K50H-3C0-SE

K50H-3C KSS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

• Miniature ceramic package
• Highly reliable with seam welding
• CMOS output
• Supply voltage V DD=3.3V
• Internal Bypass Capacitor
• Low Jitter
• ±25ppm available Table 1 How to Order Dimensions Specifications (Unit : mm) Recommended Land Pattern (Unit : mm) K50H-3C 0 - S E 125.000 qType(7×5 SMD, 3.3V) wFrequency Stability Code(See Table1) eDuty Ratio(S: 45% to 55% STD) rEnable/Disable Function(STD) tOscillation Frequency(Ex.: 125.000MHz) Packaging(Tape & Reel 1,000pcs/reel) wqe r t Stability TOPR Note Code (ppm) (°C) 0 ± 50 −10 to +70 Standard specifications S ± 30 (Standard) U ± 25 F ±100 −40 to +85 G ± 50 (Extend) With only certain frequencies With only certain frequencies Note: K50H Series has Bypass Capacitor of 0.01µF between VDD and GND. 1.8 5.08 4.2 2.0Plating: Ni+Au Tolerance: ±0.2 Pin Connections q Control w Case GND e Output r V DD Enable/Disable Function Pin1 Pin3(Output) Open Active "H" Level Active "L" Level High Z(No-Oscillation) 7.0 5.01.6 0.7 1.4 qw re 2.6 5.08 1.1 0.6 Overall conditions: initial tolerance, operating temperature range, rated power supply voltage change, load change, aging(1year @25°C), shock and vibration Note: Please contact us for inquires about extended operating temperature range, available frequencies and other conditions. All electrical characteristics are defined at the maximum load and operating temperature range. Item Symbol Conditions Min. Max. Units 20% VDD to 80% VDD 10% VDD to 90% VDD 20% VDD to 80% VDD 10% VDD to 90% VDD Output Frequency Range Frequency Stability Storage Temperature Range Operating Temperature Range Max. Supply Voltage Supply Voltage Current Consumption (Maximum Loaded) Duty Ratio(Symmetry) Duty Ratio(Symmetry) Rise/Fall Time 10% VDD to 90% VDD Maximum Loaded) Output Voltage-"L" Output Voltage-"H" Output Load Input Voltage Range Input Voltage-"L" Input Voltage-"H" Output Disable Time Output Enable Time Start-up Time Deterministic Jitter pk-pk 1Sigma jitter F OUT 50 170 MHz −25 +25 F SBY −30 +30 ppm −50 +50 T STG −55 +125 TOPR Standard −10 +70 °C Extend(option) −40 +85 ----- −0.5 7.0 VDD Stability: ±50ppm, ±100ppm(Ext Temp) 2.97 3.63 Volt Stability: ±25ppm, ±30ppm, ±50ppm(Ext Temp) 3.14 3.46 50 ≤FOUT≤ 8 5 M H z ----- 3 0 IDD 85<F OUT≤1 0 0 M H z ----- 4 0 mA 100<F OUT≤1 3 5 M H z ----- 5 0 135<F OUT≤1 6 0 M H z ----- 6 0 I ST Standby Function ----- 1 0 µA SYM @50% V DD 45 55 % 50≤FOUT<100MHz ----- 3 . 5 Tr/Tf ----- 5 . 0 nS 100≤FOUT≤160MHz ----- 1 . 5 ----- 2 . 0 V OL ----- 1 0 % V DD Volt V OH 90% V DD ----- CL CMOS ----- 1 5 p F V IN 0 V DD Volt V IL ----- 3 0 % V DD Volt V IH 70% V DD ----- ----- ----- 5 m S ST @Minimum operating Voltage to be 0sec. ----- 1 0 m S DJ Measured with "Wavecrest DTS-2079", VISI 6.3.1 ----- 2 psec 1sigma ----- 4 Pb Free RoHS Conforming

