K3DB1ENJ-21T1T2994 OTTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
SEALED, ILLUMINATED ROCKER SWITCHES SEALED ROCKERS
68 OTTO CONTROLS • 2005 Full Line Catalog Specifications Subject T o Change Without Notice
ATTRACTIVE AND RUGGED FOR WET AND DUSTY ENVIRONMENTS The OTTO K3 series is a q uality, precision switch designed to comply with standards established for appliance, marine (ignition protection) and off-road vehicles along with other demanding applications where rugged rocker switches are required. K3 series sealed rocker switches snap into industry-standard panel cutouts. Choose illuminated and printed legends, thru-panel drain option, and switching compatibility from low level to 20 amps. The K3 series offers a choice of LED, incandescent and neon illumination. Legends can be stamped onto a non-illuminated button, stamped onto an illuminated lens,o r laser etched into the lens and backlit. Available in st andard and low level co ntact ratings, the K3 rockers will fit a wide range of applications.E x p e c t a minimum of 25,000 cycles at a full r a t e d l o a d o f 2 0 amps resistive or 15 amps inductive. 100,000 cycles are possible at low level loads. A full complement of switch operation is available including momentary and maintained action in 2- or 3-position switches in SPST , SPDT , SPTT, DPST, and DPDT circuit arrangements. OTTO can provide custom colors upon request. Value-added assemblies with wire leads are also available. Please consult the factory for assistance. Quality Features:
- Submersible, sealed watertight per IP68
- S nap-in panel mounting into industry standard panel cutout
- O ptional panel seal gasket
- Thru-panel drain option
- L ED,n eon and incandescent lighting
- . 2 5 0" Q.C. terminals
- O ptional one-piece connector
- O p t ional terminal barriers
- L ow level to 20 amp switch Standard Characteristics/Ratings: OPERATIONAL: Mechanical Life: 100,000 cycles, minimum Seal: Water tight . Submersible to IP68 Operating Temperature Range: -40°C to +85°C Button/Case: Thermoplastic. Mounting: Snap-In from front into industry standard panel cutout Contacts: Silver Alloy. Gold flash for low level Ter minals: Brass 1/4" Q.C. Standard Light Source: 6V,12V,2 4V Incandescent; 125V , 250V Neon; 2V , 6V , 12V , 24V red, green, amber LED ELECTRICAL: LOAD CURRENT RATING LIFE Type 12V & 28V 110VAC (Min.) Resistive 20A1 6A 25,000 cycles Inductive1 5A 15A2 5,000 cycles Lamp 5A 5A 25,000 cycles Motor Load: 1/2 HP at 1 10 VAC Dielectric Withstand: 1050 Vrms except across light terminals Compliance Standards (Pending): EN61508-1 for appliance switches UL1054 for special use switches UL 1500 for ignition protection of marine products SAE J1455 for heavy duty trucks
SEALED, ILLUMINATED ROCKER SWITCHES SEALED ROCKERS Specifications Subject T o Change Without Notice OTTO CONTROLS • www.ottoeng.com 69 ROCKER SWITCHES SNAP-IN PANEL MOUNTING Standard Legends Per SAE Specifications For legends not shown, please consult an OTTO representative.
