K50L BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Features
DC-Operated Indicators with Steady or Pulsed Sound Indication To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring, go to www.bannerengineering.com. WARNING: Do not use this device for personnel protection Using this device for personnel protection could result in serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. Models Wiring Diagrams © Banner Engineering Corp.
January 04, 2024page 2 EZ-LIGHT® K50L and K80L Audible Indicator Lights Datasheet Supply Wiring (AWG) Required Overcurrent Protection (A) Supply Wiring (AWG) Required Overcurrent Protection (A) 20 5.0 26 1.0 22 3.0 28 0.8 24 1.0 30 0.5 K50L Models 50.0 mm (1.97") 38 mm (1.50")* 20 mm (0.79") 11 mm (0.43") M30 x 1.5 (mounting nut included) Internal Threads ½ - 14 NPSM Max. Torque 4.5 Nm (40 in-lbf) Max. Torque 2.25 Nm (20 in-lbf) K80L Models 109.5 mm (4.31") 80.8 mm (3.18") 66.3 mm (2.61") 26.0 mm (1.02") M12 X 1 65.0 mm (2.56") 65.0 mm (2.56") 4X 8–32 UNC Max. Torque 1.12 Nm (10 in–lbf) 4X Ø 5.5 mm (Ø 0.22") Max. Torque 1.12 Nm (10 in–lbf) with supplied screws Internal Threads ½ - 14 NPSM Max. Torque 2.25 Nm (20 in–lbf) Specifications Supply Voltage and Current
18 V DC to 30 V DC at 40 mA maximum, per LED
color (alarm) Input Response Time Indicator ON/OFF: 10 ms maximum Oscillation Frequency A1 models: 3 kHz ± 500 Hz A2 models: 3 kHz ± 500 Hz; pulse rate 3 Hz ± 20% AL1 models: 2.7 kHz ± 500 Hz Operating Conditions Environmental Rating IP50 K50L models only: NEMA/UL Type 4X, 13 Indicators LEDs or audible independently selected: green, red, yellow Certifications Banner Engineering BV Park Lane, Culliganlaan 2F bus 3
1831 Diegem, BELGIUM
(K50L models only) (K50L models only) Connections Integral 5-pin M12 male quick-disconnect connector, or 150 mm (6 in) PVC-jacketed cable with a 5-pin M12 male quick-disconnect connector, or 2 m (6.5 ft) unterminated 5-wire PVC-jacketed cable, depending on model K80L Models: Terminal-wired models for use with bulk cable available Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Dimensions All measurements are listed in millimeters [inches], unless noted otherwise. © Banner Engineering Corp. All rights reserved.
EZ-LIGHT® K50L and K80L Audible Indicator Lights Datasheet January 04, 2024 page 3 5-Pin Threaded M12 Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.5 m (1.5 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-503 0.9 m (2.9 ft) MQDC1-506 2 m (6.5 ft) MQDC1-515 5 m (16.4 ft) MQDC1-530 9 m (29.5 ft) MQDC1-560 18 m (59 ft) MQDC1-5100 31 m (101.7 ft) MQDC1-506RA 2 m (6.5 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 5 m (16.4 ft) MQDC1-530RA 9 m (29.5 ft) MQDC1-560RA 19 m (62.3 ft) SMBDX80DIN Black reinforced thermoplastic Bracket for mounting on a 35 mm DIN rail Accessories Cordsets Brackets K80L Bracket © Banner Engineering Corp. All rights reserved.
January 04, 2024page 4 EZ-LIGHT® K50L and K80L Audible Indicator Lights Datasheet SMB30A Right-angle bracket with curved slot for versatile orientation Clearance for M6 (¼ in) hardware Mounting hole for 30 mm sensor 12-gauge stainless steel Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 × 6.3, C=ø 30.5 A B C SMB30MM 12-gauge stainless steel bracket with curved mounting slots for versatile orientation Clearance for M6 (¼ in) hardware Mounting hole for 30 mm sensor Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 × 7, B = ø 6.4, C = ø 30.1 A B C SMBAMS30RA Right-angle SMBAMS series bracket 30 mm hole for mounting sensors Articulation slots for 90°+ rotation 12-gauge (2.6 mm) cold-rolled steel Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0 A C B SMB30SC Swivel bracket with 30 mm mounting hole for sensor Black reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0 B A SMB30FA Swivel bracket with tilt and pan movement for precise adjustment Mounting hole for 30 mm sensor 12-gauge 304 stainless steel Easy sensor mounting to extrude rail T-slot Metric- and inch-size bolt available Bolt thread: SMB30FA, A= 3/8 - 16 × 2 in; SMB30FAM10, A= M10 - 1.5 × 50 Hole size: B= ø 30.1 A B 68.936.3 83.2 SMBAMS30P Flat SMBAMS series bracket 30 mm hole for mounting sensors Articulation slots for 90°+ rotation 12-gauge 300 series stainless steel Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0 93 A C B SMB30FVK V-clamp, flat bracket and fasteners for mounting to pipe or extensions Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions 30 mm hole for mounting sensors Hole size: A= ø 31 118 A K50L Brackets © Banner Engineering Corp. All rights reserved.
EZ-LIGHT® K50L and K80L Audible Indicator Lights Datasheet January 04, 2024 page 5 SMB30RAVK V-clamp, right-angle bracket and fasteners for mounting sensors to pipe or extrusion Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions 30 mm hole for mounting sensors Hole size: A = ø 30.5 90 A LMBE12RA35 Direct mounting of stand-off pipe, with common bracket type Zinc-plated steel 1/2-14 NPSM nut Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm Hole center spacing: 20.0 38.25 2X Ø9 LMBE12RA45 Direct mounting of stand-off pipe, with common bracket type Zinc-plated steel 1/2-14 NPSM nut Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm Hole center spacing: 35.0 38.25 Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. Document title: EZ-LIGHT® K50L and K80L Audible Indicator Lights Part number: 135242 Revision: G Original Instructions © Banner Engineering Corp. All rights reserved. 135242 © Banner Engineering Corp. All rights reserved.