K50-3C SeriesCMOS / 3.3V / 7.0×5.0A

• Miniature ceramic package
• Highly reliable with seam welding
• CMOS output
• Supply voltage V DD=3.3V
• ±25ppm available Table 1 How to Order Dimensions Specifications (Unit : mm) Recommended Land Pattern (Unit : mm) K50-3C 0 - S E 25.0000 qType(7×5 SMD, 3.3V) wFrequency Stability Code(See Table1) eDuty Ratio(S: 45% to 55% STD) rEnable/Disable Function(STD) tOscillation Frequency(Ex.: 25.0000MHz) Packaging(Tape & Reel 1Kpcs/reel) wqe r t Stability TOPR Note Code (ppm) (°C) 0 ± 50 −10 to +70 Standard specifications S ± 30 (Standard) U ± 25 F ±100 −40 to +85 G ± 50 (Extend) With only certain frequencies With only certain frequencies 1.8 5.08 4.2 2.0 Note: A capacitor of value 0.01 µF between V DD and GND is recommended. 7.0 5.01.6 0.6 1.4 qw re R0.35 2.6 5.08 1.1 Plating: Ni+Au Tolerance: ±0.2 ∗ No-Oscillation: 8≤FOUT≤32MHz, 50<FOUT≤80MHz Pin Connections q Control w Case GND e Output r V DD Enable/Disable Function Pin1 Pin3(Output) Open Active "H" Level Active "L" Level High Z ∗ Note: Please contact us for inquires about extended operating temperature range, available frequencies and other conditions. All electrical characteristics are defined at the maximum load and operating temperature range. Item Symbol Conditions Min. Max. Units Overall conditions: initial tolerance, operating temperature range, rated power supply voltage change, load change, aging(1year @25 °C), shock and vibration Output Frequency Range Frequency Stability Storage Temperature Range Operating Temperature Range Max. Supply Voltage Supply Voltage Current Consumption (Maximum Loaded) Standby/Disable Current Duty Ratio(Symmetry) Rise/Fall Time (10% VDD to 90% VDD Maximum Loaded) Output Voltage-"L" Output Voltage-"H" Output Load Input Voltage Range Input Voltage-"L" Input Voltage-"H" Output Disable Time Output Enable Time Start-up Time F OUT 1.5 80 MHz −25 +25 F SBY −30 +30 ppm −50 +50 T STG −55 +125 TOPR Standard −10 +70 °C Extend(option) −40 +85 ----- −0.5 7.0 VDD Stability: ±50ppm, ±30ppm, ±100ppm(Ext Temp) 2.97 3.63 Volt Stability: ±25ppm, ±50ppm(Ext Temp) 3.14 3.46 1.5 ≤FOUT≤20MHz ----- 1 0 20<F OUT≤40MHz ----- 1 5 IDD 40<F OUT≤60MHz ----- 2 0 mA 60<F OUT≤80MHz ----- 3 0 8 ≤FOUT≤32MHz(Standby Function) ----- 1 0 µA I ST/IDE 32<F OUT≤50MHz(Disable Function) ----- 1 5 m A 50<F OUT≤80MHz(Standby Function) ----- 1 0 µA SYM @50% V DD 45 55 % 8 ≤FOUT≤26MHz ----- 1 0 Tr/Tf 26<F OUT≤45MHz ----- 8 n S 45<F OUT≤80MHz ----- 5 V OL I OL=8mA ----- 10% VDD Volt V OH I OH=−8mA 90% V DD ----- CL CMOS ----- 1 5 p F V IN 0 V DD Volt V IL ----- 30% VDD Volt V IH 70% V DD ----- ----- ----- 150 nS 8 ≤FOUT≤32MHz ----- 5 m S ----- 32<FOUT≤50MHz ----- 150 nS 50<F OUT≤80MHz ----- 5 m S ST @Minimum operating Voltage to be 0sec. ----- 1 0 m S Pb Free RoHS Conforming

CMOS / 5.0V / 7.0×5.0A Clock Crystal Oscillators Surface Mount Type K50-HC Series