SEALED, ILLUMINATED ROCKER SWITCHES SEALED ROCKERS
70 OTTO CONTROLS • 2005 Full Line Catalog Specifications Subject T o Change Without Notice
Terminal Style/ Bezel and Actuator Switch Action/Circuit Light Source Light Switch Rating/Plating Color and Case Style Position Position Position Type Circuit A. Without T erminal Barriers/ A Black Rocker and Bezel 1A ON NONE OFF SPST A. No Illumination A. No Light Standard Rating/Silver Plating with Drain Holes 2A ON NONE OFF DPST B. 6V Incandescent B. Dep. in "A" & Connector Keying Pin/ without Drain Holes 2B ON NONE ON DPDT D. 24V Incandescent D. Ind. in "A" Standard Rating/Silver Plating C. Red Rocker and Bezel 1C MOM-ON NONE OFF SPST E. 125 VAC Neon E. Ind. in "C" C. With Terminal Barriers/ with Drain Holes 2C MOM-ON NONE OFF DPST F . 250 VAC Neon F . Dep. in "A" & "C" Low Level Rating/Gold Plating E. White Rocker and Bezel 1E MOM-ON OFF MOM-ON SPDT J. 2V Amber LED J. Ind. in "A" & "C" E. Without T erminal Barriers & with Drain Holes 2E MOM-ON OFF MOM-ON DPDT K. 6V Red LED Connector Keying Pin/Low F . White Rocker and Bezel 1F ON OFF ON SPDT L. 6V Green LED Level Rating/Gold Plating without Drain Holes 2F ON OFF ON DPDT M. 6V Amber LED F. Wi t h Ter minal Barriers/Low 1G MOM-ON OFF ON SPDT N. 12V Red LED Level Rating/Gold Plating 2G MOM-ON OFF ON DPDT P . 12V Green LED G. Without T erminal Barriers/ 1H ON ON OFF SPDT Q. 12V Amber LED Standard Rating/No Plating 1J ON ON NONE SPDT R. 24V Red LED H. Without T erminal Barriers & 2J ON ON NONE DPDT S. 24V Green LED Connector Pin/Standard Rating/ 1K MOM-ON ON OFF SPDT T . 24V Amber LED No Plating 1L M OM-ON ON NONE SPDT J. With Terminal Barriers/Standard 2L MOM-ON ON NONE DPDT Rating/No Plating 1M ON ON ON SPTT 1N MOM-ON ON ON SPTT 1P MOM-ON ON MOM-ON SPTT 2R ON/ON OFF/ON OFF/OFF DPDT 2S MOM-ON/ON OFF/ON OFF/OFF DPDT K3 Series PART K3 X X XX X X Stop Herefor unlighted switches without legends. The switch you have specified will be supplied with a rocker button without lenses and without legends. Example: K3AA1FAA NOTE: Silver Plating for Soldering Panel cut out dimensions are for reference only. Differences in panel material and thickness may require changes to the panel cut out for optimum fit.
SEALED, ILLUMINATED ROCKER SWITCHES SEALED ROCKERS Specifications Subject T o Change Without Notice OTTO CONTROLS • www.ottoeng.com 71 ATTRACTIVE AND RUGGED FOR WET & DUSTY ENVIRONMENTS Part Numbering Example: K3DB1ENJ-21T1T2994 Switch Description K3 rocker switch for low level switching, without terminal barriers featuring a black rocker and bezel without drain holes in a SPDT, Mom On – Off – Mom On circuit arrangement with 12VDC red LEDs lit independently in both positions Switch Description Green lens in Position Aa n d a Red lens in Position C are respectively pad-printed with Rabbit Legend in Position A Tu r t le legend in Position B both in white with the legends rotated 270° so that the switch can be mounted in the panel vertically with the Rabbit at the top of the switch D B N J NUMBER ING CODE - X X XX XX X X X Lens ColorL egend Style Legend Color Legend Position Posit ion Position Position Position Position Rotation 2. T ransparent Green 2. Transparent Green 2. Black 2. Black 4. Clear 4. Clear B. BackLit/ B. Backlit/ 5. T ranslucent White 5. T ranslucent White Daylight Daylight 3. 180° Z. No Lens Z. No Lens White White D. Backlit/ D. Backlit/ 4. 270° * Use with neon lamps Deadfront Deadfront Z. No L egend Z. No Legend Stop Herefor lighted switches without legends. The switch you have specified will be supplied with a rocker button with lenses, but without legends. Example: K3AAIFNH-44 Note It is not recommended to use green LED’s with translucent white lenses. This will reduce light intensity. Connector: Part Number 801775-2A without latches. Part Number 801775-2B with latches. Panel Seal Gasket: Part Number 807037 . Order separately for use with switches without drain holes. Panel Plug: Part Number K300000040.