K30_V09 BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Lighted touch button with bipolar outputs

  • FDA-grade materials; rated to IEC IP67, IP68, and IP69K
  • Laser marked information withstands aggressive cleaning procedures
  • Excellent immunity to false triggering by water spray, detergents, oils, and other foreign materials
  • Rugged, cost-effective, and easy-to-install touch button with multicolor light
  • Momentary versions remain activated as long as touch is present
  • Latching versions start up not activated and toggle between activated and not activated on successive touches
  • Ergonomically designed to eliminate hand, wrist, and arm stresses associated with repeated switch operation; require no physical force to operate
  • Can be actuated with bare hands or in gloves
  • 12 to 30 V dc operation Models Model 1 Function Output Light (not activated) Light (activated) Connection K30ALBT2FXGHQP Latching Bipolar, N.O. - Green 150 mm (6 in) pigtail PVC cable with a 5-pin M12/ Euro-style male, stainless steel, quick disconnect (QD) K30RLBT2FXGHQP Bipolar, N.C. K30ABT2FXGHQP Momentary Bipolar, N.O. K30RBT2FXGHQP Bipolar, N.C. K30ALBT2FGGHQP Latching Bipolar, N.O. Green Green K30RLBT2FGGHQP Bipolar, N.C. K30ABT2FGGHQP Momentary Bipolar, N.O. K30RBT2FGGHQP Bipolar, N.C. K30ALBT2FRGHQP Latching Bipolar, N.O. Red Green K30RLBT2FRGHQP Bipolar, N.C. K30ABT2FRGHQP Momentary Bipolar, N.O. K30RBT2FRGHQP Bipolar, N.C. Specifications Supply Voltage 12 to 30 V dc Supply Current 55 mA max current (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Power-Up Delay 300 milliseconds Latching models start up in a 'not activated' state Output Rating Maximum Load: 150 mA ON-state saturation voltage: < 2 V at 10 mA dc; < 2.5 V at 150 mA dc OFF-state leakage current: <10 µA at 30 V dc Output Response Time 150 milliseconds ON and OFF 1 To order the 2 m (6.5 ft) cable models, omit suffix QP from model number (example, K30ALBT2FXGH). A model with a QD requires a mating cable (see Cordsets on page 3). EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons Original Document 189833 Rev. C

10 February 2016

2 m (6.5 ft) PVC integral cable, or 150 mm (6 in) pigtail PVC cable with a 5-pin M12/Euro-style male, stainless steel, quick disconnect (QD) Construction Base, dome, and nut: FDA-grade polycarbonate Mounting M22 × 1.5 Threaded base, max torque 2.25 Nm (20 in-lbf) Environmental Rating IEC IP67, IP69K per DIN 40050-9. Operating Conditions 90% at 50 °C maximum relative humidity (non-condensing) Storage Vibration and Mechanical Shock Vibration 10 Hz to 55 Hz 1.0 mm p-p amplitude per IEC 60068-2-6 Shock 30G 11 ms duration, half sine wave per IEC 60068-2-27 Certifications Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to http:// www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Dimensions M22 X 1.5 30.0 [1.18] 41.0 [1.62] 23.5 [.93] Wiring Diagram Bipolar Color Key Load Load 12-30V dc Not Used 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Cabled wiring diagrams are shown. Quick disconnect (QD) wiring diagrams are functionally identical. EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 189833 Rev. C

5-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.50 m (1.5 ft) Straight 44 Typ. ø 14.5 M12 x 1 2 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) MQDC1-506RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 4.57 m (15 ft) MQDC1-530RA 9.14 m (30 ft) 5-Pin Threaded M12/Euro-Style Cordsets—Washdown Stainless Steel Model Length Style Dimensions Pinout (Female) MQDC-WDSS-0506 1.83 m (6 ft) Straight 43.5 mm Ø4.8 mm Ø15.5 mm 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC-WDSS-0515 4.57 m (15 ft) MQDC-WDSS-0530 9.14 m (30 ft) 5-Pin Threaded M12/Euro-Style Cordsets—Washdown, with Shield Model Length Style Dimensions Pinout (Female) MQDCWD-506 1.83 m (6 ft) Straight 42 Typ.[1.65"] ø 15.0[0.57"] M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDCWD-530 9.14 m (30 ft) EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons P/N 189833 Rev. C www.bannerengineering.com - Tel: +1-763-544-3164 3

  • Right-angle bracket with curved slot for versatile orientation
  • 12-ga. stainless steel
  • Mounting hole for 22 mm sensor 46 AB C Hole center spacing: A to B = 26.0 Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2 SMB22FVK
  • V-clamp, flat bracket and fasteners for mounting to pipe or extensions
  • Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions
  • 22 mm hole for mounting sensor 46 118 34Aø22.5 Hole size: A = ø 22.5 SMB22RAVK
  • V-clamp, right-angle bracket and fasteners for mounting to pipe or extensions
  • Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions
  • 22 mm hole for mounting sensor A Hole size: A = ø 22.5 SMBAMS22P
  • Flat SMBAMS series bracket with 22 mm hole for mounting sensors
  • Articulation slots for 90+° rotation
  • 12-ga. (2.6 mm) cold-rolled steel 93 A C B Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5 SMBAMS22RA
  • Right-angle SMBAMS series bracket with 22 mm hole for mounting sensors
  • Articulation slots for 90+° rotation
  • 12-ga. (2.6 mm) cold-rolled steel A C B Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5 TC-K30-CL
  • Touch cover Ø A B Diameter: A = 40.7 Height: B = 31 All measurements are listed in millimeters, unless noted otherwise. Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Illuminated Buttons www.bannerengineering.com - Tel: +1-763-544-3164