• Miniature ceramic package
• Highly reliable with seam welding
• CMOS output
• Supply voltage V DD=5.0V
• ±25ppm available Table 1 How to Order Dimensions Specifications (Unit : mm) Recommended Land Pattern (Unit : mm) K50-HC 0 - C S E 25.0000 qType(7×5 SMD, 5.0V) wFrequency Stability Code(See Table1) eCMOS Output rDuty Ratio(S: 45% to 55% STD) tEnable/Disable Function(STD) yOscillation Frequency(Ex.: 25.0000MHz) Packaging(Tape & Reel 1Kpcs/reel) wqe r t y Stability TOPR Note Code (ppm) (°C) 0 ± 50 −10 to +70 Standard specifications S ± 30 (Standard) U ± 25 F ±100 −40 to +85 G ± 50 (Extend) With only certain frequencies With only certain frequencies Note: A capacitor of value 0.01 µF between V DD and GND is recommended. 1.8 5.08 4.2 2.0 7.0 5.01.6 0.6 1.4 qw re R0.35 2.6 5.08 1.1 Plating: Ni+Au Tolerance: ±0.2 Pin Connections q Control w Case GND e Output r V DD Enable/Disable Function Pin1 Pin3(Output) Open Active "H" Level Active "L" Level High Z Note: Please contact us for inquires about extended operating temperature range, available frequencies and other conditions. All electrical characteristics are defined at the maximum load and operating temperature range. Item Symbol Conditions Min. Max. Units Overall conditions: initial tolerance, operating temperature range, rated power supply voltage change, load change, aging(1year @25 °C), shock and vibration Output Frequency Range Frequency Stability Storage Temperature Range Operating Temperature Range Max. Supply Voltage Supply Voltage Current Consumption (Maximum Loaded) Disable Current Duty Ratio(Symmetry) Rise/Fall Time (10% VDD to 90% VDD Maximum Loaded) Output Voltage-"L" Output Voltage-"H" Output Load(CMOS) Input Voltage Range Input Voltage-"L" Input Voltage-"H" Output Disable Time Output Enable Time Start-up Time F OUT 1.5 68 MHz −25 +25 F SBY −30 +30 ppm −50 +50 T STG −55 +125 TOPR Standard −10 +70 °C Extend(option) −40 +85 ----- −0.5 7.0 VDD Stability: ±50ppm, ±30ppm, ±100ppm(Ext Temp) 4.5 5.5 Volt Stability: ±25ppm, ±50ppm(Ext Temp) 4.75 5.25 1.5 ≤FOUT≤20MHz ----- 2 5 I DD 20<F OUT≤40MHz ----- 3 5 m A 40<F OUT≤68MHz ----- 5 0 I DE @68.0000MHz ----- 3 0 m A SYM @50% V DD 45 55 % 8 ≤FOUT≤26MHz ----- 1 0 Tr/Tf 26<F OUT≤45MHz ----- 8 n S 45<F OUT≤68MHz ----- 5 V OL I OL=16mA ----- 10% VDD Volt V OH I OH=−16mA 90% V DD ----- CL 8 ≤FOUT≤50MHz ----- 5 0 pF 50<F OUT≤68MHz ----- 1 5 V IN 0 V DD Volt V IL ----- 0.8 Volt V IH 2.2 ----- ----- ----- 100 nS ----- ----- 100 nS ST @Minimum operating Voltage to be 0sec. ----- 1 0 m S Pb Free RoHS Conforming

Handling Notes for Crystal Oscillators 1. Shock & Drop  Vibration Do not inflict excessive shock and mechanical vibration that exceeds the norm, such as hitting or mistakenly dropping, when transporting and mounting on a board. There are cases when pieces of crystal break, and pieces that are used become damaged, and become inoperable. When a shock or vibration that exceeds the norm has been inflicted, make sure to check the characteristics. 4. Mounting Precautions Leaded Devices The special glass, located where the lead of the retainer base comes out, is aligned with the coefficient of thermal expansio n of the lead, If the glass is damaged and cracks appear, there may be cases in which performance deteriorates and it fails to operate. Consequently, when making the device adhere closely and applying solder, align the gap of the hole of the board with the gap of the lead and insert without excessive force. When making the device adhere closely to a through hole board and applying solder, be careful that the solder does not get in to the metal part of the retainer base and cause a short. Putting in an insulation spacer is one more method of preventing a short circuit. When the lead is mounted floating, fix it as far as possible so that contact with other parts and the breakage due to the fat igue, and the mechanical resonance of the lead will not occur. When the lead is bent and used, do not bend the lead directly from the base, separate it 0.5mm or more and then bend it. When bending, before attaching to the board, fix the place where the lead comes out in advance and attach it after bending so that a crack do es not occur in the glass part. Surface Mount Devices The lead of the device and the pattern of the board is soldered on the surface. Since extreme deformation of the board tears off the pattern, tears off the lead metal, cracks the solder and damages the sealed part of the device and there are cases in which performance deteriorates and operation fails, use it within the stipulated bending conditions. Due to the small cracks in the board resulting from mount ing, please pay sufficient attention when attaching a device at the position where the warping of the board is great. When using an automatic loading machine, as far as possible, select a type that has a small impact and use it while confirmin g that there is no damage. Surface mount devices are NOT flow soldering compatible. 5. Storage Condition Since the long hour high temperature and low temperature storage, as well as the storage at high humidity are causes of deter ioration in frequency accuracy and solderability. Parts should be stored in temperature range of -5 to +40C˚, humidity 40 to 60% RH, and avoid direct sunlight. Then use within 6 months. 2. Cleaning Since a crystal piece can be broken by resonance when a crystal device is cleaned by ultrasonic cleaning. Be careful when carrying out ultrasonic cleaning. 3. Soldering conditions Standard soldering iron conditions Reflow conditions (Example) To maintain the product reliability, please follow recommended conditions. Recommended reflow Conditions vary depending upon products. Please check with the respective specification for details. Soldering iron Time Crystal Oscillators 280˚C ~ 340˚C 3+1/−0sec. max Time(sec.) Temperature(˚C) Crystal Oscillators/TCXOs 120sec. max 10sec. max 200˚C min 40sec. max Peak:260 ˚C+0 -10 180 ˚C+0 -10

