K1700A MTRONPTI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
! Applications: Phase Lock Loops Clocking Sync to NTSC Video Standards; Reference Signal; Signal Tracking; ATM ! 2.0 to 35.0 MHz Frequency Range ! ±10ppm Frequency Stability - (0oC to 70oC) K1710 ! ±20ppm Frequency Stability - (-40oC to 85oC) K1720 ! -40°C to 85°C Operating Temperature ! TTL/CMOS Compatible ! Meets Stratum IV Stability Requirements ! Hermetically Sealed Package ELECTRICAL SPECIFICATIONS 800-888-1499 or www.champtech.com /MT75/MT49/MT55/MT88/MT48/MT65/MT67 /MT50/MT48/MT46/MT48/MT48/MT48/MT32/MT77/MT72/MT90 /MT67/MT84/MT73/MT32/MT68/MT65/MT84/MT69/MT32/MT67/MT79/MT68/MT69 /MT55/MT44/MT52/MT57/MT32/MT109 /MT109/MT32/MT77/MT97/MT120/MT46/MT50/MT48/MT44/MT56/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT49/MT51/MT44/MT50/MT32/MT109/MT109/MT32/MT77/MT97/MT120/MT46 /MT80/MT73/MT78/MT32/MT49 Model K1710AC Frequency Range (MHz) Input Current (mA) 2.0 to 35 < 30 Frequency Control Function Deviation (ppm) Minimum (ppm) Maximum ±120 Linearity (%) ±60 Modulation Bandwidth (±3dB) Nominal Control Voltage (V) Control Voltage Range (V) Transfer Function Input Impedance < 10 > 20KHz 2.5 0.5 to 4.5 Positive > 50KΩ @ 10KHz Frequency Stability (ppm) Overall 0oC to 70oC Temperature Range (oC) Inclusive of Calibration, Temperature, Voltage, Load, Aging ±10 Operating Storage 0oC to +70oC -40oC to +85oC Supply Voltage (V) Start Up Time (ms) +5.0V ±5% <10 Typical SSB Phase Noise (dBC/Hz) Offset from Carrier 10Hz -65 100Hz 1KHz 10KHz 100KHz -95 -120 -140 -150 (For Custom Deviation Range, Vc Range, etc. - Consult Factory) -40oC to 85oC Symmetry CMOS/TTL 45/55 < 16MHz; 40/60 ≥ 16MHz K1720ACM ±20- Aging, 10 Years ±3.0 -40oC to +85oC PART NUMBERING GUIDE K17X0AX - Specify Frequency Blank = 0°C to 70°C Operating Temp. M = -40°C to +85°C Operating Temp. K1720 Only 1 = ±10ppm, 0°C to 70°C Operating Temp. 2 = ±20ppm, -40°C to +85°C Operating Temp. K1700A Series 5V Temperature Compensated Voltage Controlled Crystal Oscillators
Gnd/ & Case Gnd Output + VCC 800-888-1499 or www.champtech.com SHIPPING TUBE CROSS SECTION K1700A Series 5V Temperature Compensated Voltage Controlled Crystal Oscillators TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15gs; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B Electrostatic Discharge Solderability Hermeticity Resistance to Soldering Lead Integrity Marking Permanence Life Test 100°C to 0°C; Water-to-Water; 15 cycles
2 KV to 4 KV Threshold
Solder dip; Meniscograph Criteria Mass spectro. 2 x 10-8 atmos. CC/sec He 260°C; 10 seconds: 1 inch/sec. Lead tension & bend stress Resistance to solvents 1500 gs MIL-STD-883, Mtd 3015 Class II MIL-STD-883, Mtd 1005.6 MIL-STD-883, Mtd 2022.2 MIL-STD-883, Mtd 1014.8, Cond. A1 MIL-STD-202, Mtd 210A, Cond. C MIL-STD-883, Mtd 2004.5, Cond. A, B1 MIL-STD-883, Mtd 2015.8 125°C, powered, 1000 hours minimum MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM