K30_V10 BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
Features
30 mm Programmable Multicolor RGB Indicator with Independent Momentary or Latching Touch Button Output Excellent immunity to false triggering by water spray, detergents, oils, and other foreign materials Programmable using Banner's Pro Editor software and Pro Converter Cable Up to 7 colors in one unit Devices are completely self-contained—no controller needed Rated IP67 and IP69K per DIN 40050-9 Ergonomically designed to eliminate hand, wrist, and arm stresses associated with repeated switch operation; no physical force required to operate
12 V DC to 30 V DC operation
Can be actuated with bare hands or gloves; adjustable sensitivity using Pro Editor software Encapsulated construction option on Pro touch models for added protection against condensation and harsh environments WARNING: Do not use this device for personnel protection Using this device for personnel protection could result in serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition. Models Model Key Family Style Activation Method Construction Output State Output Function Color/Control Connector(1) K30 P = Pro T = Touch Blank = Ultrasonically welded A = Normally Open M = Momentary GRY3 = Programmable Multicolor (3 colors, 5-pin) Blank = 2 m (6.5 ft) integral PVC-jacketed cable E = Encapsulated and welded L = Latching RGB7 = Programmable Multicolor (7 colors, 8-pin) Q = Integral 5-pin or 8-pin M12 male quick-disconnect connector, depending on model QP = 150 mm (5.9) PVC cable with a 5- pin or 8-pin M12 male quick-disconnect connector, depending on model(2) Pro Editor Use Banner's Pro Editor software and Pro Converter Cable to create custom configurations by selecting different colors, flash patterns, and animations. For more information visit www.bannerengineering.com/proeditor. © Banner Engineering Corp.
December 18, 2023page 2 K30 Pro Touch Button Datasheet Wiring Diagrams GRY3 Models NPN PNP Key 12-30V dc Load 12-30V dc Load Pin 1 = Brown Pin 2 = White Pin 3 = Blue Pin 4 = Black Pin 5 = Gray Touch toggles output GRY3 Multicolor Color/Function Definition Green Yellow Red Input 1 X X Input 2 X X RGB7 Models NPN PNP Key Load 12-30V dc 7 – Load 12-30V dc Pin 1 = White Pin 2 = Brown Pin 3 = Green Pin 4 = Yellow Pin 5 = Not used Pin 6 = Not used Pin 7 = Blue Pin 8 = Red Touch toggles output RGB Multicolor Color/Function Definition Red Yellow Green Cyan Blue Magenta White Input 1 X X X X Input 2 X X X X Input 3 X X X X Specifications Supply Voltage
12 V DC to 30 V DC
80 mA maximum current at 12 V DC (exclusive of load) 40 mA typical current at 24 V DC (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Leakage Current Immunity 400 µA Output Rating Maximum load: 100 mA ON-state saturation voltage: < 2 V DC at 10 mA; < 2.5 V DC at 150 mA OFF-state leakage current: < 10 µA at 30 V DC Output Response Time Power-Up Delay: 500 milliseconds maximum Input Response: 40 milliseconds maximum Output Response: 300 milliseconds maximum Touch Dwell Time If touch dwells for longer than 60 seconds, the output will revert to the untouched state © Banner Engineering Corp. All rights reserved.
K30 Pro Touch Button Datasheet December 18, 2023 page 3 Operating Conditions Humidity: 90% at +50 °C maximum relative humidity (non- condensing) Environmental Rating IP67, IP69K per DIN 40050-9 Cabled models also meet IP69K per DIN 40050-9 if the cable and cable entrance are protected from high-pressure spray Mounting M22 × 1.5 threaded base, maximum torque 4.5 N·m (40 in·lbf) Construction Base, Dome, and Nut: Polycarbonate Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave) Connections Integral 5-pin or 8-pin M12 male quick-disconnect connector, 2 m (6.5 ft) integral PVC-jacketed cable, or 150 mm (5.9 inch) PVC cable with a 5-pin or 8-pin M12 male quick-disconnect connector, depending on model Integral 5-pin M12 male quick-disconnect connector Models with a quick disconnect require a mating cordset Storage Pro Editor Configuration Connection to Pro Editor software enables control of: Animation: Steady, Flash, Two Color Flash, 50/50, 50/50 Rotate, Chase, Intensity Sweep, Demo Color: Green, Red, Yellow, Blue, White, Cyan, Magenta, Amber, Rose, Lime Green, Orange, Sky Blue, Violet, Spring Green Intensity: Low, Medium, High Speed: Slow, Standard, Fast Output State: Normally Open, Normally Closed, Momentary, Latching, On Delay, Off Delay Touch Sensitivity: Low, Standard, High Logic Type: Three State Advanced Control (F2 Mode), Seven State Advanced Control (F2 Mode), Four State Full Logic (Custom) Pro Converter Cable required to interface between PC and indicator, see accessories Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (A) Supply Wiring (AWG) Required Overcurrent Protection (A) 20 5.0 26 1.0 22 3.0 28 0.8 24 1.0 30 0.5 Certifications Banner Engineering BV Park Lane, Culliganlaan 2F bus 3
1831 Diegem, BELGIUM
© Banner Engineering Corp. All rights reserved.