Handling Notes for Crystal Oscillators (1)The minlature crystal oscillator for the clock utillzes a C-MOS IC and incorporates a protective circuit against static elec tricity However, exerclse care in the same manner as for a normal C−MOS IC. (2)Internal capacitor is not provided in the power supply section (+DC−GNC). To serve as overimpressed voltage and overcurrent protective device, place a bypass capacitor (0.01 µF) as near as possible to the (+DC−GND) terminal. However, the capacity value is meant as a guideline. Depending on the capacitor type, frequency characteristics vary. Accordingly, use a capacitor that matches the frequency characteristics. (3)Applying reverse voltage could result in damage to internal parts. Take care not to connect terminals incorrectly. (4)Please do not use oscillators under unfavorable condition such as beyond specified range in catalog or specification sheet. (5)Please keep oscillators away from water, salt water or harmful gas. (6)K50H-3C / FSO series should be stored in humidity-controlled area after the package is unsealed, in temperature +25±5˚C under humidity of 65%RH, and should be mounted on PCB within 7 days. (7)K50H-3C / FSO series has Bypass Capacitior between VDD and GND. Test Circuits and Clock Timing Chart Note) Maximum load(Includes capacitances of fixture and probe) CMOS Output Test Circuits 6. In order to use crystal oscillators Clock Timing chart(C-MOS Output) LV-PECL Output Test Circuits Clock Timing chart (LV-PECL Output)

