K600 SPSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Radial leaded Devices Almost anywhere there is a low voltage Cured,flame retardant epoxy polymer power supply, up to DC60V and a load insulating material meets UL94V-0 to be protested, including: requirements Telecommumications system Bulk packaging,or tape and reel Network switching available on most models Power transformers Communication equipment Model I hold I trip V max V max I max P d max OP Interrupt Current Time Rmin Rmax R1max (A) (A) (Vdc) Vrms (A) (w) (A) (S) (Ω) (Ω) (Ω) K600-110U 0.11 0.20 60 600 3 1.0 1.00 8 6 16 24 K600-150U 0.15 0.30 60 600 3 1.0 1.00 9 5 14 22 K600-160U 0.16 0.32 60 600 3 1.0 1.00 10 4 12 18 Electrical characteristics(25℃ Maximum Time To Trip Resistance Ihold Itrip Vmax OP Vmax Interrupt Imax Pd Rmin/max Rmax R1max *CAUTION Typical power dissipatde from device when in the tripped state in 25℃ still air Minimum device resistance prior to tripping at 25℃. Hold Current:Maximum current device will not trip in 25℃ still air. Trip current:Minimum current at which the device will always trip in 25℃ still air Maximum device resistance one hour after it is trippde at 25℃ . Operation beyond the specified rating may result in damage and possible arcing. Maximum interrupt volatge(Vac) device can withstand without damage at ratde current. Maximum fault current device can withstand without damage at rated voltage. Maximum device resistance prior to tripping at 25℃. Maximum operating volatge(Vdc) device can withstand without damage at ratde current(Imax). -40 -20 0 25 40 50 60 70 80 Maximum ambidnt operating temperatures(℃ )Part number Thermal Derating Chart-I H (A) PPTC/K600 Series 01 | www.spsemi.cn REV.2014.05.01
u P a c k ag e Infor m ati on Bulk: p cs p e r b a g Model Fig A(max) B(max) C(max) D(typ) K600-110 1 14.0 14.0 6 5.1 K600-150 1 14.0 14.0 6 5.1 K600-160 1 14.0 14.0 6 5.1 ALL Dimensions (mm) Product dimensions (mm) Physical Characteristcs Material:Leads ALL Ti n p l a t e d copper, 20AWG,0 mm Test conditions Passive aging Humidity aging Thermal shock Resistance to solvent Vibration Resistance change Storage conditions:-40℃ to 85℃ ＋85℃,85%R.H.,100hrs ＋125℃,to-55℃,10times MIL-STD-202,Method 215 MIL-STD-202,Method 201 ±12% typical No change No change ±8% typical ±8% typical Environmental Specifications ＋85℃,100hts PPTC/K600 Series 02 | www.spsemi.cn T y p i c a l T i m e T o T r i p A t C Average Time Current Curves 0.1 100 0 0.5 1 1.5 2 2.5 3 CURRENT IN AMPERES TIME IN SECONDS K600-150 K600-160 T h e r m a l D e r a t i n g C u r v e Derating Curves for K600 Series 100 120 140 160 180 -40 -20 0 20 40 60 80 Temperature (°C) Percentage of Derated Curren t REV.2014.05.01