P4KE6.8 TSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

/cuspopen UL Recognized File # E-96005 /cuspopen Plastic package has Underwr iters Laboratory Flammability Classification 94V-0 /cuspopen 400W surge capability at 10 x 100us waveform, duty cycle: 0.01% /cuspopen Excellent clamping capability /cuspopen Low zener impedance /cuspopen Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional /cuspopen Typical I R less than 1 uA above 10V /cuspopen High temperature soldering guaranteed: 260°C / 10 seconds / .375”,(9.5mm) lead length / 5lbs.,(2.3kg) tension Mechanical Data /cuspopen Case: Molded plastic /cuspopen Lead: Axial leads, solderable per MIL-STD- 202, Method 208 /cuspopen Polarity: Color band denotes cathode except bipolar /cuspopen Weight: 0.012 ounce,0.3 gram DO-41 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol Value Units Peak Power Dissipation at TA=25°C, Tp=1ms (Note 1) PPK Minimum 400 Watts Steady State Power Dissipation at TL=75°C Lead Lengths .375”, 9.5mm (Note 2) PD 1.0 Watts Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) IFSM 40.0 Amps Maximum Instantaneous Forward Voltage at 25.0A for Unidirectional Only (Note 4) VF 3.5 / 6.5 Volts Operating and Storage Temperature Range TJ, TSTG -55 to + 175 °C Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2. Notes: 3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minutes Notes: 3. Maximum. Devices for Bipolar Applications Notes: 1. For Bidirectional Use C or CA Suffix for Types P4KE6.8 thru Types P4KE440. Notes: 2. Electrical Characteristics Apply in Both Directions.

  • 629 - RATINGS AND CHARACTERISTIC CURVES (P4KE SERIES) FIG.2- PULSE DERATING CURVE PEAK PULSE POWER (Ppp) or CURRENT DERATING IN PERCENT AGE, % IPPM 0 25 50 75 100 125 150 175 200 100 T AMBIENT TEMPERATURE, CA, o FIG.5- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY l , PEAK FOR WARD SURGE CURRENT AMPERES FSM 1 2 4 6 8 10 20 100 40 60 80 NUMBER OF CYCLES AT 60Hz Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method FIG.1- PEAK PULSE POWER RATING CURVE P , PEAK PULSE POWER, KW PPM 0.1/c109s 10ms1.0ms/c49/c48/c48/c109s/c49/c48/c109s/c49/c46/c48/c109s 0.1 100 tp, PULSE WIDTH, sec. NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TJ=25 C FIG.3- PULSE WAVEFORM PEAK PULSE CURRENT 0 1.0 2.0 3.0 4.0 100 150 t, TIME, ms PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of l PPM td tr=10 sec./c109 10/1000 sec. WAVEFORM as DEFINED by R.E.A. PEAK VALUE lPPM HALF VALUE- lPPM FIG.7- TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL C , JUNCTION CAP ACITANCE.(pF) J 1 10 100 200 1,000 10,000 100 100,000 V , BREAKDOWN VOLTAGE. VOLTS(BR) Tj=25 C f=1.0MHz Vsig=50mVp-p MEASURED at ZERO BIAS MEASURED at STAND-OFF VOLTAGE, V WM TL, LEAD TEMPERATURE, C o FIG.4- STEADY STATE POWER DERATING CURVE PM , STEADY STATE POWER DISSIP ATION, WATTS (AV) 0 25 50 75 100 125 150 175 200 0.25 0.50 0.75 1.00 60Hz RESISTIVE OR INDUCTIVE LOAD 1.6 X 1.6 X .040" (40 X 40 X 1mm.) COPPER HEAT SINKS L=0.375"(9.5mm) LEAD LENGTHS V , BREAKDOWN VOLTAGE. VOLTS(BR) FIG.6- TYPICAL REVERSE LEAKAGE CHARACTERASTICS l , INSTANTANEOUS REVERSE LEAKAGE CURRENT , MICROAMPERES D 0 100 200 300 400 500 0.01 0.1 100 MEASURED AT DEVICES STAND-OFF VOLTAGE, V WM TJ=25 C0
  • 630 - ELECTRICAL CHARACTERISTICS (TA=25OC unless otherwise noted) Test Stand-Off Maximum Maximum Maximum Maximum Device Nominal Current Voltage Reverse Leakage Peak Pulse Clamping Temperature Voltage @IT VWM at VWM Current IPPM Voltage at IPPM Coefficient (Volts) Min Max (mA) (Volts) I D (uA) (Note 2)(Amps) V C(Volts) of V BR(% / OC) Breakdown Voltage VBR (Volts) (Note 1) Notes: 1. VBR measured after IT applied for 300us, IT=square wave pulse or equivalent. 2. Surge current waveform per Figure 3 and derate per Figure 2. 3. For bipolar types having VWM of 10 volts and under, the ID limit is doubled. 4. All terms and symbols are consistent with ANSI/IEEE C62.35.