K2D130W CPI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
K2 UHF-TV Cavity Amplifier The EIMAC K2D130W Klystrode ® Inductive Output T ube (IOT) is a high efficiency amplifier tube for use in digital UHF television service as the output stage of DTV transmitters. The K2 series is suitable for use with 8VSB, COFDM and similar modulation schemes. The K2 cavity amplifier, is comprised of a single tube, K2D130W , and associated hardware assembly, HA2000. The cavity amplifier covers the entire UHF TV band from 470—815 MHz (bands IV and V). The K2 amplifier series has an advanced Electro-Magnetic- Compatibility (EMC) designed input circuit, which isolates the RF input from the transmitter DC high voltage. The input filter circuit is optimized for the sharp rise-time, short duration pulses of DTV , simplifying transmitter pre-correction. The input circuit has a stable, out-of-the- way storage position and utilizes a cam-guided insertion mechanism to ensure positive connection to the IOT .
- Designed for 8VSB operation
- Peak power capabilities of 130 kW with average power of 31 kW
- High gain amplifier: 22 dB minimum
- Long life, high reliability with dispenser type cathode and pyrolytic graphite grid
- Single tube and circuit: 470 to 815 MHz
- User-friendly tuning
- T ube replacement does not require disconnection of power supply or cooling water
- Compact size with “collector (water) down”
- Water-cooled collector and output cavity. Air-cooled electron gun and anode.
- Made in the USA - ISO 9001 facility Electron gun and cavity air-cooling is improved with the new K2 air plenum design. T ube replacement and maintenance is a simple matter for one person without requiring hoists or removing the cavity assembly from the transmitter cabinet. Coolant lines or power supplies do not have to be disconnected. In DTV digital transmission, the K2D130W Klystrode® IOT can be used at up to 130 kW peak power with average power levels of 30 kW for 8 VSB operation (for details please contact Eimac Division, CPI Inc., Klystrode ® IOT Applications Engineering). The input cavity, the output cavity, focus magnet assembly, arc detector, water-jacket and load coupler are mounted on a rugged wheeled support stand which is compatible with transmitters from all manufacturers. Made in USA
For More Detailed Information: Contact CPI MPP / Eimac Operation, IOT Applications Engineering
607 Hansen Way, Palo Alto, CA 94304 Phone: 650-592-1221, Fax: 650-592-9988
www.cpii.com or e-mail to: klystrode@cpii.com Characteristics and typical operating conditions are subject to change without notice. CPI, Eimac Division should be consulted before using this information for final equipment design. Klystrodeand Eimac are registered trademarks of CPI. Vacion is a registered trademark of Varian Associates, Inc. Summary Data ELECTRICAL Focus Magnet (current regulated): MECHANICAL K2D130W Klystrode IOT HA2000 Hardware Assembly Output RF connector: Standard 3-1/8 inch, 50 Ohm coaxial line (Alternate 4-1/16 inch, 50 Ohm coaxial line available - user to specify). * Current must be limited by the supply Operational Characteristics DTV Service (8VSB): Cooling1 Arc Detector T wo (2) photo resistors and test lamps are located in the output cavities which must be used for protection of the tube from cavity arc damage. ION Pump A getter ion pump requiring 3-4 kV with respect to the heater is provided. NOTE 1: The recommended coolant flow rate for pure demineralized water is 10 GPM. When using a 50/50 glycol/water mix, Eimac recommends the flow rate be set at 20 GPM. Regardless of the coolant mixture, should audible evidence of boiling be heard, which sounds like rattling, the coolant flow rate must be immediately increased or the equipment shut down. Annual replacement of the coolant, such as Dowtherm 4000 or Dowtherm SR-1, is recommended to avoid glycol breakdown.