K300 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Copyright © 2022 Sensata Technologies, Inc. www.sensata.com | K300 Platform Control System for battery powered scissor lift Main Features Introduction

  • Four push button switches with LED backlit indicators
  • Direction control switches integrated in the joystick grip
  • 7 segment displays on both PCU and CPU for diagnostic
  • Emergency Stop Pushbutton The K300 Platform Control System provides the reliability required in demanding applications such as Mobile Elevating Work Platforms; K300 is committed to the full control of DC battery powered self-propelled scissor lift. The key parts of the K300 Kit are the PCU300 (Platform Control Unit) and the ECU300 (Electronic Control Unit). The 2 units have been conceived as building block elements able to connect a variety of digital and analog machine interfaces such as joysticks, sensors, limit switches, LEDs , motor controller, pushbuttons, e-stop, alarms and control them through a CAN-bus system. Custom Modifications
  • Custom overlay graphics
  • Custom grip
  • 30 functionally configurable Input/Output signals SPECIFICATIONS PCU300 Platform Control Unit ECU300 Electronic Control Unit PCU300 ECU300 Supply Ratings Nominal Voltage: 12V or 24V DC Max. Voltage Range: 10V-30V Max. output voltage: V supply DC N/A Other Electrical Characteristics N/A ESD: +/- 6KV Contact, +/-8KV Air Discharge per IEC 61000-4-2 Electrical PCU300 ECU300 Operating temperature -40 °C to 85 °C Protection Level IP65 (after installed) IP25 Life Joystick > 5 million cycles Pushbuttons > 1million cycles N/A Mechanical OBSOLETE

Copyright © 2022 Sensata Technologies, Inc. www.sensata.com Page 2 DIMENSIONS PCU300 Platform Control Unit Pin 1 Ground Pin 2 Serial Data High Pin 3 E-Stop Out (+24V out) Pin 4 +24V in Pin 5 Serial Data Low Pin 6 Unused Connector: 6 Pin, SIBAS HQ-005-M; Pin Current Rating 7.5Amps ECU300 Electronic Control Unit Connector: 36 Pin, AMP 344108-1; Pin Current Rating 10Amps; gold plating on mating area of pins Pin I/O Type Pin I/O Type Pin I/O Type 1A 0-24V Digital Input 1B Serial Data High 1C Serial Data Low 2A 2.5A/24V Digital Output 2B 0-24V Digital Input 2C Power Input 3A 2.5A/24V Digital Output 3B Ground 3C 0-5V Analog Input 4A Power Input 4B 4~20mA Analog Input 4C 0-5V Analog Output 5A Power Input 5B Digital Input w/ 2.2K pull up 5C Digital Input w/ 2.2K pull up 6A 2.5A/24V Digital Output 6B 2.5A/24V Digital Output 6C 2.5A/24V Digital Output 7A 2.5A/24V Digital Output 7B 2.5A/24V Digital Output 7C 2.5A/24V Digital Output 8A 2.5A/24V Digital Output 8B 2.5A/24V Digital Output 8C 2.5A/24V Digital Output 9A 0-5V Analog Output 9B Alarm OC Input 9C 2.5A/24V Digital Output 10A 0-24V Digital Input 10B 0-24V Digital Input 10C 0-24V Digital Input 11A 0-5V Analog Input 11B 0-24V Digital Input 11C 0-24V Digital Input 12A 0-24V Digital Input 12B 0-24V Digital Input 12C 0-24V Digital Input PCU300 Platform Control Unit ECU300 Electronic Control Unit All dimensions are in inches [millimeters] OBSOLETE

www.sensata.com Copyright © 2022 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Page 3 Rev:03/03/22 CONTACT US INDUSTRIAL SOLUTIONS DIVISION Americas +1 (800) 350 2727 sensors.deltatech@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 ost-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 ORDERING OPTIONS 8C40002CC0007-02 Part Number 8C40002CC0007-02 (A) K300 Product Platform Control Kit for DC vehicle

Description

(A) K300 Kit includes: Part Number Product Description 8C40002CC0008-01 PCU300 Platform Control Unit 8C40002CC0001-01 ECU300 Electronic Control Unit 8C40002CC0005-01 MC300 Accessory - Motor Controller 24/36V 275Amp OBSOLETE