K50

K50 BANNER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

50 mm Programmable Multicolor RGB Indicator with Independent Momentary or Latching Touch Button Output Standard Model

• Excellent immunity to false triggering by water spray, detergents, oils, and other foreign materials
• Programmable using Banner's Pro Editor software and Pro Converter Cable
• Vibration feedback models available for an unmistakable touch confirmation
• Up to 14 default colors with flash input in one unit
• Devices are completely self-contained—no controller needed
• Rated IEC IP67 and IP69K per DIN 40050-9
• Ergonomically designed to eliminate hand, wrist, and arm stresses associated with repeated switch operation; no physical force required to operate
• 12 V dc to 30 V dc operation
• Can be actuated with bare hands or gloves; adjustable sensitivity using Pro Editor software
• Compact models available for lower profile applications
• Models constructed from FDA-grade materials available
• Configurable input/output with Pro Editor software
• Device can be configured to remember touch state on power loss using Pro Editor software Compact Model WARNING:
• Do not use this device for personnel protection
• Using this device for personnel protection could result in serious injury or death.
• This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de- energized (off) output condition. Models Family K50 GRY3 = Programmable Multicolor (3 Color, 5-Pin) RGB14 = Programmable Multicolor (14 colors, 8-Pin) Color/Control P = Pro Q** = 5-pin or 8-pin integral M12/Euro-style quick disconnect, depending on model QP = 150 mm (5.9 in) PVC cable with 5-pin or 8-pin M12/Euro-style quick disconnect, depending on model QP Connector * Not available in FDA-grade material or with vibration feedback ** Not available in FDA-grade material Models with a quick disconnect require a mating cordset M = Momentary L = Latching Output Function Activation Method T = Touch TF = Touch, FDA-grade Housing C = Compact* Blank = Standard Dome Output State A = Normally Open P T C A M GRY3 Blank = 2 m PVC cable Style TV = Touch, Vibration Feedback TFV = Touch, FDA-grade, Vibration Feedback Pro Editor Use Banner's Pro Editor software and Pro Converter Cable to create custom configurations by selecting different colors, flash patterns, and animations. For more information visit www.bannerengineering.com/proeditor. K50 Pro Touch Button Original Document 207477 Rev. D

21 August 2019

For the Vibration Feedback models, for all touch conditions, the default Vibration Feedback is On and the type of vibration feedback is Steady. GRY3 Models NPN PNP Key 12-30V dc Load 12-30V dc Load Pin 1 = Brown Pin 2 = White* Pin 3 = Blue Pin 4 = Black Pin 5 = Gray Touch toggles output *Can be configured as an output using Pro Editor software Table 1: GRY3 Multicolor Color/Function Definition Green Yellow Red Input 1 X X Input 2 X X RGB14 Models NPN PNP Key Load 12-30V dc Flash Input 7 – Load 12-30V dc Flash Input Pin 1 = White Pin 2 = Brown Pin 3 = Green Pin 4 = Yellow Pin 5 = Gray* Pin 6 = Pink Pin 7 = Blue Pin 8 = Red Touch toggles output *Can be configured as an output using Pro Editor software Table 2: RGB Multicolor Color/Function Definition Red Yellow Green Cyan Blue Magenta White Amber Rose Lime Green Orange Sky Blue Violet Spring Green Input 1 X X X X X X X Input 2 X X X X X X X Input 3 X X X X X X X Input 4 X X X X X X X K50 Pro Touch Button 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 207477 Rev. D

Specifications Supply Voltage

12 V dc to 30 V dc

175 mA maximum current at 12 V dc (exclusive of load) 93 mA maximum current at 24 V dc (exclusive of load) 82 mA maximum current at 30 V dc (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Leakage Current Immunity 400 µA Output Rating Maximum load: 150 mA ON-state saturation voltage: < 2 V dc at 10 mA; <2.5 V dc at 150 mA OFF-state leakage current: <10 µA at 30 V dc Pro Editor Configuration Connection to Pro Editor software enables control of:

