K50BCLXYXPQ

K50_V11 BANNER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Daylight-Visible, General-Purpose Indicators for Indoor or Outdoor Use To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring, see www.bannerengineering.com.

• Intense levels of light output for areas with high ambient light - even outdoors
• Viewable around entire perimeter; some models also emit light from top
• 1- or 2-, or 3-color models available
• Rugged, sealed thermoplastic housing rated for IEC IP67 and IP69K per DIN 40050-9
• Bright, even light
• 12 V dc to 30 V dc or 85 V ac to 130 V ac (75 V dc to 120 V dc) or 100 V ac to 250 V ac (90 V dc to 240 V dc) operation, depending on model
• 12 V dc operation useful for applications on mobile vehicles
• Consult factory for models with strobing capability WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models Model LED Color(s)1 Input Supply Voltage Connection2 Perimeter View Only Perimeter + Top View K50BLXGXPQ K50BCLXGXPQ Green PNP 12 V to 30 V dc 4-pin M12/Euro-style integral quick disconnect K50BLXRXPQ K50BCLXRXPQ Red K50BLXYXPQ K50BCLXYXPQ Yellow K50BLXBXPQ K50BCLXBXPQ Blue K50BLXWXPQ K50BCLXWXPQ White K50BLGRXPQ K50BCLGRXPQ Green / Red K50BLGRYPQ K50BCLGRYPQ Green / Red / Yellow PNP 12 V to 30 V dc 5-pin M12/Euro-style integral quick disconnect3K50BLGRYNQ K50BCLGRYNQ Green / Red / Yellow NPN 12 V to 30 V dc K50BLGA120Q K50BCLGA120Q Green AC 85 V to 130 V ac 3-pin A12/Micro-style integral quick disconnect K50BLRA120Q K50BCLRA120Q Red K50BLYA120Q K50BCLYA120Q Yellow K50BLBA120Q K50BCLBA120Q Blue K50BLWA120Q K50BCLWA120Q White K50BLGA230Q K50BCLGA230Q Green AC 100 V to 250 V ac K50BLRA230Q K50BCLRA230Q Red K50BLYA230Q K50BCLYA230Q Yellow K50BLBA230Q K50BCLBA230Q Blue 1 Available colors include: Green (G), Red (R), Yellow (Y), Blue (B) and White (W). 2 Integral quick disconnect models are listed.
• To order the 150 mm (6 in) PVC cable model with a M12/Euro-style quick disconnect, replace the suffix "Q" with "QP" in the model number. For example, K50BLXGXPQP.
• To order the 2 m (6.5 ft) PVC cable model, omit the suffix "Q" in the model number. For example, K50BLXGXP.
• Models with a quick disconnect require a mating cordset. 3 3-color models use a 4-pin mating cable, see wiring diagram. EZ-LIGHT® K50 Beacon Original Document 155509 Rev. M

26 February 2019

Wiring Diagrams — DC Models Table 1: 1-Color Models (PNP/NPN Selectable) PNP C + 12-30V dc1 2 X X NPN C _12-30V dc 2 X X Pinout Key: 1 = Brown 2 = White 3 = Blue 4 = Black C1 = Indicator color 1 X = Not used Table 2: 2-Color Models PNP 12-30V dc 2 X Pinout Key: 1 = Brown 2 = White 3 = Blue 4 = Black C1 = Indicator color 1 C2 = Indicator color 2 X = Not used Table 3: 3-Color Models PNP 12–30 V dc NPN 12–30 V dc Pinout Key: 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray C1 = Indicator color 1 C2 = Indicator color 2 C3 = Indicator color 3 X = Not used Wiring Diagrams — AC Models Quick-Disconnect Wiring Key:2 1 = Green (not used) 2 = Red/Black 3 = Red/White Cabled Wiring Key:3 1 1 = Black 3 = White Pinout EZ-LIGHT® K50 Beacon 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 155509 Rev. M

Supply Voltage and Current - 12 V dc to 30 V dc models K50BL 1-color models: 140 mA max. at 12 V dc, 70 mA max. at 30 V dc K50BCL 1-color models: 160 mA max. at 12 V dc, 80 mA max. at 30 V dc K50BL 2-color models, per color: 75 mA max. at 12 V dc, 40 mA max. at 30 V dc K50BCL 2-color models, per color: 95 mA max. at 12 V dc, 40 mA max. at

30 V dc

K50BL 3-color models, per color: 85m A at 12 V dc, 55 mA at 30 V dc K50BCL 3-color models, per color: 110 mA at 12 V dc, 65 mA at 30 V dc Supply Voltage and Current - 120 V ac models K50BL models: 85 V ac to 130 V ac or 75 V dc to 120 V dc at 16 mA max. 50/60 Hz K50BCL models: 85 V ac to 130 V ac or 75 V dc to 120 V dc at 60 mA max. 50/60 Hz Supply Voltage and Current - 230 V ac models K50BL models: 100 V ac to 250 V ac or 90 V dc to 240 V dc at 20 mA max.

