custom overlay graphics
Language
Configurable analog input ports P610 E600 Operating Temperature -20 °C to 70 °C Protection Level IP65 (after installed) IP65 Life Joystick > 5 million cycles Pushbuttons > 1million cycles N/A Mechanical Certification
TUV Certified – Tested according to: – UL 61010-1:2012/R:2019-07 – UL 61010-2-201:2018 – CSA C22.2 No. 61010-1:2012/A1:2018-11 – CSA C22.2 No. 61010-2-201:2018

Copyright © 2022 Sensata Technologies, Inc. sensata.com Page 2 P610 Platform Control Unit E600 Electronic Control Unit System Voltage:12V or 24V DC, Voltage Range: 10V~36V. Power consumption <5W. Connectors: CN1 = 35 Pin, AMP 776231-1. CN2 = 14 Pin, AMP 776262-1. Pin Signal Type Characteristic Pin Signal Type Characteristic CN1-1A Digital Input 24VDC/0VDC CN1-7B Digital Output 24VDC@2.5A CN1-2A Digital Input 24VDC/0VDC CN1-8B Digital Output 24VDC@2.5A CN1-3A Digital Output 24VDC@2.5A CN1-9B Digital Output 0VDC@1A CN1-4A Power Input 24VDC@7A CN1-10B Digital Input 24VDC/0VDC CN1-5A Power Input 24VDC@7A CN1-11B Digital Input 24VDC/0VDC CN1-6A Digital Output 24VDC@2.5A CN1-1C Comm. Serial data link CN1-7A Digital Output 24VDC@2.5A CN1-2C Power Input 24VDC@2A CN1-8A Digital Output 24VDC@2.5A CN1-3C Analog Input 0-5VDC/4-20mA CN1-9A Analog Output 0-5VDC@10mA CN1-4C Analog Output 0-5VDC@10mA CN1-10A Digital Input 24VDC/0VDC CN1-5C Digital Input 5VDC/0VDC CN1-11A Analog Input 0-5VDC/4-20mA CN1-6C Digital Output 24VDC@2.5A CN1-12A Digital Input 24VDC/0VDC CN1-7C Digital Output 24VDC@2.5A CN1-1B Comm. Serial data link CN1-8C Digital Output 24VDC@2.5A CN1-2B Digital Input 24VDC/0VDC CN1-9C Digital Output 24VDC@2.5A CN1-3B Power Ground 0VDC@2A CN1-10C Digital Input 24VDC/0VDC CN1-4B Analog Input 0-5VDC CN1-11C Digital Input 24VDC/0VDC CN1-5B Digital Input 5VDC/0VDC CN1-12C Digital Input 24VDC/0VDC CN1-6B Digital Output 24VDC@2.5A CN1 Connector CN2 Connector Pin Signal Type Characteristic CN2-1A Digital Output 24VDC@2.5A CN2-2A Analog Input 0-5VDC CN2-3A Power Output 5VDC@200mA CN2-4A Comm. CAN level H CN2-5A Comm. CAN level L CN2-1B Analog Input 4-20mA CN2-2B Analog Input 4-20mA CN2-3B PWM Output 24VDC@2.5A CN2-4B PWM Output 24VDC@2.5A CN2-1C NA NA CN2-2C Digital Input 24VDC/0VDC CN2-3C Digital Input 24VDC/0VDC CN2-4C Digital Input 24VDC/0VDC CN2-5C Digital Output 24VDC@2.5A

1 USB port (B Type):

USB used for base board application update Pin 1 Ground Pin 2 CAN High Pin 3 E-Stop Out (+24V out) Pin 4 +24V in Pin 5 CAN Low Pin 6 Unused Pin 1 Power 9~36VDC Pin 2 Analog Input 0 0~30VDC Pin 3 Analog Input 1 0~30VDC Pin 4 Analog Input 2 0~30VDC Pin 5 Ground 0VDC A1 Connector Connector: 6 Pin, SIBAS HQ-005-M; Pin Current Rating 7.5Amps A2 Connector Connector PLT-166-RL-R

sensata.com Copyright © 2022 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements, and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA Page 4 Rev:05/30/23 CONTACT US INDUSTRIAL SOLUTIONS DIVISION Americas +1 (800) 350 2727 sensors.deltatech@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 ost-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 ORDERING INFORMATION K600-00-01 Part Number K600-00-01 K600 Product Platform Control Kit for Slab Scissor Lift

Description

K600 Kit includes: Part Number Description E600 Electronic Control Unit P610 Platform Control Unit M700 (option) Motor Controller 24/36V 275Amp E600 Electronic Control Unit 6.59(167.30) )00.711(16.4 6.13(155.80) 2xM4 )0.711(16.4 7.26(184.3) 6.57(167.0) )0.431(82.5 )4.531(33.5 3.29(83.5) 4.96(126.1) 4.78(121.3) )0.15(00.2 )19.47(59.2 2 31 C B D E A F ECO NUMBER APPROVED A B C D E F 6 7 85 41 2 3 6 7 8 DESCRIPTIONREVZONE DATE . . . INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. .X : 0.3 .XX: 0.13 0.5 .XXX ±0.050 THIRD ANGLE PROJECTION 1:5 REV

1 OF 1

NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. TOLERANCES E600-ENV E600,ECU ANGULARLINEAR L.CHEN 29-STP-2022 DO NOT SCALE DRAWING

18 CHUANGXIN ROAD

6.59(167.30) )00.711(16.4 6.13(155.80) 2xM4 )0.711(16.4 7.26(184.3) 6.57(167.0) )0.431(82.5 )4.531(33.5 3.29(83.5) 4.96(126.1) 4.78(121.3) )0.15(00.2 )19.47(59.2 2 31 C B D E A F ECO NUMBER APPROVED A B C D E F 6 7 85 41 2 3 6 7 8 DESCRIPTIONREVZONE DATE . . . INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. .X : 0.3 .XX: 0.13 0.5 .XXX ±0.050 THIRD ANGLE PROJECTION 1:5 REV NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. TOLERANCES E600-ENV E600,ECU ANGULARLINEAR L.CHEN 29-STP-2022 DO NOT SCALE DRAWING 6.59(167.30) )00.711(16.4 6.13(155.80) 2xM4 )0.711(16.4 7.26(184.3) 6.57(167.0) )0.431(82.5 )4.531(33.5 3.29(83.5) 4.96(126.1) 4.78(121.3) )0.15(00.2 )19.47(59.2 2 31 C B D E A F ECO NUMBER APPROVED A B C D E F 6 7 85 41 2 3 6 7 8 DESCRIPTIONREVZONE DATE . . . INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. .X : 0.3 .XX: 0.13 0.5 .XXX ±0.050 THIRD ANGLE PROJECTION 1:5 REV NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. TOLERANCES E600-ENV E600,ECU ANGULARLINEAR L.CHEN 29-STP-2022 DO NOT SCALE DRAWING

Product Information

K600 specifications and overview.

Summary

PLATFORM CONTROL SYSTEM FOR BATTERY POWERED SCISSOR LIFT

Description

PLATFORM CONTROL SYSTEM FOR BATTERY POWERED SCISSOR LIFT

Source title K600 Datasheet(PDF) - Sensata Technologies, Inc.

Related Parts

More parts from the same family.

Browse manufacturer