• Animation: Steady, Flash, Two Color Flash, 50/50, 50/50 Rotate, Chase, Intensity Sweep, Demo
• Color: Green, Red, Yellow, Blue, White, Cyan, Magenta, Amber, Rose, Lime Green, Orange, Sky Blue, Violet, Spring Green
• Intensity: Low, Medium, High
• Speed: Slow, Standard, Fast
• Output State: Normally Open, Normally Closed, Momentary, Latching, On Delay, Off Delay, Remember Touch State on Power Loss Vibration Feedback: On, Pattern, Off
• Touch Sensitivity: Low, Standard, High
• Logic Type: Three State Advanced Control (F2 Mode), Seven State Advanced Control (F2 Mode), Four State Full Logic (Custom)
• One pin configurable as either an input or an output Pro Converter Cable required to interface between PC and indicator, see accessories Output Response Time Power-Up Delay: 500 milliseconds maximum Input Response: 40 milliseconds maximum Output Response: 300 milliseconds maximum Touch Dwell Time If touch dwells for longer than 60 seconds, the output will revert to the untouched state Vibration Feedback Characteristics Max Total On-Time Per Touch: 3 seconds Mechanical Life: 500,000 cycles For all touch conditions, the default Vibration Feedback is On and the type of vibration feedback is Steady Operating Conditions Humidity: 90% at +50 °C maximum relative humidity (non-condensing) Environmental Rating Standard Models: IEC IP67, IP69K per DIN 40050-9 Cabled models also meet IP69K per DIN 40050-9 if the cable and cable entrance are protected from high-pressure spray FDA Models: IEC IP67, IP69K per DIN 40050-9 Mounting M30 × 1.5 threaded base, maximum torque 4.5 N·m (40 in·lbf) Construction Standard Model Base, Dome, and Nut: Polycarbonate FDA Model Base, Dome, and Nut: FDA-grade copolyester Default Indicator Characteristics Color Dominant Wavelength (nm)or Color Temperature (CCT) Color Coordinates1 Lumen Output (Typical at 25 °C)2x y Green 522 0.154 0.700 16.5 Red 620 0.689 0.309 8.3 Yellow 576 0.477 0.493 23.8 Blue 466 0.140 0.054 4.6 White 5700K 0.328 0.337 25.1 Cyan 493 0.170 0.340 18.4 Magenta – 0.379 0.172 11.1 Amber 589 0.556 0.420 15.7 Rose – 0.515 0.220 9.1 Lime Green 562 0.388 0.561 21.4 Sky Blue 486 0.155 0.247 19.5 Orange 599 0.616 0.370 12.1 Violet – 0.217 0.089 9.7 Spring Green 508 0.177 0.536 17.0 Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave) Connections 5-pin or 8-pin integral M12/Euro-style quick disconnect, 2 m (6.5 ft) integral PVC cable, or 5-pin or 8-pin 150 mm (5.9 inch) PVC cable with a M12/Euro- style quick disconnect, depending on model Models with a quick disconnect require a mating cordset Storage Certifications Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 1 Refer to the CIE 1931 (x,y) Chromaticity Diagram to show equivalent color with indicated color coordinates. Actual coordinates may differ ± 5%. 2 Values shown apply to dome models only. Compact models are 20% lower. K50 Pro Touch Button P/N 207477 Rev. D www.bannerengineering.com - Tel: + 1 888 373 6767 3

Ø50 mm [1.97”] 66 mm [2.6”] 55 mm [2.17”] 35 mm [1.38”] M30 x 1.5 M12 x 1 Compact Models 17 mm [0.67”] 37.0 mm [1.46”] 48.0 mm [1.89”] Ø50 mm [1.97”] All measurements are listed in millimeters [inches], unless noted otherwise. Accessories Pro Editor Hardware MQDC-506-USB

• Pro Converter Cable
• 1.83 m (6 ft) M12/Euro-style quick disconnect to Device and USB to PC
• Required for connection to Pro Editor CSB-M1251FM1251M
• 5-pin parallel Y splitter (Male- Male-Female)
• For full Pro Editor preview capability
• Requires external power supply, sold separately PSW-24-1
• 24 V dc, 1 A power supply
• 2 m (6.5 ft) PVC cable with M12/ Euro-style quick disconnect
• Provides external power with splitter cable, sold separately ACC-PRO-CABLE5
• Mating accessory for cabled and terminal models
• 150 mm (6 inch) PVC cable with M12/Euro-style quick disconnect
• Lever wire nuts included (qty 5)
• Required to connect cabled models to Pro Converter Cable, sold separately MQDC-801-5M-PRO
• 8-pin to 5-pin double-ended cordset
• 0.31 m (1 ft) PVC cable with M12/ Euro-style quick disconnects
• Required to connect 8-pin Pro Series-enabled devices to Pro Converter Cable (MQDC-506- USB), sold separately Cordsets 5-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.50 m (1.5 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) K50 Pro Touch Button 4 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 207477 Rev. D

5-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-506RA 1.83 m (6 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 4.57 m (15 ft) MQDC1-530RA 9.14 m (30 ft) 5-Pin Threaded M12/Euro-Style Washdown Stainless Steel Cordsets—Double Ended Model Length Style Dimensions Pinout (Female) MQDC-WDSS-0506 1.83 m (6 ft) Straight 43.5 mm Ø4.8 mm Ø15.5 mm 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC-WDSS-0515 4.57 m (15 ft) MQDC-WDSS-0530 9.14 m (30 ft) 8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield Model Length Style Dimensions Pinout (Female) MQDC2S-806 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red MQDC2S-815 4.57 m (15 ft) MQDC2S-830 9.14 m (30 ft) MQDC2S-850 15.2 m (50 ft) MQDC2S-806RA 1.83 m (6 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC2S-815RA 4.57 m (15 ft) MQDC2S-830RA 9.14 m (30 ft) MQDC2S-850RA 15.2 m (50 ft) 8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield—Washdown, Stainless Steel Model Length Style Dimensions Pinout (Female) MQDC-WDSS-0806 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 5 MQDC-WDSS-0815 4.57 m (15 ft) K50 Pro Touch Button P/N 207477 Rev. D www.bannerengineering.com - Tel: + 1 888 373 6767 5

8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield—Washdown, Stainless Steel Model Length Style Dimensions Pinout (Female) MQDC-WDSS-0830 9.14 m (30 ft) 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red Brackets SMB30A

• Right-angle bracket with curved slot for versatile orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor
• 12-ga. stainless steel A B C Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5 SMB30FA
• Swivel bracket with tilt and pan movement for precise adjustment
• Mounting hole for 30 mm sensor
• 12-ga. 304 stainless steel
• Easy sensor mounting to extrude rail T-slot
• Metric and inch size bolt available A B 68.936.3 83.2 Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50 Hole size: B= ø 30.1 SMB30FVK
• V-clamp, flat bracket and fasteners for mounting to pipe or extensions
• Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions
• 30 mm hole for mounting sensors 118 A Hole size: A= ø 31 SMB30MM
• 12-ga. stainless steel bracket with curved mounting slots for versatile orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor A B C Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1 SMB30RAVK
• V-clamp, right-angle bracket and fasteners for mounting sensors to pipe or extrusion
• Clamp accommodates 28 mm dia. tubing or 1 in. square extrusions
• 30 mm hole for mounting sensors A Hole size: A = ø 30.5 SMB30SC
• Swivel bracket with 30 mm mounting hole for sensor
• Black reinforced thermoplastic polyester
• Stainless steel mounting and swivel locking hardware included B A Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0 SMBAMS30P
• Flat SMBAMS series bracket
• 30 mm hole for mounting sensors
• Articulation slots for 90°+ rotation
• 12-ga. 300 series stainless steel 93 A C B Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0 SMBAMS30RA
• Right-angle SMBAMS series bracket
• 30 mm hole for mounting sensors
• Articulation slots for 90°+ rotation
• 12-ga. (2.6 mm) cold-rolled steel A C B Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0 K50 Pro Touch Button 6 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 207477 Rev. D

• Touch cover Ø A B Diameter: A = 67 mm Height: B = 42.5 mm Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the manufacturer. K50 Pro Touch Button © Banner Engineering Corp. All rights reserved