50 Hz to 60 Hz

K50BCL models: 100 V ac to 250 V ac or 90 V dc to 240 V dc at 25 mA max. 50 Hz to 60 Hz Supply Protection Circuitry

12 V dc to 30 V dc models: Protected against reverse polarity and transient

120 V ac and 230 V ac models: Protected against transient voltages

LED colors are independently selected, depending on model For 3-color models: only one color can be on at a time. The higher color number overrides the lower color number. Environmental Rating Rated IEC IP67 and IP69K per DIN 40050-9 NEMA/UL Type 4X, 13 Application Note Light emits 360° from housing sides in K50BL models and housing sides and tops in K50BCL models. LIGHT DIRECTION LIGHT DIRECTION Certifications dc models only Construction Base and covers: polycarbonate Connections Integral 4-pin M12/Euro-style (dc models) QD, 3-pin Micro-style (ac models) QD, or 2 m (6.5 ft) integral cable, depending on model Operating Conditions 90% at +50 °C maximum relative humidity (non-condensing) Vibration and Mechanical Shock All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06 in, maximum acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration, half sine wave. Indicator Power-up Response Time DC 1, and 2- color models ON: 10 ms; OFF: 7 ms DC 3-color models ON: 250 ms; OFF: 10 ms AC models ON/OFF: 500 µs Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Dimensions M12 M30 x 1.5(mounting nut included)Max. torque 4.5 Nm (40 in.-lbs) 501.97[ ] 49[1.93] 11[.43] 29[1.14] Internal Threads1/2 - 14 NPSMMax. torque 2.25 Nm (20 in.-lbs) EZ-LIGHT® K50 Beacon P/N 155509 Rev. M www.bannerengineering.com - Tel: + 1 888 373 6767 3

4-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) 3-Pin Micro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-306 1.83 m (6 ft) Straight 42 Typ. ø 14.51/2-20 UNF-28 1 = Green 2 = Red/Black 3 = Red/White MQDC-315 4.57 m (15 ft) MQDC-330 9.14 m (30 ft) MQDC-306RA 1.83 m (6 ft) Right-Angle

32 Typ

28 Typ

ø 14.5 1/2-20 UNF-28 MQDC-315RA 4.57 m (15 ft) MQDC-330RA 9.14 m (30 ft) Mounting Brackets All measurements are listed in millimeters, unless noted otherwise. SMB30A

• Right-angle bracket with curved slot for versatile orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor
• 12-ga. stainless steel 69 AB C Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5 SMB30FA
• Swivel bracket with tilt and pan movement for precise adjustment
• Mounting hole for 30 mm sensor
• 12-ga. 304 stainless steel
• Easy sensor mounting to extrude rail T-slot
• Metric and inch size bolt available AB 68.936.3 83.2 Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50 Hole size: B= ø 30.1 EZ-LIGHT® K50 Beacon 4 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 155509 Rev. M

• 12-ga. stainless steel bracket with curved mounting slots for versatile orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor A BC Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1 SMB30SC
• Swivel bracket with 30 mm mounting hole for sensor
• Black reinforced thermoplastic polyester
• Stainless steel mounting and swivel locking hardware included B A Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0 LMBE12RA35
• Direct mounting of stand-off pipe, with common bracket type
• Zinc-plated steel
• 1/2-14 NPSM nut
• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm Hole center spacing: 20.0 38.25 2X Ø9 1/2 - 14 NPSM NUT 5535 LMBE12RA45
• Direct mounting of stand-off pipe, with common bracket type
• Zinc-plated steel
• 1/2-14 NPSM nut
• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm Hole center spacing: 35.0 38.25 6545 2X Ø11 1/2 - 14 NPSM NUT Elevated Mount System Model Features Components SA-M30E12 - Black Acetal
• Streamlined black acetal stand-off pipe adapter/ cover
• Connects between 30 mm light base and ½ in. NPSM/DN15 pipe
• Mounting hardware included Polished 304 Stainless Steel Black Anodized Aluminum Clear Anodized Aluminum
• Elevated-use stand-off pipe (½ in. NPSM/DN15)
• Polished 304 stainless steel, black anodized aluminum, or clear anodized aluminum surface
• ½ in. NPT thread at both ends
• Compatible with most industrial environments SOP-E12-150SS 150 mm (6 in) long SOP-E12-150A 150 mm (6 in) long SOP-E12-150AC 150 mm (6 in) long SOP-E12-300SS 300 mm (12 in) long SOP-E12-300A 300 mm (12 in) long SOP-E12-300AC 300 mm (12 in) long SOP-E12-900SS 900 mm (36 in) long SOP-E12-900A 900 mm (36 in) long SOP-E12-900AC 900 mm (36 in) long SA-E12M30 - Black Acetal
• Streamlined black acetal mounting base adapter/ cover
• Connects between ½ in. NPSM/DN15 pipe and 30 mm (1-3/16 in) drilled hole
• Mounting hardware included Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. EZ-LIGHT® K50 Beacon P/N 155509 Rev. M www.bannerengineering.com - Tel: + 1 888 373 6767 5

FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the manufacturer. EZ-LIGHT® K50 Beacon © Banner Engineering Corp. All rights reserved