Tape & Reel Specifications ICrystal Oscillators Tape & Reel Specifications A B C D E F G H J L N O P Q R S U W Qty 2.0±0.1 4.0±0.1 φ1.55±0.1 8.0±0.1 7.5±0.1 1.75±0.1 16.0±0.3 φ1.55 8.18 5.56 2.16±0.1 0.3±0.05 φ330±2φ254±2 φ100±1 φ13±0.3 φ21±0.8 2.0±0.5 16.4 FSO-1C/1D FSO-2B/2C/2D VC-FSO-1D 2.0±0.1 4.0±0.1 φ1.55±0.1 8.0±0.1 7.5±0.1 1.75±0.1 16.0±0.3 φ1.55 8.18 5.56 2.16±0.1 0.3±0.05 φ330±2φ254±2 φ100±1 φ13±0.3 φ21±0.8 2.0±0.5 17.5±0.5/16.4 FXO-31F FXO-34F FXO-37F VC-FXO-35F VCXO-7050 2.0±0.1 4.0±0.1 φ1.5±0.1 8.0±0.1 7.5±0.1 1.75±0.1 16.0±0.2 φ1.55±0.1 7.4±0.1 5.4±0.1 2.0±0.1 0.3±0.05 φ180+0/-3 φ60+1/−0 φ13±0.2 φ21±0.8 2.0±0.5 17±0.2 1000 K50H K50 K53 K50V-3P 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 4.0±0.1 3.5±0.1 1.75±0.1 8.0±0.3 φ1.5+0.1/−0 3.5±0.1 2.8±0.1 1.1±0.1 0.25±0.05 φ180±2 φ60 φ13±0.2 φ21±0.8 2.0±0.5 9.0±0.1 2000 KT21 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 4.0±0.1 3.5±0.05 1.75±0.1 8.0±0.2 φ1.0+0.2/−0 3.6±0.1 2.9±0.1 1.3±0.1 0.3±0.05 φ180+1/−1.5 φ60+1/−0 φ13±0.2 φ21±0.8 2.0±0.5 9.0+0.3/−0 2000 (VC)TCXO-214C 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 4.0±0.1 5.5±0.1 1.75±0.1 8.0±0.3/12.0±0.3 φ1.5+0.1/−0 4.4±0.1 2.9±0.1 1.1±0.1/1.3±0.1 0.2±0.05/0.3±0.05 φ254±1/φ180+1/−1.5 φ100±1/φ60+1/−0 φ13±0.2 φ21±0.8 2.0±0.5 9.0±0.3/13.0+0.3−0 (VC)TCXO-212C 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 8.0±0.1/4.0±0.1 5.5±0.1 1.75±0.1 12.0±0.3 φ1.5+0.1/−0 5.5±0.1 3.7±0.1 1.6±0.1/1.5±0.1 0.3±0.05 φ330±1 φ100±1/φ60 φ13±0.2 φ21±0.8 2.0±0.5 13.5±1 2000 (VC)TCXO-208C MFO-208F KT18B 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 8.0±0.1/4.0±0.1 5.5±0.1 1.75±0.1 12.0±0.3 φ1.5+0.1/−0 5.5±0.1 3.7±0.1 1.6±0.1/1.5±0.1 0.3±0.05 φ330±1 φ100±1φ60 φ13±0.2 φ21±0.8 2.0±0.5 13.5±1 4000 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 8.0±0.1 5.5±0.1 1.75±0.1 12.0±0.3 φ1.5+0.1/−0 5.5±0.1 3.7±0.1 1.8±0.1 0.3±0.05 φ330±1 φ100±1 φ13±0.2 φ21±0.8 2.0±0.2 13.5±1 4000 KT20A 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 4.0±0.1 7.5±0.1 1.75±0.1 16.0±0.3 φ1.5+0.1/−0 7.4±0.1 5.4±0.1 2.1±0.1 0.3±0.05 φ254±2 φ100±1 φ13±0.2 φ21±0.8 2.0±0.5 17.5±0.5 1000 (VC)TCXO-204C A B C D E F G H J L N O P Q R S U W Qty 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 4.0±0.1 3.5±0.05 1.75±0.1 8.0±0.2 φ1.1±0.1 2.7±0.1 2.2±0.1 1.25±0.1 0.2±0.05 φ180+0/−3 φ60+1/−0 φ13±0.2 φ21±0.8 2.0±0.5 9.0±0.3 2000 KC2520 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 8.0±0.1 3.5 ±0.05 1.75±0.1 8.0±0.2 φ1.55±0.1 3.5±0.05 2.8±0.05 1.1±0.05 0.3±0.05 φ180+0/−3 φ60+1/−0 φ13±0.2 φ21±0.8 2.0±0.5 9.0±0.3 2000 K25 2.0±0.1 4.0±0.1 φ1.5+0.1/−0 8.0±0.1 5.5±0.1 1.75±0.1 12.0±0.2 φ1.55±0.1 5.5±0.1 3.7±0.1 1.4±0.1 0.3±0.05 φ180+0/−3 φ60+1/−0 φ13±0.2 φ21±0.8 2.0±0.5 13.0±0.3 1000 K30 2.0±0.1 4.0±0.1 φ1.55±0.1 8.0±0.1 5.5±0.1 1.75±0.1 12.0±0.3 φ1.55±0.1 5.4±0.1 3.6±0.1 1.7±0.1 0.3±0.05 φ254±2 φ100±1 φ13±0.5 φ21±0.8 2.0±0.5 13.4+2/-0 1000 FXO-61F FXO-64F VC-FXO-65F Feed direction T A P E R E E L T A P E R E E L

Ordering Format for Crystal Oscillatiors ORDERING FORMAT FOR CRYSTAL OSCILLATORS Please specify the following items when ordering crystal oscillators. I. Standard products shown in the catalogue: Please specify package type and nominal frequency. II. Special-order products: Please specify the following items in specification. 1 . Frequency 2 . Frequency Stability MAX./year 3 . Frequency Tuning Range MIN 4 . Frequency Control Range 5 . Output (2)Wave Form 6 . Supply Voltage 7 . Environmental Condition (2)Vibration