K1V26W SHINDENGEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Copyright & Copy;2000 Shindengen Electric Mfg.Co.Ltd RATINGS SHINDENGEN OUTLINE DIMENSIONS (Unit : mm) Sidac K1V26(W) Case : AX10
- Absolute Maximum Ratings Item Symbol Conditions Ratings Unit Storage Temperature Tstg -40 ～125 ℃ Operating Junction Temperature Tj 125 ℃ Maximum Off-state Voltage VDRM 180 V RMS On-state Current I T Tl = 91℃, 50Hz sine wave (θ = 180°） 1 A Surge On-state Current ITSM Tj = 25℃, 50Hz sine wave (θ = 180°）, 16A non-repetitive 1-cycle peak value Ta =25 ℃, pulse width to = 10 μs, sine wave, 17 Pulse On-state Current ITRM repetitive peak value f = 1 kHz A Ta =25 ℃, pulse width to = 10 μs, sine wave, 50 repetitive peak value f = 60 Hz Critical Rate of Rise of On-state Current diT/dt 80 A/ μs
- Electrical Characteristics (Tl=25℃) Item Symbol Conditions Ratings Unit Breakover Voltage VBO IB = 0, 50Hz sine wave 240～265 V Off-state Current IDRM VD = VDRM Max 10 μA Breakover Current IBO Max 0.5 mA Holding Current IH TYP 50 mA On-state Voltage VT IT = 1A Max 3.0 V Switching Resistance RS Min 0.1 kΩ Thermal Resistance θjl Junction to lead Max 15 ℃/W
- Standard Design with P.C.B. Item Symbol Conditions Standard Unit RMS On-state Current IT Assembled in P.C.B., Ta = 25℃, 0.55 A soldering land 3mmφ
0.2 0.4 0.6 0.8 K1V22(W) K1V24(W) K1V26(W) Pulse measurement Tl=125°C [TYP] Tl=25°C [TYP] Instantaneous On-State Voltage V T [V] Instantaneous On-State Current I T [A] Typical On-State Voltage
0.4 0.8 1.2 1.6 2.4 2.8 3.2 K1V22(W) K1V24(W) K1V26(W) Tj=125°C Sine Wave Conduction Angle 180 ° On-State Current I T (rms) [A] Power Dissipation P [W]
0.2 0.4 0.6 0.8 1.2 1.4 40 60 80 100 120 140 K1V22(W) K1V24(W) K1V26(W) Tj=125°C Sine Wave Conduction Angle 180 ° Allowable Lead Temperature Tl [ °C] On-State Current I T (rms) [A]
Maximum Ambient Temperature 0.2 0.4 0.6 0.8 1.2 0 20 40 60 80 100 120 140 K1V22(W) K1V24(W) K1V26(W) Tj=125°C Sine Wave Conduction Angle 180 ° Allowable Ambient Temperature Ta [ °C] On-State Current I T (rms) [A] Mounted on PCB 20mm l Soldering land 3mm φ l = 2~15mm
Maximum Surge On-State Current 1 10 100 K1V22(W) K1V24(W) K1V26(W) Non-repetitive Sine Wave 50Hz Conduction Angle 180 ° Free In Air Tj = 25°C 2 5 20 50 Number of Cycles [cycles] Surge On-State Current I TSM [A]
Pulse On-State Current Rating 100 1000 1 10 100 K1V22(W) K1V24(W) K1V26(W) IP 1/f Current Wave Form Free in air Sine Wave Ta = 25°C diT/dt limit line f = 1 ~ 120Hz f = 1kHz f = 5kHz 2 20 50 2005 Pulse Base Width t0 [µs] Peak Pulse On-State Current I P [A]
Pulse On-State Current Derating 0.2 0.4 0.6 0.8 1.2 0 20 40 60 80 100 120 140 K1V22(W) K1V24(W) K1V26(W) IP 1/f Current Wave Form Free in air Sine Wave Ta = 25°C f = 1 ~ 5kHz f = 1 ~ 120Hz Ambient Temperature Ta [ °C] Pulse On-State Current Ratio I P(T) / IP(Ta=25°C)
0.1 100 K1V22(W) K1V24(W) K1V26(W) 10-4 10-3 10-2 10-1 100 101 102 103 0.05 0.50.2 20 5052 200 500 2000 5000 θja θjl Transient Thermal Resistance Duration t [s] Transient Thermal Resistance θja θjl [°C/W] Mounted on PCB 20mm l Soldering land 3mm φ l = 2~15mm
Breakover Voltage - Junction Temperature 0.8 0.85 0.9 0.95 1.05 1.1 K1V22(W) K1V24(W) K1V26(W) -40 -20 0 20 40 60 80 100 120 140 0.05 0.50.2 20 5052 200 500 2000 5000 Junction Temperature Tj [ °C] Breakover Voltage Ratio VBO(T) / VBO(Tj=25°C)