December 18, 2023page 4 (1) Refer to the CIE 1931 (x,y) Chromaticity Diagram to show equivalent color with indicated color coordinates. Actual coordinates may differ ± 5%. K30 Pro Touch Button Datasheet Default Indicator Characteristics Color Dominant Wavelength (nm)or Color Temperature (CCT) Color Coordinates(1) Lumen Output (Typical at 25 °C) x y Touch Button Models Encapsulated Models Green 522 0.154 0.700 7.7 6.7 Red 620 0.689 0.309 3.1 2.9 Yellow 576 0.467 0.463 7.8 7.7 Blue 466 0.140 0.054 1.7 1.3 White 5700K 0.328 0.337 9.6 9.2 Cyan 493 0.157 0.331 8.7 7.5 Magenta – 0.392 0.186 4.2 3.9 Amber 589 0.556 0.420 5.8 5.4 Rose – 0.525 0.237 3.5 3.3 Lime Green 562 0.383 0.523 10 8.9 Sky Blue 486 0.145 0.240 9.2 7.9 Orange 599 0.616 0.370 4.6 4.3 Violet – 0.224 0.099 3.4 3 Spring Green 508 0.155 0.524 8.0 6.9 FCC Part 15 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Industry Canada ICES-003(B) This device complies with CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif. Dimensions All measurements are listed in millimeters [inches], unless noted otherwise. © Banner Engineering Corp. All rights reserved.
K30 Pro Touch Button Datasheet December 18, 2023 page 5 54.5 mm (2.15 in) 23.5 mm (0.93 in) M22 × 1.5 M12 × 1 Accessories Pro Editor Hardware PRO-KIT Includes: Pro Converter Cable (MQDC-506-USB) Splitter (CSB-M1251FM1251M) Power Supply (PSW-24-1) MQDC-506-USB Pro Converter Cable 1.83 m (6 ft) length 5-pin M12 quick disconnect to Device and USB to PC Required for connection to Pro Editor CSB-M1251FM1251M 5-pin parallel Y splitter (Male-Male-Female) For full Pro Editor preview capability Requires external power supply, sold separately PSW-24-1
24 V DC, 1 A power supply
2 m (6.5 ft) PVC cable with M12 quick disconnect Provides external power with splitter cable, sold separately ACC-PRO-CABLE5 Mating accessory for cabled and terminal models 150 mm (6 inch) PVC cable with M12 quick disconnect Lever wire nuts included (qty 5) Required to connect cabled models and screw terminal models to Pro Converter Cable, sold separately x5 MQDC-801-5M-PRO 8-pin to 5-pin double-ended cordset 0.31 m (1 ft) PVC cable with M12 quick disconnects Required to connect 8-pin Pro Series-enabled devices to Pro Converter Cable (MQDC-506- USB), sold separately © Banner Engineering Corp. All rights reserved.
December 18, 2023page 6 K30 Pro Touch Button Datasheet Cordsets 5-Pin Threaded M12 Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.5 m (1.5 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-503 0.9 m (2.9 ft) MQDC1-506 2 m (6.5 ft) MQDC1-515 5 m (16.4 ft) MQDC1-530 9 m (29.5 ft) MQDC1-560 18 m (59 ft) MQDC1-5100 31 m (101.7 ft) MQDC1-506RA 2 m (6.5 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 5 m (16.4 ft) MQDC1-530RA 9 m (29.5 ft) MQDC1-560RA 19 m (62.3 ft) 5-Pin Threaded M12 Stainless Steel Washdown Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC-WDSS-0506 2 m (6.56 ft) Straight 43.5 mm Ø4.8 mm Ø15.5 mm 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC-WDSS-0515 5 m (16.4 ft) MQDC-WDSS-0530 9 m (29.5 ft) 8-Pin Threaded M12 Cordsets with Open-Shield—Single Ended Model Length Style Dimensions Pinout (Female) MQDC2S-806 2.04 m (6.7 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red MQDC2S-815 5.04 m (16.54 ft) MQDC2S-830 10.04 m (32.95 ft) MQDC2S-850 16 m (52.49 ft) MQDC2S-806RA 2 m (6.56 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC2S-815RA 5 m (16.4 ft) MQDC2S-830RA 10 m (32.81 ft) MQDC2S-850RA 16 m (52.49 ft) © Banner Engineering Corp. All rights reserved.
K30 Pro Touch Button Datasheet December 18, 2023 page 7 8-Pin Threaded M12 Cordsets with Open-Shield—Washdown, Stainless Steel Model Length Style Dimensions Pinout (Female) MQDC-WDSS-0806 2 m (6.56 ft) Straight 44 Typ. ø 14.5 M12 x 1 MQDC-WDSS-0815 5 m (16.4 ft) MQDC-WDSS-0830 9 m (29.53 ft) 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red Brackets SMB22A Right-angle bracket with curved slot for versatile orientation 12-ga. stainless steel Mounting hole for 22 mm sensor Hole center spacing: A to B = 26.0 Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2 A B C SMB22FVK V-clamp, flat bracket and fasteners for mounting to pipe or extensions Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions 22 mm hole for mounting sensor Hole size: A = ø 22.5 46 118 A ø22.5 SMB22RAVK V-clamp, right-angle bracket and fasteners for mounting to pipe or extensions Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions 22 mm hole for mounting sensor Hole size: A = ø 22.5 A SMBAMS22P Flat SMBAMS series bracket with 22 mm hole for mounting sensors Articulation slots for 90+° rotation 12-ga. (2.6 mm) cold-rolled steel Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5 93 A C B SMBAMS22RA Right-angle SMBAMS series bracket with 22 mm hole for mounting sensors Articulation slots for 90+° rotation 12-ga. (2.6 mm) cold-rolled steel Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5 A C B © Banner Engineering Corp. All rights reserved.
December 18, 2023page 8 K30 Pro Touch Button Datasheet LMB22LPC For 28 mm tubular racking Toolless mount to racking 22 mm mounting hole Ø22 Ø27.8 Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. Document title: K30 Pro Touch Button - Datasheet Part number: 223109 Revision: C Original Instructions © Banner Engineering Corp. All rights reserved. 223109 © Banner Engineering Corp. All rights reserved.